January 10, 2010, 11:16 PM | #1 |
Junior Member
Join Date: January 10, 2010
Posts: 1
|
a silence question
I was wondering if their was any way I can silence a .270 or a .243? I am wanting a high powered rifle silenced. If you have any information please fill me in. I am looking for a homemade one or anything thank you.
|
January 10, 2010, 11:21 PM | #2 |
Senior Member
Join Date: September 5, 2004
Location: Western Slope, Colorado
Posts: 403
|
Check out the NFA section of this board about the hoops to jump through to get a silencer/suppressor/muffler/moderator or whatever the heck they're called.
If this is for hunting double check your regulations. Some locals don't allow a suppressed gun for hunting. Last edited by kkb; January 10, 2010 at 11:27 PM. |
January 10, 2010, 11:56 PM | #3 |
Senior Member
Join Date: October 23, 2005
Location: US
Posts: 3,657
|
Yeah, supressing a hi power centerfire rifle is an excercise in futility. What it's best for is to make range time a tad easier on the ears, not many other practical applications IMHO. A .22lr on the other hand...
|
January 11, 2010, 08:38 AM | #4 | |
Senior Member
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,333
|
Quote:
Please quit repeating this myth. Suppressing a high power centerfire rifle is most certainly worth it. You cut down the muzzle blast to a level that is most often hearing safe. (Under 140 db) All you are left with is the sonic crack and that isn't that loud.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me. |
|
January 11, 2010, 09:00 AM | #5 |
Senior Member
Join Date: September 9, 2006
Posts: 424
|
Reason for Suppression
First it's suppression, not silencing. The reason we suppress High Power weapons in the military is detection. I urge anyone, who gets a chance, to "work the butts" with someone firing a suppressed weapon. The supersonic crack is right over your head and you have no idea where the report came from. Even if you are down range and perpendicular to the bullet path you will be hard pressed to find the source of the report. Yes, even a 338 Lapua. I keep a can (suppressor) on my m4 all the time, besides I like the balance better. I have a can on my Cheytac M-200 Intervention in 338 Lapua. The people on the range around me prefer it. Yes, you still have noise reduction, but, it's certainly not Hollywood, but close to the 338 Lapua you'll want a set of attenuators!! OH, a can also changes gas dynamics on short barreled gas operated weapons.
|
January 11, 2010, 02:06 PM | #6 | |
Senior Member
Join Date: April 22, 2007
Location: Las Vegas
Posts: 224
|
Quote:
Ask over on SilencerTalk.com. Someone there can point you to something that will work for you. |
|
January 11, 2010, 04:10 PM | #7 |
Senior Member
Join Date: September 9, 2006
Posts: 424
|
Gemtech
These are the only suppressors I use. They are superb. The link is to the AWC Thundertrap. I think you'll everything but 270.
http://www.awcsystech.com/products/s...s/thundertrap/ Last edited by 1911rocks; January 11, 2010 at 08:53 PM. |
January 11, 2010, 08:14 PM | #8 | |
Junior member
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
|
Quote:
Try standing next to two shooters without hearing protection, one suppressed and one unsuppressed. This should make a believer out of anyone as to how effective they really are. Since the sonic wave of the supersonic bullet doesn't pass the shooter's ear when shot out in the open, the muzzle blast is by far the greatest noise component. Ranb Last edited by RAnb; January 11, 2010 at 08:27 PM. |
|
January 11, 2010, 08:22 PM | #9 | |
Junior member
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
|
Quote:
Making or buying a silencer both require routine ATF authorization and a one time $200 tax. It is unlikely that any hobbyist like myself would be willing to make you one for liability reasons. Also if you live in different state from the unlicensed maker, then are two $200 taxes to be paid to get it to you and that makes a homemade silencer not worth it. Feel free to PM me. Ranb |
|
January 12, 2010, 03:28 PM | #10 |
Senior Member
Join Date: April 22, 2007
Location: Las Vegas
Posts: 224
|
Ranb.
Seems you and I are on a quest lately concerning education on suppressor legality and use. |
January 13, 2010, 04:17 AM | #11 |
Junior member
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
|
Yes, I have been for the last several years. Thanks for the help. WA state bans use and I have been trying to educate as many residents and law makers as I can. It is an uphill battle as all kinds of people tend to resist to admit that silencers are useful or even legal. They sometimes persist in this even after they read my posts about the legalities and how they work.
Lately I have grown tired of being nice to those who decide that I am a criminal because one of my hobbies is making silencers. They anger me of even more when they think an apology is enough instead of explaining why they made the accusation in the first place. Ranb |
January 13, 2010, 10:08 AM | #12 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
RAnb, the suppressors on those AR15s appear to have a pretty big hole in the can. Are those higher caliber suppressors mounted on an AR or did you manufacture them that way to give yourself some "oops" room?
|
January 14, 2010, 07:33 PM | #13 | |
Senior Member
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,333
|
Quote:
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me. |
|
January 14, 2010, 07:43 PM | #14 |
Junior member
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
|
The first AR photo is a 458 socom, the silencer bore is about .520" to ensure no baffle strikes. The second AR photo is a 5.56 NM. The end cap is cone shaped like a baffle. Sideways it would look like the letter M. The bore is about .28" and the end cap opens up to about .65" on the outside to reduce weight. I care more about accuracy than suppression, so I give myself some more "oops" room than some others think is required.
Ranb |
January 14, 2010, 10:17 PM | #15 |
Senior Member
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,333
|
K-baffle. M baffle. my bad. I was close.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me. |
January 14, 2010, 11:21 PM | #16 | |
Senior Member
Join Date: March 20, 2008
Posts: 442
|
Quote:
Here's a dramatic demonstration video as proof of how wrong you are. Video link. That is my rifle, my silencer, and my camera with a friend filming. |
|
January 15, 2010, 09:30 AM | #17 | |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
Quote:
??? |
|
January 29, 2010, 10:27 AM | #18 |
Junior Member
Join Date: January 28, 2010
Location: Oklahoma
Posts: 3
|
Everyone can make a comment on whether or not it's worth it, or they work, or even their own design ideas. The best thing that you could do is to look up a SOT2 manufacturer in your area. Yes, there are plenty out there. They will run the specs for you and transfer it to you legally. You're going to be out the price for the can and the $200 tax stamp, but it will keep the "homemade" garbage from biting you in the future. The only way to own a class III item is to own it legally.
|
January 29, 2010, 11:01 AM | #19 |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
I also built one for a 458 socom that I use for hog hunting. I made it so it came back over the barrel to add volume to help out for its lack of length. Here is a video http://s121.photobucket.com/albums/o...urrent=458.flv
|
January 29, 2010, 11:49 AM | #20 |
Senior Member
Join Date: January 23, 2008
Posts: 713
|
I'm very impressed with the workmanship of you guys making your own cans!
I only have one, in 9mm, and it has aluminum baffles. is aluminum sufficient for higher pressure rounds, .223 for example, or do you use stainless for those?
__________________
http://takdriver.com/ |
January 29, 2010, 02:26 PM | #21 |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
For rifle rounds aluminum isn’t the best choice for longevity. Steel is better but the best use other metals that are even more abrasion/heat resistant like Inconel.
Most of my Form 1 suppressors use a Mix of 4130, 4140 chromoly steel and 6061 or 7075 aluminum. |
January 29, 2010, 05:41 PM | #22 |
Junior member
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
|
My first 223 can was 4130 tube end caps and blast baffle. The remaining bafles are all aluminum. My second 223 can is all 4130. The aluminum is holding up ok, but I do not heat it up much.
Ranb |
January 29, 2010, 06:19 PM | #23 |
Senior Member
Join Date: January 23, 2008
Posts: 713
|
thanks gents!
RA- can that over the barrel can be used on a ported barrel?
__________________
http://takdriver.com/ |
January 29, 2010, 07:39 PM | #24 |
Senior Member
Join Date: December 5, 2004
Posts: 1,181
|
Firstly can we stop talking about silencers. Silencers aim to silence a firearm they are large and bulky and are what Hollywood and the media have got politicians all worked up about.
What you want is what is widely used in NZ and the UK- a sound moderator- something that will cut the decibels of a firearm by 30% or so reducing hearing damage to the shooter and annoyance to the public if shooting in settled areas. |
January 29, 2010, 11:49 PM | #25 | |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
Quote:
|
|
|
|