|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 17, 2013, 07:39 PM | #1 |
Senior Member
Join Date: September 22, 2005
Location: Middle Tennessee
Posts: 273
|
Help me understand this diagram.
This is from the manual for my Mossy 835. It uses Accu-Mag chokes, and I have a couple of questions.
1. According to this, can I use the X-full flush choke with steel shot? 2. If so, what does (STEEL) refer to in the lead shot pattern column next to the X-full choke? #95255 Finally, I'm new to shotgun hunting, so pardon the noob question. What do "Mod T&F", and "Mod. #2, and BB" refer to? I'm trying to understand the usage of the word "pattern" on these columns, and am getting confused a little. Basically, I'm just in need of an explanation of this diagram. Thanks! http://oi47.tinypic.com/2rh4282.jpg |
April 17, 2013, 08:22 PM | #2 |
Senior Member
Join Date: January 2, 2006
Location: Kansas City, MO.
Posts: 580
|
That's a good question. I thought I knew, but I don't want to tell you the wrong info, so I removed it. Hopefully someone more familiar will come along and tell us.
__________________
NRA Benefactor MSSA Life Member Last edited by HuntAndFish; April 17, 2013 at 08:59 PM. |
April 18, 2013, 12:51 AM | #3 |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
1. Yes your manual is saying you can use steel shot in an 835 X-Full
2. I think it was a typo error. Email Mossberg and ask to be sure. The "T, F, #2 and BB" are all steel shot sizes. My understanding was that different size shot, particularly the larger T and F, need more open constriction to give similar patterns to smaller shot. "Pattern" is what we call the group of holes left in a paper target by 1 load of shot fired, generally at 40 yards for testing. It is referred to by shotgunners to show how far the pellets spread at a given distance. A full choke should spread to roughly 40 inches at 40 yards. A modified choke should be close to 40 inches at 30 or 35 yards. Each gun and choke will be slightly different in actual pattern size and density. You choose choke and shot size based on game or target type, and expected distance to the target.
__________________
You can't fix stupid....however ignorance can be cured through education! |
April 18, 2013, 05:36 AM | #4 |
Senior Member
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
|
I have yet to see a Full choke tube that is rated for use with steel shot (or tungsten) that didn't say it right on the tube, but I haven't seen them all. I know Remington was the first, and for a long time the only, manufacturer that made a steel rated flush Full tube, because they used maraging steel. Others have jumped on the bandwagon. What does your Flush Full choke tube say on it?
Larger shot does indeed usually pattern tighter with more open chokes than smaller shot. Improved Modified works well for #2 and bigger in my experience, assuming of course you are looking for the tightest patterns you can get. Brileys has a good discussion of chokes and patterns on their web site. http://www.briley.com/ |
April 18, 2013, 07:35 AM | #5 |
Senior Member
Join Date: September 22, 2005
Location: Middle Tennessee
Posts: 273
|
Yeah, I was wondering about the notations for steel or lead. The Accu-mag chokes have nothing on them besides choke pattern.
For Turkey I'm using #5 copper plated in a full choke, however I'd like the option of not worrying about if I need steel shot for duck, etc. Am I understanding that switching to the X-full might be actually a bad idea? |
April 19, 2013, 02:17 AM | #6 |
Senior Member
Join Date: June 24, 2008
Posts: 2,607
|
I agree it's confusing, but it looks like Mossberg has a choke that throws the equivalent pattern to a Lead XFull when used with Steel shot. In other words the X-FULL (Steel) throws an extra tight pattern when used with steel. It's probably similar to an IM choke when used with lead.
BTW, it would help if you posted your picture right side up. |
April 19, 2013, 07:01 AM | #7 | |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
[
Quote:
All chokes that come with the 835 are safe with steel or lead. Each tube will shoot steel tighter than lead. That is why they gave you the chart. The modified choke shoots lead to the standard modified choke pattern, but steel patterns to a full pattern with the same choke tube. But you need to pattern your gun on paper to see how each load and shot size/type will actually shoot. My 835 and your 835 may shoot the same load differently.
__________________
You can't fix stupid....however ignorance can be cured through education! |
|
April 22, 2013, 11:04 AM | #8 |
Senior Member
Join Date: September 22, 2005
Location: Middle Tennessee
Posts: 273
|
|
April 23, 2013, 09:05 PM | #9 |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
Congratulations thats a beautiful bird.
__________________
You can't fix stupid....however ignorance can be cured through education! |
|
|