.223 Rem Brass For Sale in Texas

m&p45acp10+1 · December 27, 2014, 12:01 PM

I have a USPS medium flat rate box full of range pick up brass. I have tumbled most of it. I have sorted it out to weed out the cases that are obviously not usable, as well as used a magnet to assure no steel is in it either. Head stamps are mixed. A lot of PMC, and Lake City. There are others in there as well. There is nothing in the box that I would not run through my own dies. I have way more than what I need, and am making room to get my seed starts for the coming garden going. (Growing super hot peppers this year. If I run low on powder the Carolina Reaper powder may end up as a substitute.

)

$65 Shipped

Note there are well over 1K pieces.

m&p45acp10+1 · December 28, 2014, 11:59 AM

This pic was taken before I tumbled, and inspected the brass. The brass is bagged in taped shut bags to keep them box from coming open from the not so gentle handling of the USPS. Over 1200 cases that are ready to lube, and size.

$65 includes the shipping.

Note I have enough to fill a Large Flat rate box.

If you want that instead it would be $80 Shipped.

m&p45acp10+1 · December 30, 2014, 05:29 PM

I guess I am going to have to post a pic of the cleaned, and bagged brass. I stopped counting at a thousand, and just kept filling bags with the cleaned brass.

Did I mention I sorted out all the ones that were obviously not usable. The price is better than most places that send you dirty brass that you end up scrapping more than a few of.

Price is the same $65 includes the price of shipping.

Panfisher · December 31, 2014, 04:35 PM

Any rough idea how many might be in the big box, I have some empty ammo cans that are begging for more empty cases. Especially cleaned ones.

**Unclenick** · December 31, 2014, 05:49 PM

In post #2 he said over 1200.

Panfisher · January 1, 2015, 10:41 AM

I wasn't sure if that was the medium or the big box number.

m&p45acp10+1 · January 1, 2015, 04:57 PM

Panfisher I know there are well over 1200 that will fit in the medium box. The large one has a higher price due more to a higher cost to ship it. The 1200 + are have been tumbled in walnut media, and are clean. Not super squeaky like new shining, but clean enough to load with, and inspect.

Sorry it took a while to respond. I have been working to get my seed starting for super hot peppers going which has been time consuming. It involved building a 4 tier shelf system, wiring up lights, cutting wood for shelves, hanging the fan, getting the height for the lights correct for seed starts. Setting up heat mats, setting up the thermostats for the heat mats, a timer for the fan, and lights. Prepping up the seed starting mix, filling up the starter pots. Sewing the seeds. Well that is the easy part for me anyway. The hard part is waiting for things to sprout.

I had the brass in the closet I am using, and need the space so I am offering it here. As far as the rest that would fill a large flat rate box I will sort though to get the bad ones out. I can sweeten the pot up a little if you want some .38 Special cases as I have a bunch of those to throw in, as well as a hand full of .357 Mag.

I also have some cast bullets I would be willing to add in. What I have: 100 cast 240 grain LSWC for .44 that drop at about .430. They shoot great in my Bull Dog. I cast others though I am out at this time, and casting will be next on the to do list when the rain, and ice let up.

Panfisher · January 1, 2015, 07:10 PM

I just got home from a rabbit hunt. Will send you a pm after I get stuff put away.

Panfisher · January 2, 2015, 11:54 AM

I tried to PM you from my phone, let me know if it did not come through and I will send it from a real computer.

m&p45acp10+1 · January 2, 2015, 05:06 PM

I should have read this first. I just responded to a PM from another member.

RC20 · January 3, 2015, 12:11 AM

I think this belongs in the Sales section

m&p45acp10+1 · January 4, 2015, 04:34 PM

RC20 reloading supplies, and tools can be listed in this forum. See the rules sticky at the top of the page. It is due to the fact that it is a niche within a niche, and it makes it more easy for those that reload to see the post.

m&p45acp10+1 · January 4, 2015, 04:44 PM

On hold pending sale.

m&p45acp10+1 · January 21, 2015, 08:19 PM

Mods feel free to close this one.

Brass has been sold, and shipped out.

Thanks all,

Nate

December 27, 2014, 12:01 PM	#1
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	.223 Rem Brass For Sale in Texas I have a USPS medium flat rate box full of range pick up brass. I have tumbled most of it. I have sorted it out to weed out the cases that are obviously not usable, as well as used a magnet to assure no steel is in it either. Head stamps are mixed. A lot of PMC, and Lake City. There are others in there as well. There is nothing in the box that I would not run through my own dies. I have way more than what I need, and am making room to get my seed starts for the coming garden going. (Growing super hot peppers this year. If I run low on powder the Carolina Reaper powder may end up as a substitute. ) $65 Shipped Note there are well over 1K pieces. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

December 30, 2014, 05:29 PM	#3
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	I guess I am going to have to post a pic of the cleaned, and bagged brass. I stopped counting at a thousand, and just kept filling bags with the cleaned brass. Did I mention I sorted out all the ones that were obviously not usable. The price is better than most places that send you dirty brass that you end up scrapping more than a few of. Price is the same $65 includes the price of shipping. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

December 31, 2014, 05:49 PM	#5
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,742	In post #2 he said over 1200. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle

January 1, 2015, 04:57 PM	#7
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	Panfisher I know there are well over 1200 that will fit in the medium box. The large one has a higher price due more to a higher cost to ship it. The 1200 + are have been tumbled in walnut media, and are clean. Not super squeaky like new shining, but clean enough to load with, and inspect. Sorry it took a while to respond. I have been working to get my seed starting for super hot peppers going which has been time consuming. It involved building a 4 tier shelf system, wiring up lights, cutting wood for shelves, hanging the fan, getting the height for the lights correct for seed starts. Setting up heat mats, setting up the thermostats for the heat mats, a timer for the fan, and lights. Prepping up the seed starting mix, filling up the starter pots. Sewing the seeds. Well that is the easy part for me anyway. The hard part is waiting for things to sprout. I had the brass in the closet I am using, and need the space so I am offering it here. As far as the rest that would fill a large flat rate box I will sort though to get the bad ones out. I can sweeten the pot up a little if you want some .38 Special cases as I have a bunch of those to throw in, as well as a hand full of .357 Mag. I also have some cast bullets I would be willing to add in. What I have: 100 cast 240 grain LSWC for .44 that drop at about .430. They shoot great in my Bull Dog. I cast others though I am out at this time, and casting will be next on the to do list when the rain, and ice let up. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

January 2, 2015, 05:06 PM	#10
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	I should have read this first. I just responded to a PM from another member. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

December 28, 2014, 11:59 AM	#2
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	This pic was taken before I tumbled, and inspected the brass. The brass is bagged in taped shut bags to keep them box from coming open from the not so gentle handling of the USPS. Over 1200 cases that are ready to lube, and size. $65 includes the shipping. Note I have enough to fill a Large Flat rate box. If you want that instead it would be $80 Shipped. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

December 31, 2014, 04:35 PM	#4
Panfisher Senior Member Join Date: July 30, 2010 Location: Missouri Posts: 1,337	Any rough idea how many might be in the big box, I have some empty ammo cans that are begging for more empty cases. Especially cleaned ones.

January 1, 2015, 10:41 AM	#6
Panfisher Senior Member Join Date: July 30, 2010 Location: Missouri Posts: 1,337	I wasn't sure if that was the medium or the big box number.

January 1, 2015, 07:10 PM	#8
Panfisher Senior Member Join Date: July 30, 2010 Location: Missouri Posts: 1,337	I just got home from a rabbit hunt. Will send you a pm after I get stuff put away.

January 2, 2015, 11:54 AM	#9
Panfisher Senior Member Join Date: July 30, 2010 Location: Missouri Posts: 1,337	I tried to PM you from my phone, let me know if it did not come through and I will send it from a real computer.

January 3, 2015, 12:11 AM	#11
RC20 Senior Member Join Date: April 10, 2008 Location: Alaska Posts: 7,334	I think this belongs in the Sales section

January 4, 2015, 04:34 PM	#12
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	RC20 reloading supplies, and tools can be listed in this forum. See the rules sticky at the top of the page. It is due to the fact that it is a niche within a niche, and it makes it more easy for those that reload to see the post. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

January 4, 2015, 04:44 PM	#13
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	On hold pending sale. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

January 21, 2015, 08:19 PM	#14
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	Mods feel free to close this one. Brass has been sold, and shipped out. Thanks all, Nate __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.