|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
January 6, 2016, 01:54 PM | #1 |
Member
Join Date: June 28, 2014
Posts: 32
|
124gr Hornady XTP bullets - 9mm & Hodgdon Longshot powder
Does anyone have a Hornady reloading manual? I'm looking for load recipe for using a 124gr Hornady XTP bullets - 9mm and Hodgdon Longshot powder. I really don't want to get into another powder that I don't have, because I have LOTS of the powders above.
Also need a COL. |
January 6, 2016, 02:09 PM | #2 |
Senior Member
Join Date: March 2, 2014
Posts: 11,806
|
9mm is a bit small for a slow-burner like Longshot I believe--but I'm no expert--I think you can find a few "use at your own risk" recipes out there if ya google for it.
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! |
January 6, 2016, 03:02 PM | #3 |
Senior Member
Join Date: March 8, 2013
Location: Rittman, Ohio
Posts: 2,074
|
The Hodgdon website lists a handful of 125gr and a 124gr bullet but not the XTP.
|
January 6, 2016, 03:46 PM | #4 |
Junior Member
Join Date: January 5, 2016
Posts: 7
|
I have the newest hornady manual, but if memory serves correct, they dont have Longshot in the powder listings. I would try hodgdons reloading center on their website
|
January 7, 2016, 11:54 PM | #5 |
Junior Member
Join Date: September 25, 2012
Posts: 1
|
Hodgdon does not include data for the 124gr xtp if i remember correctly but you can use the data from another bullet that they list or you can examine the data they list for the 147gr xtp and use the difference in bullet length to calculate a load range which gives the same case fill percentage.
The data given for a 125 fmj is 4.7-5.7gr at 1.09" oal. This gives a little over 90 percent case fill. The data for the 147gr xtp is 3.8-4.7gr at 1.100" oal which results in about 95% case fill. Based on these numbers a 90 percent fill cahrge for a 124gr xtp at 1.100" oal is about 5.8gr. So just use the fmj data, starting low and going slow. Last edited by ewlyon; January 8, 2016 at 12:22 AM. |
|
|