July 8, 2008, 09:20 AM | #1 |
Senior Member
Join Date: March 2, 2000
Location: Houston, Texas
Posts: 263
|
Hi-Power question
Hi, I tore my FEG Hi-Power down this weekend for the first time after getting it last week. After I put it all back together, the bar that lifts up when pulling the trigger keeps falling out and it lays into the mag well. It is still attached at the base it just lays back and sticks out. Did a spring or some kind of keeper fall out? I looked up parts diagrams and nothing appears to be missing. What is going on? Sorry for the terrible pic.
Thanks |
July 9, 2008, 03:29 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
If you have the parts diagrams, try giving us some part name other than "the bar that lifts up." It sort of sounds like the ejector is falling forward, which it will do if the sear pin is not through it to hold it, but the pic is so bad I can't even tell it is of a gun, let alone which part that is.
Jim |
July 11, 2008, 08:43 AM | #3 |
Member
Join Date: May 19, 2004
Posts: 76
|
Do you have the tail of the trigger return spring in the notch of the trigger lever?
I think not. |
|
|