where can i find spare cylinder for uberti 1858 remington?

tiberius10721 · February 3, 2009, 11:50 AM

so far ive found only spare pieta cylinders for my uberti 1858 remington but from what ive researched they dont fit .i wish they did fit because they are only 39 dollars at cabellas. does anybody Know of some similar deal for ubertis 1858 remmy.im very suprised theres not more information on spare cylinders for uberti bp revolvers considering how popular they are.well maybe i just dont know where to look!please help!i love this gun!

kirpi97 · February 3, 2009, 12:04 PM

Here is a site that carries various parts, including the cylinder, for Uberti. From everything I know, the 1858 New Army and the 1858 Revolving Carbine use the same cylinder

http://www.vtigunparts.com/store/sho...volver+Carbine

Price is $100. A bit steep for me, but it is an option.

Raider2000 · February 3, 2009, 12:21 PM

Kirpi is right in that both the Uberti 1858 & the Revolving Carbine use the same cylinder & VTI is usually the best place to find replacement parts but if they don't have what you need give taylors firearms a try too.

noelf2 · February 3, 2009, 01:35 PM

$85 at dixie

http://www.dixiegunworks.com/product...2997a5d07d650c

kirpi97 · February 3, 2009, 05:04 PM

I looked at Dixie first, and it didn't come up as in stock. Guess you just have to have the touch. You are right. It is there for less.

noelf2 · February 3, 2009, 08:11 PM

I have no idea why a uberti cylinder should be that much more expensive than a pietta. I can see 10 bucks more or so, but that's more than double.

Raider2000 · February 3, 2009, 09:40 PM

The thing that is even funnier Noelf2.

Uberti's 1858 cylinders are slightly shorter than a Pietta 1858.
You get more Steel for less money with a Pietta.

Fingers McGee · February 4, 2009, 12:24 AM

Replacement cylinder from Taylor's is only $66.00 for the New Army. But the carbine cylinder is $81.00. Don't know why. Maybe a phone call to them would clarify.

http://www.taylorsfirearms.com/produ...acturer=Uberti

kirpi97 · February 4, 2009, 02:29 AM

You want sticker shock. I went to Taylor's to check on the cost for an extra cylinder for my Pietta 1861 Colt Navy .44 cal. They want $102 / $111.

I can get it locally for $40. I am not sure if theirs is gold plated or what. But I don't need one that bad.

I would think about jumping at that $66 offer if it pans out. Because the rest of the prices are beyond what I thought to be fair.

noelf2 · February 4, 2009, 06:07 AM

Quote:

Uberti's 1858 cylinders are slightly shorter than a Pietta 1858.
You get more Steel for less money with a Pietta.

That's interesting! More steel, longer chamber, more powder, more power!

Quote:

Replacement cylinder from Taylor's is only $66.00 for the New Army. But the carbine cylinder is $81.00. Don't know why. Maybe a phone call to them would clarify.

Also interesting. I've pondered over getting a carbine and planned to get an R&D cylinder for it. The R&D is supposed to fit either the gun or the carbine. Should be the same c&b cylinder. I just might make that call...

Fourbits · February 4, 2009, 06:16 PM

Pretty reasonable price:

http://www.cabelas.com/cabelas/en/te...817&hasJS=true

Wow, that's quite an address. If it doesn't work just look in hunting, black powder, pistols.

Raider2000 · February 4, 2009, 06:25 PM

Fourbits:

That is for a Pietta not a Uberti, & unfortunatly it will not fit.

odenjs · February 8, 2009, 10:13 PM

Hi, I have a Uberti 1858 carbine and love it. I found a 45 long colt cylinder for it on Gunbroker.com. They have ALL sorts of guns, ammo and parts for just about anything you need.
Hope this helps anyone.

February 3, 2009, 11:50 AM	#1
tiberius10721 Junior member Join Date: December 22, 2008 Posts: 228	where can i find spare cylinder for uberti 1858 remington? so far ive found only spare pieta cylinders for my uberti 1858 remington but from what ive researched they dont fit .i wish they did fit because they are only 39 dollars at cabellas. does anybody Know of some similar deal for ubertis 1858 remmy.im very suprised theres not more information on spare cylinders for uberti bp revolvers considering how popular they are.well maybe i just dont know where to look!please help!i love this gun!

February 3, 2009, 12:04 PM	#2
kirpi97 Senior Member Join Date: November 20, 2008 Location: Oregon Posts: 236	Here is a site that carries various parts, including the cylinder, for Uberti. From everything I know, the 1858 New Army and the 1858 Revolving Carbine use the same cylinder http://www.vtigunparts.com/store/sho...volver+Carbine Price is $100. A bit steep for me, but it is an option. __________________ The parting shot... "Those who hammer their guns into plows, will plow for those who do not." Thomas Jefferson Last edited by kirpi97; February 3, 2009 at 12:29 PM.

February 3, 2009, 01:35 PM	#4
noelf2 Senior Member Join Date: April 14, 2008 Location: Stafford, VA Posts: 2,422	$85 at dixie http://www.dixiegunworks.com/product...2997a5d07d650c __________________ Liberty and freedom often offends those who understand neither.

February 3, 2009, 05:04 PM	#5
kirpi97 Senior Member Join Date: November 20, 2008 Location: Oregon Posts: 236	I looked at Dixie first, and it didn't come up as in stock. Guess you just have to have the touch. You are right. It is there for less. __________________ The parting shot... "Those who hammer their guns into plows, will plow for those who do not." Thomas Jefferson

February 3, 2009, 08:11 PM	#6
noelf2 Senior Member Join Date: April 14, 2008 Location: Stafford, VA Posts: 2,422	I have no idea why a uberti cylinder should be that much more expensive than a pietta. I can see 10 bucks more or so, but that's more than double. __________________ Liberty and freedom often offends those who understand neither.

February 3, 2009, 12:21 PM	#3
Raider2000 Senior Member Join Date: July 23, 2007 Location: Virginia Posts: 719	Kirpi is right in that both the Uberti 1858 & the Revolving Carbine use the same cylinder & VTI is usually the best place to find replacement parts but if they don't have what you need give taylors firearms a try too.

February 3, 2009, 09:40 PM	#7
Raider2000 Senior Member Join Date: July 23, 2007 Location: Virginia Posts: 719	The thing that is even funnier Noelf2. Uberti's 1858 cylinders are slightly shorter than a Pietta 1858. You get more Steel for less money with a Pietta.

February 4, 2009, 12:24 AM	#8
Fingers McGee Senior Member Join Date: March 19, 2008 Location: High & Dry in Missouri Ozarks Posts: 2,111	Replacement cylinder from Taylor's is only $66.00 for the New Army. But the carbine cylinder is $81.00. Don't know why. Maybe a phone call to them would clarify. http://www.taylorsfirearms.com/produ...acturer=Uberti __________________ Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce

February 4, 2009, 02:29 AM	#9
kirpi97 Senior Member Join Date: November 20, 2008 Location: Oregon Posts: 236	You want sticker shock. I went to Taylor's to check on the cost for an extra cylinder for my Pietta 1861 Colt Navy .44 cal. They want $102 / $111. I can get it locally for $40. I am not sure if theirs is gold plated or what. But I don't need one that bad. I would think about jumping at that $66 offer if it pans out. Because the rest of the prices are beyond what I thought to be fair. __________________ The parting shot... "Those who hammer their guns into plows, will plow for those who do not." Thomas Jefferson

February 4, 2009, 06:16 PM	#11
Fourbits Junior Member Join Date: February 29, 2008 Location: Albuquerque, NM USA Posts: 9	Try Cabela's Pretty reasonable price: http://www.cabelas.com/cabelas/en/te...817&hasJS=true Wow, that's quite an address. If it doesn't work just look in hunting, black powder, pistols.

February 4, 2009, 06:25 PM	#12
Raider2000 Senior Member Join Date: July 23, 2007 Location: Virginia Posts: 719	Fourbits: That is for a Pietta not a Uberti, & unfortunatly it will not fit.

February 8, 2009, 10:13 PM	#13
odenjs Junior Member Join Date: February 8, 2009 Posts: 1	Uberti 1858 Carbine & 45LC Cylinder Hi, I have a Uberti 1858 carbine and love it. I found a 45 long colt cylinder for it on Gunbroker.com. They have ALL sorts of guns, ammo and parts for just about anything you need. Hope this helps anyone.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search