xd 45 load

old45reloader · March 30, 2007, 10:34 PM

looking for a load for xd 45

ECLIPSE45ACP · April 2, 2007, 11:43 AM

I would reccomend getting a reloading manual.

XD-Guy · April 4, 2007, 07:13 AM

I shoot lead in my .45XD. Want some of my recipes?

rwilson452 · April 4, 2007, 09:01 AM

I shoot lead in my .45XD. Want some of my recipes?

Yes, I'm alway in for more recipes.

45auto45 · April 7, 2007, 04:52 AM

Just did some for my XD. 200 Gr JFP with 4.8 Gr. BullsEye. Pretty smooth. Slower, but smooth!!

mattgreennra · April 23, 2007, 02:42 AM

buy hornady #7 for like $25.
I use my "standard" plinking/target load in my XD .45 compact model. Winchester 230 RN FMJ and 4.4 grains of Titegroup w/ CCI large pistol primers. Gets the job done.

WESHOOT2 · April 23, 2007, 05:39 AM

Sized case (I prefer IMI), CCI300, 230g LRN/FMJ/TCJ-RN (pick one; I prefer 230g LRN), OAL 1.240--1.265" (based on specific gun -- I use and suggest an OAL of 1.260" +/-.005" to start), crimp to .469--.471", 5.0g W231.

MY personal ain't-huntin'-nor-shootin'-people load: sized case, CCI300, 230g LRN, 5.0g W231, OAL 1.260".
Av = 737fps

45auto45 · April 24, 2007, 03:35 AM

230 gr is just rude! I am now switching to a 200 gr bullet and selling off all my 230 gr. bullets, some WW FMJ and about 1250 rds. of lead hard cast. Sad part is, I have cases of brand new ball, WW, UMC I'm considering unloading.

March 30, 2007, 10:34 PM	#1
old45reloader Junior Member Join Date: September 19, 2006 Location: pacific,wa Posts: 9	xd 45 load looking for a load for xd 45

April 4, 2007, 09:01 AM	#4
rwilson452 Senior Member Join Date: June 10, 2004 Location: Tioga co. PA Posts: 2,647	recipes I shoot lead in my .45XD. Want some of my recipes? Yes, I'm alway in for more recipes.

April 2, 2007, 11:43 AM	#2
ECLIPSE45ACP Senior Member Join Date: January 9, 2007 Location: Omaha, NE Posts: 177	I would reccomend getting a reloading manual.

April 4, 2007, 07:13 AM	#3
XD-Guy Senior Member Join Date: November 20, 2006 Posts: 102	I shoot lead in my .45XD. Want some of my recipes?

April 7, 2007, 04:52 AM	#5
45auto45 Member Join Date: April 1, 2007 Location: Girly Man!!!! Posts: 38	Just did some for my XD. 200 Gr JFP with 4.8 Gr. BullsEye. Pretty smooth. Slower, but smooth!!

April 23, 2007, 02:42 AM	#6
mattgreennra Member Join Date: April 15, 2007 Location: Columbus, Ohio Posts: 93	buy hornady #7 for like $25. I use my "standard" plinking/target load in my XD .45 compact model. Winchester 230 RN FMJ and 4.4 grains of Titegroup w/ CCI large pistol primers. Gets the job done.

April 23, 2007, 05:39 AM	#7
WESHOOT2 Senior Member Join Date: February 20, 1999 Location: home on the range; Vermont (Caspian country) Posts: 14,324	starting out; tested 100,000,000 times..... Sized case (I prefer IMI), CCI300, 230g LRN/FMJ/TCJ-RN (pick one; I prefer 230g LRN), OAL 1.240--1.265" (based on specific gun -- I use and suggest an OAL of 1.260" +/-.005" to start), crimp to .469--.471", 5.0g W231. MY personal ain't-huntin'-nor-shootin'-people load: sized case, CCI300, 230g LRN, 5.0g W231, OAL 1.260". Av = 737fps

April 24, 2007, 03:35 AM	#8
45auto45 Member Join Date: April 1, 2007 Location: Girly Man!!!! Posts: 38	230 gr is just rude! I am now switching to a 200 gr bullet and selling off all my 230 gr. bullets, some WW FMJ and about 1250 rds. of lead hard cast. Sad part is, I have cases of brand new ball, WW, UMC I'm considering unloading.