![]() |
![]() |
#1 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 4,073
|
Brazos bullet problems
If you have any Brazos bullets, you might want to double check them with calipers before loading.
I have bought 5 batches of bullets from them, 15lb each, 9mm, about 820 per batch. First batch I ordered was 0.3560. I measured several, they were spot on. I ordered more and did not think to check My 4 most recent batches, ordered in 0.357, all with labels stating 0.357 Make sure to double check yours if you have any. Will be contacting Brazos tomorrow. the results, all should be 0.357... #1 .3555 .3555 .3555 .3560 .3560 .3555 .3560 .3560 .3555 .3560 #2 .3560 .3560 .3560 .3560 .3560 .3560 .3560 .3560 .3560 .3560 #3 .3560 .3555 .3555 .3560 .3550 .3560 .3555 .3560 .3560 .3560 #4 .3560 .3560 .3560 .3565 .3560 .3560 .3560 .3560 .3560 .3560
__________________
I don't believe in "range fodder" that is why I reload. |
![]() |
![]() |
#2 |
Senior Member
Join Date: July 8, 2015
Posts: 1,021
|
I’ve used them for years in many pistol matches. Never had a problem. Great bullets.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
#3 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 4,073
|
Good to hear. My first batch was on point, I ordered .356, and I checked a bunch, and they all measured correctly. These last 4 batches at .357 I got were all out of spec.
__________________
I don't believe in "range fodder" that is why I reload. |
![]() |
![]() |
#4 |
Senior Member
Join Date: July 8, 2015
Posts: 1,021
|
Sounds like they just grabbed the wrong bags by mistake. Understandable mistake given how crazy things have been. Notice however how consistent the bullet sizing is (even though they grabbed the wrong size). They are good Bullets and a good company. I’m sure they’ll make it right if you contact them.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
#5 | |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 4,073
|
Quote:
Gonna call them tomorrow, hoping they can get me squared away. I have around 2400 of them currently and was hoping to be able to shoot them....
__________________
I don't believe in "range fodder" that is why I reload. |
|
![]() |
![]() |
#6 |
Senior Member
Join Date: July 31, 2005
Location: Lubbock Texas
Posts: 560
|
Call them great folks. I had problems with some they made it right.
Good luck Roc1 |
![]() |
![]() |
#7 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
.355" and .356" are normal diameters for 9mm jacketed and cast respectively. Either should work ok though.
"...being made to order..." Not likely. |
![]() |
![]() |
#8 | |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 4,073
|
Quote:
For reference, Should work and did work are not the same thing. This is my barrel after less than 50rnds, from a clean barrel....
__________________
I don't believe in "range fodder" that is why I reload. |
|
![]() |
![]() |
|
|