338 lapua

elongatus · July 3, 2010, 01:38 PM

im reloading 338 lapua and want to put in 250 gr nosler accubond, but the book only has data for the 250gr partitions. is the data from the nosler book interchangeable?

ojibweindian · July 3, 2010, 01:52 PM

In a word, no.

Start your development 10% off of whatever the max charge is for the load listed in the manual.

escard · July 8, 2010, 05:20 AM

If you have allready a good load with the 250 Partition there should be no problem to get a safe equivalent with the 250 Accubond while cutting off the charge for the Partition by about 4-5 %.........
Make a try with a non-hot-rod-load to verify.

July 3, 2010, 01:38 PM	#1
elongatus Junior Member Join Date: March 5, 2010 Posts: 11	338 lapua im reloading 338 lapua and want to put in 250 gr nosler accubond, but the book only has data for the 250gr partitions. is the data from the nosler book interchangeable?

July 3, 2010, 01:52 PM	#2
ojibweindian Senior Member Join Date: April 21, 2000 Location: Huntsville, Alabama Posts: 1,199	In a word, no. Start your development 10% off of whatever the max charge is for the load listed in the manual.

July 8, 2010, 05:20 AM	#3
escard Member Join Date: April 20, 2010 Posts: 44	If you have allready a good load with the 250 Partition there should be no problem to get a safe equivalent with the 250 Accubond while cutting off the charge for the Partition by about 4-5 %......... Make a try with a non-hot-rod-load to verify.