|
April 24, 2012, 05:50 PM
|
#1 |
|
Member
Join Date: February 29, 2012
Posts: 21
|
38 special reload data
I have a box of Speer 125 gr JSP bullets for 38 Special and cannot find reload data for it. Does anyone have the measurements for using Unique and Titegroup powder. Much appreciated if anyone has this info
|
|
|
April 24, 2012, 07:06 PM
|
#2 |
|
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
My Speer #11 book has the 125 JSP with
Start Unique 5.3 gr +p Unique 5.9 gr |
|
|
|
April 25, 2012, 08:13 AM
|
#3 |
|
Senior Member
Join Date: December 31, 2011
Location: Vermont
Posts: 2,076
|
The 2004 Alliant manual lists 5.3gr Unique as max for the 125gr JSP in .38spcl...
My Hornady 4th manual lists from 4.5gr to 5.0gr Unique... Here's a link to the Alliant 2004 Manual PDF....38 Special is on page 42: http://glarp.atk.com/2004/2004Catalo...ntPowderSM.pdf The site is slow sometimes... |
|
|
|
April 25, 2012, 08:55 AM
|
#4 |
|
Member
Join Date: February 29, 2012
Posts: 21
|
thanks guys!
|
|
|
|
April 28, 2012, 07:31 AM
|
#5 |
|
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
You don’t need to mach load data to a specific bullet manufacture. You can use the same load data for the same bullet weight. The following web sites have load data for the powders you are using and weight of bullets. Start light and work up.
My pet load for 125’s and Titegroup is 4.5 Jacketed (Min=4.3 Max 4.6) and that’s out of an old Branny Fife Colt. Also try some lead, try Penn bullets. They have some 125 TCBB that are extremely accurate. http://www.pennbullets.com/38/38-caliber.html http://data.hodgdon.com/main_menu.asp http://www.alliantpowder.com/reloaders/default.aspx |
|
|
|
April 28, 2012, 11:53 AM
|
#6 |
|
Senior Member
Join Date: July 7, 2000
Location: BLACK HILLS
Posts: 1,322
|
MEASUREMENTS......??? How thick of propellent are you lookijng for, right off hand...??
|
|
|
|
April 30, 2012, 07:02 PM
|
#7 |
|
Senior Member
Join Date: December 14, 2004
Location: Northern Indiana
Posts: 6,117
|
How thick of propellent are you lookijng for, right off hand...??
I think that most of us were intelligent enough to understand what he meant. There’s a famous saying, “If you don’t have something positive to add,,,,,” |
|
|
|
May 3, 2012, 09:29 PM
|
#8 |
|
Senior Member
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,943
|
6.0 grains of Unique or SR 4756 will give you A+ loads.
|
|
|
 |
|
|
