Beginner Help - Lee Autodisk - Page 2

**Mike Irwin** · June 18, 2014, 11:55 AM

Lee Precision Item Number 90302, the Lee Micro Disk.

Measures from 1.1 to 2.5 grains of Bullseye.

Well crap... It looks like it may be out of production.

max it · June 18, 2014, 12:03 PM

hi ya, everything I know I learned on youtube.com
beam scale,
measure after dropping charge; measure the powder dropped by putting in scale.
I measure one or two when it is right, and then again after 10 and after that every 100 or so.
however I have packed up my Lee pro 1000 and only use my Dillon RL450 and RL550's. occasionally using a RCBS Jr. single stage.

reply if you don't get it.

watch for double loads in case before setting bullet.

Brian Pfleuger · June 18, 2014, 12:12 PM

Quote:

Lee Precision Item Number 90302, the Lee Micro Disk.

THAT'S what it's called. I Googled several different terms trying to find single and/or smaller disks but all turned up empty. I thought I had a vague recollection of some such thing. It does seem to be out of production, MidWay lists it as discontinued.

dickttx · June 18, 2014, 02:25 PM

Someone is making and selling a new one on ebay for about $20.

ddc · June 19, 2014, 01:07 PM

Quote:

Someone is making and selling a new one on ebay for about $20.

http://www.ebay.com/itm/CUSTOM-CAST-...item4d1f56fda9

also:

http://www.ebay.com/itm/CUSTOM-CAST-...item4d1f4248be

June 18, 2014, 11:55 AM	#26
Mike Irwin Staff Join Date: April 14, 2000 Location: Northern Virginia Posts: 41,642	Lee Precision Item Number 90302, the Lee Micro Disk. Measures from 1.1 to 2.5 grains of Bullseye. Well crap... It looks like it may be out of production. __________________ "The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower.

June 18, 2014, 12:03 PM	#27
max it Senior Member Join Date: June 15, 2008 Location: near Disneyland Posts: 283	hi ya, everything I know I learned on youtube.com beam scale, measure after dropping charge; measure the powder dropped by putting in scale. I measure one or two when it is right, and then again after 10 and after that every 100 or so. however I have packed up my Lee pro 1000 and only use my Dillon RL450 and RL550's. occasionally using a RCBS Jr. single stage. reply if you don't get it. watch for double loads in case before setting bullet.

June 18, 2014, 02:25 PM	#29
dickttx Senior Member Join Date: May 29, 2011 Location: Fort Worth Posts: 500	Someone is making and selling a new one on ebay for about $20.