![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Junior Member
Join Date: May 15, 2000
Posts: 9
|
What dies should I use to load 9x23 Winchester on my Dillon XL650? What shellplate? Dillon says to use their 9mm dies, but I have been told by others that this is not the best setup. What would be the ideal setup?
|
![]() |
![]() |
#2 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
Use the 9mm shellplate, and you can get 9x23 dies from RCBS and Lyman.
|
![]() |
![]() |
#3 |
Junior Member
Join Date: May 15, 2000
Posts: 9
|
Thanks WeShoot2. Does anyone else have any recommendations on the ideal setup for loading 9x23 on my Dillon 650?
|
![]() |
![]() |
#4 |
Senior Member
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
|
I use a RCBS sizer die, A Redding competion 38 super seating die, and a Dillon 9mm crimper die. If I use Winchester brass I use a number 5 shellplate,and when I use Starline brass I use number 3 shellplate. My press is a Dillon 550. I use only Starline brass now and I think it is a lot better brass. What kind of recommendations are you looking for.
|
![]() |
![]() |
|
|