March 3, 2024, 10:21 AM | #1 |
Senior Member
Join Date: September 22, 2019
Location: Colorado
Posts: 260
|
45 Auto Rim
I have 73ea loaded 45 auto rim cartridges that my cousin bought at an estate sale a while back.
Where can I find a place to post these or find someone who would want them? I don't have any gun that can fire them, i think they are fairly rare. Thanks |
March 3, 2024, 11:09 AM | #2 |
Senior Member
Join Date: August 6, 2006
Location: Middle of Nebraska
Posts: 944
|
Anyone with a S&W or Colt, M1917 revolver would probably be interested in them. You can post them below in the Gun Show forums. There's also GunBroker if you wanted to go that route.
__________________
I reject your reality and substitute my own. |
March 3, 2024, 09:27 PM | #3 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,871
|
Verifiable factory loaded rounds or reloads?? Original factory box(es)?? Makes a difference in what they're worth.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
March 4, 2024, 03:55 AM | #4 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,427
|
Gunbroker is your best bet.
Specify reloads or factory. Otherwise, you may have an unhappy buyer.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
March 4, 2024, 07:16 AM | #5 |
Senior Member
Join Date: July 1, 2001
Posts: 6,334
|
They won’t fit in 45 Colt, right? Due to that thick rim??
|
March 4, 2024, 09:33 AM | #6 |
Senior Member
Join Date: September 22, 2019
Location: Colorado
Posts: 260
|
They are in a Ziplock bag, they look to be factory, but how can I tell? I guess I will get my strong magnifier out and look for resizing marks or something.
|
March 4, 2024, 10:40 AM | #7 |
Senior Member
Join Date: September 22, 2019
Location: Colorado
Posts: 260
|
45 Auto Rim will not chamber in a Colt with a . 45 ACP cylinder. The rim is too thick to fit through the gap.Oct 3, 2022
|
March 4, 2024, 03:08 PM | #8 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,871
|
The .45 Auto Rim was introduced by the Peters Cartridge Company in 1920.
It was specifically designed to work in the 1917 Colt and S&W .45ACP revolvers. The large thick rim means the round does not require clips to work in those guns. It does not fit in other .45acp revolvers, the rim is too thick. Last time I looked the .45 Auto Rim was still listed as being an "in production" round. That doesn't mean it is being produced every day, today, production of many rounds is "seasonal", meaning they are made in batches, not constantly. When the inventory reaches a set low point, the factories set up the tooling and produce X number of rounds, then pack it away, again, until the next time. The only factory .45AR loading I'm aware of is a 230gr LRN. Lack of resizing marks on the ammo you have is not proof it is factory ammo. Without the assurance of the ammo being in a factory box and looking correct, it should not be sold as factory ammo, and should be offered for components only.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
March 4, 2024, 07:52 PM | #9 |
Senior Member
Join Date: September 22, 2019
Location: Colorado
Posts: 260
|
Thanks 44 Amp,
I guess since i could never prove these were factory rounds, I should just dispose of them in a proper way. Thanks so much for all the professional help on here.. |
March 5, 2024, 02:07 PM | #10 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,871
|
Quote:
If you have the tools, time, and the inclination, you could pull them down and toss the powder, removing any risk of them being used as ammo.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
March 6, 2024, 01:58 PM | #11 |
Senior Member
Join Date: December 28, 1998
Posts: 590
|
Bullet pullers aren't expensive. You could buy one and break them down and sell them as primed cases and the bullets. Buyer supplies their own powder and would be happy to have whatever cases you have available.
|
|
|