|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 27, 2016, 10:52 AM | #1 |
Junior Member
Join Date: July 26, 2016
Posts: 2
|
.45 Colt Brass Life in Rifle
Hi All,
New to the forum, glad to be here. I reload quite a bit of .45 colt (Ruger Blackhawk). Most loads are in the standard range (8-9 grains Unique and 250 XTP's or Lasercast). I'm thinking of getting a .45 colt lever action (Winchester, Marlin, or Henry). My questions are: Does shooting pistol brass through a rifle decrease the life of the brass more than shooting it through a pistol or will the brass last just as long? Are there any other consideration in this situation? Thank you |
July 27, 2016, 11:33 AM | #2 |
Senior Member
Join Date: July 6, 2000
Location: BLACK HILLS
Posts: 1,322
|
THIS depends entirely upon the dimensions of the chamber in THAT particular rifle. It also depends somewhat upon your ability to handload correctly for that firearm. MANY 45COLT leverguns have chambers you can throw a cat through.
And so it goes.... |
July 27, 2016, 12:07 PM | #3 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
"...Does shooting pistol brass through a rifle decrease the life of the brass..." Nope. Case life depends entirely on the load used out of any firearm. 8-9 grains of Unique is close to max for a cast bullet out of a revolver though.
Aside from it being unlikely, but possible, that your Blackhawk load will shot well out of a rifle, I very much doubt shooting it out of a rifle will make any difference at all. Wouldn't worry about case life myself. .45 Colt brass isn't hard to come by nor particularly expensive.
__________________
Spelling and grammar count! |
July 27, 2016, 04:55 PM | #4 |
Senior Member
Join Date: December 30, 2006
Location: midwest
Posts: 1,105
|
wil nailed it, loose chambers galore,,,,,bob
|
July 28, 2016, 12:21 AM | #5 |
Senior Member
Join Date: January 7, 2008
Posts: 3,224
|
Having both a Ruger Vaquero with very close chambers, and a Marlin Cowboy, also in 45 Colt, but with larger chamber dimensions, I absolutely concur with WIL TERRY on this one. Ammo fired from the Vaquero show no bulging whatsoever. The same ammo fired in my Marlin are remarkably bulged. although the bulged brass resizes and reloads OK, I am certain it is affecting case life.
|
July 29, 2016, 06:53 AM | #6 | |
Senior Member
Join Date: March 8, 2013
Location: Rittman, Ohio
Posts: 2,074
|
Quote:
Considering that the brass stretches to the dimensions of the chamber when fired, it makes perfect sense that the more oversize the chamber, the more your brass will stretch, and the shorter its working life. |
|
July 29, 2016, 08:48 AM | #7 |
Senior Member
Join Date: May 4, 2010
Posts: 5,468
|
Would he be better off to segregate brass? Not necessarily religiously, run them together as needed, but marking them for r and p, and keeping them separate most of the time?
I don't segregate my .357.
__________________
None. |
July 29, 2016, 09:26 AM | #8 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Another consideration is the possible differences in the overall length of the reloads needed for revolver and rifle.
It's not always about the chamber dimensions, but the feeding from the tube magazine for the rifle. It that proves to be a requirement, then the ammo might have to be different and separate for each, too, if a happy version can't be found for both. Just a thought.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
July 31, 2016, 09:57 AM | #9 |
Junior Member
Join Date: July 26, 2016
Posts: 2
|
Thank you all for the replies - you gave me some good info.
|
|
|