The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old March 10, 2009, 07:14 PM   #1176
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Curtmac: Maybe around $200, is should be a nickel finish, not stainless. Check out http://www.armchairgunshow.com/ for recent sales and guns for sale from that era.
Radagast is offline  
Old March 10, 2009, 08:24 PM   #1177
oscardeuce
Junior Member
 
Join Date: March 10, 2009
Posts: 2
I have another please

S+W 38special ctg SN S V 778xxx
US Property GHD

It fires 38 special ammo I asssume.

Recently inherited

Thanks

o2
oscardeuce is offline  
Old March 10, 2009, 09:00 PM   #1178
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
oscardeuce: You have a S&W Victory model revolver made between September 1944 and 1945, mainly for military contracts. The V in the serial number stands for Victory, the S stands fro Safety, after a fatality on a USN ship when an early Victory model was dropped and discharged, an internal hammer block safety was introduced, guns with this modification are marked with an SV prefix.

The correct ammunition for your gun is standard velocity .38 special ammunition. S&W recommends against using PlusP (higher pressure) ammunition in revolvers made before 1958.
Radagast is offline  
Old March 10, 2009, 09:17 PM   #1179
bald1
Senior Member
 
Join Date: October 9, 1998
Location: Black Hills of S. Dakota
Posts: 372
L Frame

I too would very much appreciate identification of the year of manufacture. It's my only S&W and was said to have been a senior police officer's weapon. It appeared to have been used only for qualifications when I bought it over a decade ago. Very clean without any substantive wear marks of any kind.

Anyhow it is a M681-1 S/N AYB3XXX.

Thanks!

--Bob
bald1 is offline  
Old March 10, 2009, 11:07 PM   #1180
JDAZE
Junior Member
 
Join Date: March 10, 2009
Posts: 2
I got one 218XXX

My Dad gave me his old .38 S&W CTG. I too I'm too cheap to buy the book.. Can someone look it up for me?

.38 S&W CTG #218XXX



Looks just like this one but, with a nickle (spelling) finish.

Thanks so much,

Joey
JDAZE is offline  
Old March 11, 2009, 12:21 AM   #1181
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Anyhow it is a M681-1 S/N AYB3XXX.
1987.

Quote:
My Dad gave me his old .38 S&W CTG. I too I'm too cheap to buy the book.. Can someone look it up for me?

.38 S&W CTG #218XXX
.38 Safty Hammerless 4th Model. Serial numbers ran from 116003 in 1898 to 220000 in 1907.

Jim
laytonj1 is offline  
Old March 11, 2009, 01:55 AM   #1182
JDAZE
Junior Member
 
Join Date: March 10, 2009
Posts: 2
".38 Safty Hammerless 4th Model. Serial numbers ran from 116003 in 1898 to 220000 in 1907.

Jim"


Jim, Thanks so much!

Joey
JDAZE is offline  
Old March 11, 2009, 07:02 AM   #1183
bald1
Senior Member
 
Join Date: October 9, 1998
Location: Black Hills of S. Dakota
Posts: 372
Quote:
Quote:
Anyhow it is a M681-1 S/N AYB3XXX.


1987.

Jim,

Thanks! I appreciate it!!!!

--Bob
bald1 is offline  
Old March 11, 2009, 08:20 AM   #1184
oscardeuce
Junior Member
 
Join Date: March 10, 2009
Posts: 2
Thanks for the help
oscardeuce is offline  
Old March 11, 2009, 08:56 AM   #1185
gurn
Junior Member
 
Join Date: March 10, 2009
Posts: 7
Need Help ID revolver

The barrell has several stamps on the underside. .38 Caliber, 1-150, 4 tons per [] ", crown BNP. Thanks

--------------------------------------------------------------------------------

I was given a S&W revolver six shot that is in pretty good shape. I can't find a model number anywhere on it. It's got a short barrell and has a crown and BNP stamped on it. The serial number is 8393XX. Any help would be appreciated. Thanks
gurn is offline  
Old March 11, 2009, 02:53 PM   #1186
delkcerf
Junior Member
 
Join Date: March 11, 2009
Posts: 1
Can anyone tell me the approximate age of a S&W 32 long cartridge, serial number 578682?
delkcerf is offline  
Old March 11, 2009, 06:43 PM   #1187
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Gurn: Those are British proof marks. What you have may be a .38 S&W British Service revolver (WWII made on the K frame, concurrent with the Victory model) that later has the chambers bored through to allow .38 special to be chambered. If the there is a slight taper to the rear of the chambers then this is possibly the case. If so stick to standard pressure loads as there is a chance that that higher pressure ammunition will split the cases.
Radagast is offline  
Old March 11, 2009, 06:50 PM   #1188
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
delkcerf: Assuming you have a swing out cylinder gun, the it is a Regulation Police (Model 31 after 1957) or a .32 Hand Ejector (Model 30 after 1957). Built on the I frame, it was a six shot .32 long revolver with fixed sights, built in the serial number range 536000 to 712953 between 1946 & 1960. Serial number 640980 is recorded in 1956, so your gun predates that.
Radagast is offline  
Old March 11, 2009, 10:26 PM   #1189
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Quote:
Gurn: Those are British proof marks. What you have may be a .38 S&W British Service revolver (WWII made on the K frame, concurrent with the Victory model) that later has the chambers bored through to allow .38 special to be chambered...
Gurn never said it will chamber a .38 Special cartridge.

OK, a little history lesson about these guns... a lot of this is rehashed from earlier in the thread, but I'll save people the trouble of searching back.

Great Britain received hundreds of thousands of S&W revolvers during WWII, both through the Lend-Lease program and outright purchase. All were chambered in .38 Smith & Wesson (.38S&W), which was called .38/200 by the Brits; it's an old low-powered round used in 19th-century S&W top-break revolvers. (The reasons for adopting such a wimpy round as a military service cartridge have been hotly debated ever since it first happened, but we'll leave that for another thread. ) Most of these guns originally had 5" barrels, dull black phosphate finish, and smooth walnut grips.

The British military converted to 9mm Luger semi-autos after the war and sold all of their S&W revolvers, mostly during the 50s and 60s, although a few trickled out later. Most went to the USA for commercial sale but some others went to European police agencies; many of these were subsequently resold again in the USA. During the 50s, there was a booming market in milsurp firearms through American mail order houses and neighborhood businesses such as gas stations and hardware stores, and most of these revolvers were sold through these outlets for dirt cheap prices. Most wound up in cash drawers and sock drawers in the bad parts of town. Some were sold relatively unmolested, but others were modified by the importers to increase their commercial appeal; typical modifications included reaming the cylinders out to accept more powerful and widely available .38 Special cartridges, refinishing, shortening the barrels, and replacing the grips with aftermarket ones. Depending on the importer, the quality of these modifications varies from pretty good to abysmal, but tends towards the latter. These guns are generally considered undesirable by collectors.

.38S&W cartridges use a case that's shorter than a .38Spl, but actually use a slightly larger-diameter case and bullet, .361"-caliber rather than .357"-caliber. (Contrary to what you might assume, the .38Spl round, despite also being developed by Smith & Wesson, is based on the .38 Long Colt and not the .38S&W.) If .38Spl cartridges are fired in one of these reamed-out .38S&W revolvers, the cases will usually bulge due to the excess chamber diameter; this can lead to hard extraction and split cases, especially if you handload and try to resize them. These guns usually also suffer from subpar accuracy due to the "oversize" barrel; however, they'll shoot better with lead bullets than harder jacketed bullets because the softer lead will expand and grip the rifling better. If you decide to shoot one, stick to standard-pressure non-jacketed rounds, and expect patterns rather than groups.
carguychris is offline  
Old March 12, 2009, 12:33 AM   #1190
cartman
Member
 
Join Date: January 25, 2009
Location: behind a rock in my back yard in Pennsylvania
Posts: 20
Have a question for you guys, today I was at my buddies gun shop when an old S&W came in on trade, I bought it on the spot for the right price now the question is , it is an old K frame 22 Model 17 master piece 6 inch serial number 42XXX nothing else on it all original no cracks in the grips and checkering is like new no signs of wear only bluing wear is at the muzzle and only one little spot on one side any Idea as to age and value? my buddy was tickled to see me get this one I have collected smiths for years now and this is the 1st time I lucked into a nice one like this. Thinking of getting a letter on this one. I'll try and post a pic tomorrow
Thanks guys
cartman is offline  
Old March 12, 2009, 07:21 AM   #1191
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Cartman, I think you have quoted an assembly number, not the serial number. Assembly numbers are often stamped on the frame under the crane, it was a number for keeping track of parts at the factory. The serial number should be on the underside of the grip frame, you may have to take off the grips to see it.

If it is a prewar K22 Outdoorsman then the serial number range is 632132 to 682419. If it is a prewar K22 Masterpiece then the serial number range is 682420 to 696952.
If it is a post war K22 Masterpiece then it should have a K prefix to the serial number.
If it is a post 1957 Model 17 it should have a K prefix or within the serial number and have model 17 stamped under the crane on the frame.
Radagast is offline  
Old March 12, 2009, 08:15 AM   #1192
gurn
Junior Member
 
Join Date: March 10, 2009
Posts: 7
Pics of 38

I have uploaded the pics to see if that helps in id. Thanks for all the help.





Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
gurn is offline  
Old March 12, 2009, 08:49 AM   #1193
carguychris
Senior Member
 
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
Gurn,

You have a British-contract military .38/200 revolver. It's basically the same as a .38 Military & Police Model of 1905, 4th Change. Many collectors would call your gun a "pre-Victory" because it predates the "V" serial number prefix that S&W started using when serial numbers passed 999,999 (they restarted at V1).

It's wearing the original matte grey-black phosphate finish, but the stocks (grips) are either aftermarket or creatively redone originals. The front sight is not original. Judging by the barrel stamp, it has been rechambered in .38Spl. Unfortunately, the barrel has been cut, and the 'smith hacked off the front locking lug that holds the front of the ejector rod in place. This was often done by importers because it's easier and cheaper than repositioning the locking lug and installing a shorter ejector rod. The front locking lug is essential for proper lockup and cylinder alignment. The accuracy of this gun will probably be quite subpar if it's safe to shoot at all. Get it checked out by a gunsmith. It may be a wallhanger.

I hate to be the bearer of bad news...
carguychris is offline  
Old March 12, 2009, 11:21 AM   #1194
tgsavell
Junior Member
 
Join Date: March 11, 2009
Posts: 13
S&W serial numbers

Hi, I have 3 revolvers I am interested in finding when they were made.

1. S&W model 36 Serial number J4492XX

2. S&W model 10-5 Serial number 561XX

3. S&W 38 Special OTG Serial Number 3499XX I know these were made from 1915 to 1947 curious as to when this one was made.

I appreciate it.

Tyson
tgsavell is offline  
Old March 12, 2009, 11:43 AM   #1195
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
1. S&W model 36 Serial number J4492XX

2. S&W model 10-5 Serial number 561XX

3. S&W 38 Special OTG Serial Number 3499XX I know these were made from 1915 to 1947 curious as to when this one was made.
1) J4492XX = 1976/77
2) There should be a letter prefix of "C" or "D" on your 10-5.
3) All the book list is 241704 in 1915 to 700000 in 1942.

Jim
laytonj1 is offline  
Old March 12, 2009, 03:35 PM   #1196
bluetopper
Senior Member
 
Join Date: December 16, 2005
Location: Northeast TX
Posts: 1,201
A big thanks Jim for this look-up service you're doing for us Firing Line members!!!

Saying that......... can you look up my newly aquired today pinned and recessed Model 29-2 Serial # N70225x.
bluetopper is offline  
Old March 12, 2009, 06:45 PM   #1197
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Saying that......... can you look up my newly aquired today pinned and recessed Model 29-2 Serial # N70225x.
No problem, 1980.

Jim
laytonj1 is offline  
Old March 12, 2009, 06:59 PM   #1198
tgsavell
Junior Member
 
Join Date: March 11, 2009
Posts: 13
Quote:
1. S&W model 36 Serial number J4492XX

2. S&W model 10-5 Serial number 561XX

3. S&W 38 Special OTG Serial Number 3499XX I know these were made from 1915 to 1947 curious as to when this one was made.

1) J4492XX = 1976/77
2) There should be a letter prefix of "C" or "D" on your 10-5.
3) All the book list is 241704 in 1915 to 700000 in 1942.

Jim
Thanks Jim Stamped under the serial number is what appears to be a Q follwed by G-5 underneath the Q
tgsavell is offline  
Old March 12, 2009, 07:21 PM   #1199
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Thanks Jim Stamped under the serial number is what appears to be a Q follwed by G-5 underneath the Q
Take the serial number off the bottom of the grip butt.

Jim
laytonj1 is offline  
Old March 12, 2009, 08:03 PM   #1200
tgsavell
Junior Member
 
Join Date: March 11, 2009
Posts: 13
Take the serial number off the bottom of the grip butt.

I guess it has been removed. There is no blueing on the butt and its not exactly flush with the bottom of the grips. They did a good job grinding it off though only numbers are in front of the chamber. MOD 10-5 on the frame connecting the barrel. 5617X on the chamber arm with Q then G-5 underneath the Q.

Tyson

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
tgsavell is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:26 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.66018 seconds with 9 queries