die boxes

troy_mclure · June 18, 2010, 02:28 AM

where could i find a couple of rcbs/hornady style die boxes.

ive got a couple of lee die sets in the round container, and some sizing dies id like to put in more space friendly boxes.

SVO · June 18, 2010, 03:52 AM

Well, from RCBS. Used to be about $4.00 for a die box. Redding also sells it's die boxes.

WESHOOT2 · June 18, 2010, 07:21 AM

I have about 50 or so Lyman boxes I keep all my dies in; prefer.

www.grafs.com

Kawabuggy · June 18, 2010, 09:19 AM

Midway USA also sells the Green RCBS die boxes. I think they run just a little over $5.. I bought a couple recently as I like them.

Jim243 · June 18, 2010, 10:46 AM

Just buy the square flat Lee die boxes for 2.30 each from "Factory Sales".

Jim

http://www.factorysales.com/html/xca...g/dies-p7.html

Clone · June 18, 2010, 03:32 PM

I have been looking for some as well. But I need some bigger that the normal boxes. I installed some true lock rings on my lee dies and the lid no longer fits the box properly with these installed. All the ones from the other company's look the same size as the lee boxes.

troy_mclure · June 18, 2010, 07:44 PM

i got rid of my lee flat boxes because with the breach lock's on the dies the box was too narrow, they fit fine in the rcbs/hornady boxes, but the lyman box i have is too skiny.

ill look at midway.

thanks.

mongoose33 · June 19, 2010, 02:40 AM

Grafs sells the Hornady boxes (the red ones) for about $4 per.

I've bought a few of them for the oddball dies that I have with the LnL bushings attached, like the universal decapping die from Lee.

June 18, 2010, 02:28 AM	#1
troy_mclure Senior Member Join Date: November 17, 2008 Location: gulf of mexico Posts: 2,716	die boxes where could i find a couple of rcbs/hornady style die boxes. ive got a couple of lee die sets in the round container, and some sizing dies id like to put in more space friendly boxes.

June 18, 2010, 07:21 AM	#3
WESHOOT2 Senior Member Join Date: February 20, 1999 Location: home on the range; Vermont (Caspian country) Posts: 14,324	slowly diminishing.... I have about 50 or so Lyman boxes I keep all my dies in; prefer. www.grafs.com

June 18, 2010, 03:52 AM	#2
SVO Senior Member Join Date: December 21, 2009 Location: Texas Gulf Coast Posts: 728	Well, from RCBS. Used to be about $4.00 for a die box. Redding also sells it's die boxes.

June 18, 2010, 09:19 AM	#4
Kawabuggy Senior Member Join Date: April 25, 2008 Posts: 224	Midway USA also sells the Green RCBS die boxes. I think they run just a little over $5.. I bought a couple recently as I like them.

June 18, 2010, 10:46 AM	#5
Jim243 Senior Member Join Date: January 6, 2009 Location: Just off Route 66 Posts: 5,067	Just buy the square flat Lee die boxes for 2.30 each from "Factory Sales". Jim http://www.factorysales.com/html/xca...g/dies-p7.html

June 18, 2010, 03:32 PM	#6
Clone Senior Member Join Date: March 16, 2005 Posts: 234	I have been looking for some as well. But I need some bigger that the normal boxes. I installed some true lock rings on my lee dies and the lid no longer fits the box properly with these installed. All the ones from the other company's look the same size as the lee boxes.

June 18, 2010, 07:44 PM	#7
troy_mclure Senior Member Join Date: November 17, 2008 Location: gulf of mexico Posts: 2,716	i got rid of my lee flat boxes because with the breach lock's on the dies the box was too narrow, they fit fine in the rcbs/hornady boxes, but the lyman box i have is too skiny. ill look at midway. thanks.

June 19, 2010, 02:40 AM	#8
mongoose33 Senior Member Join Date: June 23, 2009 Location: Wisconsin Posts: 228	Grafs sells the Hornady boxes (the red ones) for about $4 per. I've bought a few of them for the oddball dies that I have with the LnL bushings attached, like the universal decapping die from Lee.