|
February 24, 2010, 06:29 PM
|
#1 |
|
Junior Member
Join Date: February 24, 2010
Posts: 1
|
270 wsm loads?
Just purchased a 1885 Winchester 270 WSM. Dies are ordered, brass already in, interested in loads that have worked well.
|
|
|
February 25, 2010, 11:07 PM
|
#2 |
|
Senior Member
Join Date: March 26, 2006
Location: Minnesota
Posts: 212
|
I use 59.5gr h414 with 130gr nosler solid base bullets win lrm primers. They seem to be pretty accurate for me. Once I am out of 414 I am thinking about trying some rl22. this is all for my tikka t3
|
|
|
|
February 26, 2010, 09:04 AM
|
#3 |
|
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,968
|
I little heads up. The WSM cases are tuff and can be a little difficult to size. When setting up your FL dies make sure you check to see if your sized brass will chamber before you load any. Depending on the dies, chamber, etc, it make take a hard camover to get the proper shoulder bump.
|
|
|
|
February 27, 2010, 11:34 AM
|
#4 |
|
Senior Member
Join Date: January 3, 2008
Location: Central Oregon
Posts: 348
|
For my partners Model 70 it LOVES 71.5 gr of Retumbo behind a 140 gr Nosler Accubond , WLRM primer holding 1 1/4 in. 200 yd. groups at appx 3,175 fps.
|
|
|
 |
|
|
