Crossman 38T

94bluerat · January 12, 2008, 09:12 AM

Hi all,
I have a Crossman 38T, .177 cal CO2 powered revolver. Does anyone have experience or a recommendation on who to contact about this gun?
I shot it about 12 rounds, it seems fairly strong. Around shot 15 the remainder of the co2 evaquated out the front of the frame and barrel.
When trying a new cylinder it imediately dumped the entire cylinder when initially pierced.
I know there has to be a seal that is not re seating to contain the gas, but I has hoping to gain some guidance before I tore into it.
The directions and exploded parts views have been downloaded, it looks straightforward.

Any recomendations on parts or info source for repais?

Thanks!

kb2iaw · January 17, 2008, 09:50 AM

I had a similar problem with my crossman...it seems to fire well for about 6 or seven shots ,then as the propellent diminishes the accuracy falls off...i now use a benjamin pump.

Roundman · October 10, 2008, 10:25 PM

Hey 94Bluecat

I had the same thing happen today with a Model 38 T .177. This was my Dad's gun and this is the first time a CO2 cartridge has been loaded into it in over ten years. I would love to keep the gun working.....were you able to locate any information or source for parts??

Thanks for sharing any information!!

TnShooter83 · October 10, 2008, 10:49 PM

Try these guys.
They do great work, and sale reseal kits along with a lot of parts.
The 38T is a bit hard to reseal yourself.
But can be done.

http://www.bryanandac.com

pelet marksman · February 7, 2009, 09:53 AM

yea i have the model 38t and it hasnt been shot for probley 10 years and when i put in the c02 cartridge it dumps it all out thrue the barrel and pellet clip and i ws wondering if i was using it right or if i need a new part someone let me know thanks

January 12, 2008, 09:12 AM	#1
94bluerat Senior Member Join Date: May 30, 2007 Location: South of Canada Posts: 204	Crossman 38T Hi all, I have a Crossman 38T, .177 cal CO2 powered revolver. Does anyone have experience or a recommendation on who to contact about this gun? I shot it about 12 rounds, it seems fairly strong. Around shot 15 the remainder of the co2 evaquated out the front of the frame and barrel. When trying a new cylinder it imediately dumped the entire cylinder when initially pierced. I know there has to be a seal that is not re seating to contain the gas, but I has hoping to gain some guidance before I tore into it. The directions and exploded parts views have been downloaded, it looks straightforward. Any recomendations on parts or info source for repais? Thanks!

October 10, 2008, 10:25 PM	#3
Roundman Junior Member Join Date: October 10, 2008 Location: Anderson, SC Posts: 1	Same problem Hey 94Bluecat I had the same thing happen today with a Model 38 T .177. This was my Dad's gun and this is the first time a CO2 cartridge has been loaded into it in over ten years. I would love to keep the gun working.....were you able to locate any information or source for parts?? Thanks for sharing any information!!

January 17, 2008, 09:50 AM	#2
kb2iaw Senior Member Join Date: October 2, 2006 Location: Oneonta (city of the hills) Posts: 104	I had a similar problem with my crossman...it seems to fire well for about 6 or seven shots ,then as the propellent diminishes the accuracy falls off...i now use a benjamin pump.

October 10, 2008, 10:49 PM	#4
TnShooter83 Junior Member Join Date: October 10, 2008 Posts: 6	Try these guys. They do great work, and sale reseal kits along with a lot of parts. The 38T is a bit hard to reseal yourself. But can be done. http://www.bryanandac.com

February 7, 2009, 09:53 AM	#5
pelet marksman Junior Member Join Date: February 7, 2009 Posts: 1	yea i have the model 38t and it hasnt been shot for probley 10 years and when i put in the c02 cartridge it dumps it all out thrue the barrel and pellet clip and i ws wondering if i was using it right or if i need a new part someone let me know thanks