Rem 1100

Deans · September 12, 1999, 12:08 PM

Need some help. Read somewhere the 1100 needs
to be cleaning reqular for proper operation.
My son's is not cycling correctly and I
supect the gas ports need cleaning. Where can
I get the cleaning procedures to send to my
son?

Thanks in advance. Deans

James K · September 12, 1999, 05:18 PM

There have been magazine articles, but the best bet is to write to Remington. They have an owners' manual.

Jim

motorep · September 12, 1999, 07:08 PM

Deans- take the barrel off, the gas ports are directly underneath the sleeve that goes over the mag tube. They angle back, you can clean them with a small pipe cleaner, or Brownells has a brush specific to this task.

September 12, 1999, 12:08 PM	#1
Deans Junior Member Join Date: September 7, 1999 Posts: 13	Need some help. Read somewhere the 1100 needs to be cleaning reqular for proper operation. My son's is not cycling correctly and I supect the gas ports need cleaning. Where can I get the cleaning procedures to send to my son? Thanks in advance. Deans

September 12, 1999, 05:18 PM	#2
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	There have been magazine articles, but the best bet is to write to Remington. They have an owners' manual. Jim

September 12, 1999, 07:08 PM	#3
motorep Senior Member Join Date: October 29, 1998 Location: mid-coast Maine Posts: 546	Deans- take the barrel off, the gas ports are directly underneath the sleeve that goes over the mag tube. They angle back, you can clean them with a small pipe cleaner, or Brownells has a brush specific to this task.