Cylinder Spacing

Mantua · July 17, 2007, 12:31 AM

Heh, found out what was wrong.

**Unclenick** · July 17, 2007, 12:27 PM

It would be immensely convenient if you made mention of the subject matter (i.e, what the resolved problem was)? If this was in regard to another thread originally, make your post a reply in that thread, and the thread will come back to the head of the list, providing context for your comment.

Mantua · July 18, 2007, 02:45 AM

I had thought i reassembled my Taurus 85 wrong, but it turns out i just have no idea what i'm talking about

I thought i had managed to reassemble it with the cylinder too close to the frame, and that it was causing the cylinder to be hard to close. Turns out i had just over tightened everything.

July 17, 2007, 12:31 AM	#1
Mantua Member Join Date: June 4, 2007 Location: Central Florida Posts: 70	Cylinder Spacing Heh, found out what was wrong. Last edited by Mantua; July 17, 2007 at 01:33 AM. Reason: Uh, duh, I put it on screwed it on too tight

July 17, 2007, 12:27 PM	#2
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,733	A favor, please. It would be immensely convenient if you made mention of the subject matter (i.e, what the resolved problem was)? If this was in regard to another thread originally, make your post a reply in that thread, and the thread will come back to the head of the list, providing context for your comment. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle

July 18, 2007, 02:45 AM	#3
Mantua Member Join Date: June 4, 2007 Location: Central Florida Posts: 70	I had thought i reassembled my Taurus 85 wrong, but it turns out i just have no idea what i'm talking about I thought i had managed to reassemble it with the cylinder too close to the frame, and that it was causing the cylinder to be hard to close. Turns out i had just over tightened everything.