Loading Brass Shotgun Shells

MPP1423 · November 15, 2005, 12:15 AM

Can Anyone Tell Me How To Load The Brass Shotgun Shells?what Kind Of Loader Is Used?

Cap n ball · November 15, 2005, 08:53 AM

You might find that info here. http://huntingsociety.org/reloaders.html

Quantrill · November 15, 2005, 09:35 AM

I have done it, but not recently. I believe I have 2 boxes of 25 loaded and ready for firing. The brass is Brass Extrusion Labratory Limited (B.E.L.L.). It takes a Large rifle primer. I loaded them with some hand made tools, a 12 guage Lee (Hand) Loader and some help from a M.E.C. 650. I used 700X powder, #8 shot and 10 ga plastic wads ( that's right, 10 ga.). I sealed the top with some old paper cardboard wads glued in with a large amount on Elmer's Glue (which actually hardens and holds the whole thing together). It was a long, tedious process (for me at least) and I do not think I will do it again. Quantrill

MPP1423 · November 15, 2005, 03:53 PM

thanks guys.i just thought it would be cool to have some and so i thought about loading up some.

Old Dragoon · November 15, 2005, 04:09 PM

Look on Ebay and the gun auction sites for shotshell loading press under reloading. I have seen some availablle on these sites. You need at a few for your belt just to show off when you do the CAS thing.

MPP1423 · November 15, 2005, 04:13 PM

dragoon,thats exactly what i was thinking,lol.

November 15, 2005, 12:15 AM	#1
MPP1423 Senior Member Join Date: September 10, 2005 Location: GOODLETTSVILLE,TN Posts: 298	Loading Brass Shotgun Shells Can Anyone Tell Me How To Load The Brass Shotgun Shells?what Kind Of Loader Is Used?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

November 15, 2005, 08:53 AM	#2
Cap n ball Senior Member Join Date: October 17, 2000 Posts: 247	You might find that info here. http://huntingsociety.org/reloaders.html

November 15, 2005, 09:35 AM	#3
Quantrill Senior Member Join Date: February 28, 1999 Location: Arizona, USA Posts: 725	I have done it, but not recently. I believe I have 2 boxes of 25 loaded and ready for firing. The brass is Brass Extrusion Labratory Limited (B.E.L.L.). It takes a Large rifle primer. I loaded them with some hand made tools, a 12 guage Lee (Hand) Loader and some help from a M.E.C. 650. I used 700X powder, #8 shot and 10 ga plastic wads ( that's right, 10 ga.). I sealed the top with some old paper cardboard wads glued in with a large amount on Elmer's Glue (which actually hardens and holds the whole thing together). It was a long, tedious process (for me at least) and I do not think I will do it again. Quantrill

November 15, 2005, 03:53 PM	#4
MPP1423 Senior Member Join Date: September 10, 2005 Location: GOODLETTSVILLE,TN Posts: 298	thanks guys.i just thought it would be cool to have some and so i thought about loading up some.

November 15, 2005, 04:09 PM	#5
Old Dragoon Senior Member Join Date: October 31, 2005 Location: The Republic of Californi Posts: 581	Look on Ebay and the gun auction sites for shotshell loading press under reloading. I have seen some availablle on these sites. You need at a few for your belt just to show off when you do the CAS thing.

November 15, 2005, 04:13 PM	#6
MPP1423 Senior Member Join Date: September 10, 2005 Location: GOODLETTSVILLE,TN Posts: 298	dragoon,thats exactly what i was thinking,lol.