|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 21, 2013, 04:38 PM | #1 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
Unknown Falling Block Rifle
Hello everyone, I've got an old rifle I'm trying to find some information about. The steel on this rifle is so badly pitted there's no legible stamping to read, but it's got a 38.5 inch octagon barrel that seems to be chambered in 45-70, not sure though. Fixed iron sights, an inline hammer and a shell ejector. Something that stood out to me was that it has a swivel stop for the lever. Take a look at the photos and tell me what you think. Any information would be appreciated. Thanks.
photo (17).jpg photo (18).jpg photo (20).jpg Last edited by Do not so gently; April 21, 2013 at 06:52 PM. |
April 21, 2013, 09:00 PM | #2 |
Senior Member
Join Date: March 30, 2011
Location: Lompoc California
Posts: 274
|
Looks like a Winchester 1886 High Wall to me.
|
April 21, 2013, 09:41 PM | #3 |
Senior Member
Join Date: January 28, 2006
Posts: 1,482
|
Where did you find that?
__________________
NRA Life Member "We have enough gun control. What we need is idiot control." |
April 21, 2013, 10:35 PM | #4 |
Senior Member
Join Date: March 27, 2009
Posts: 315
|
Well that's NOT a Winchester M1885 High or Lo wall.
|
April 21, 2013, 10:45 PM | #5 |
Senior Member
Join Date: April 24, 2006
Posts: 1,900
|
Not a Winchester... I think.
Maybe a Marlin? Can you tell that I am guessing? |
April 21, 2013, 10:50 PM | #6 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,195
|
Not a Winchester and wouldn't be a high wall if it was. It looks like a Stevens that had the lever rebent and a homemade latch installed.
|
April 22, 2013, 09:13 AM | #7 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
I don't think it's a Stevens.
The lever and block aren't right, nor is the screw layout. It's not a Bullard, I don't think it's any flavor of Ballard... The sweep of the lever looks more Ballard to me, but not much else does... I feel as if I've seen it before, but I just can't pin it down.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 09:54 AM | #8 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
A friend of mine found it in South Dakota.
|
April 22, 2013, 09:55 AM | #9 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
Is there anything visible on the barrel flats at all?
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 10:03 AM | #10 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
It's not a Meacham, it's not a Cole....
This should be fairly simple.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 11:00 AM | #11 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
Unknown Falling Block Rifle
Here's a few more photos, the swivel stop was installed professionally by the looks of it. May have been added later by a smith. Another thing I noticed was a couple of brass colored soldering spots along the bottom of the barrel, maybe brass housing for a cleaning rod. Also, there seems to be a letter 'B' stamped on the top of the barrel close to the chamber, it's not clean or straight so I doubt it's factory. I appreciate all the support on this, let me know what you guys think.
photo (22).jpg photo (23).jpg photo (24).jpg Last edited by Do not so gently; April 22, 2013 at 11:11 AM. |
April 22, 2013, 11:19 AM | #12 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
I suspect that it's not chambered for the .45-70. You'll probably have to do a chamber cast to get a good idea what the cartridge is, but generally you'll only find period low wall rifles chambered for pistol cartridges and the small .22/.25 (primarily rimfire) rifle cartridges.
I'm not getting much in the way of real work done this afternoon because I'm thinking about this so darned much.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 11:45 AM | #13 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
Unknown Falling Block Rifle
Whatever it is chambered is big bore. I've got a 45-70 and the brass rim is an identical fit. The entire round won't chamber all the way though because the bore is so corroded.
photo (26).jpg photo (25).jpg |
April 22, 2013, 12:09 PM | #14 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
The rim is a good fit, but there were a lot of other cartridges that had similar dimensions, including some handgun and rimfire rounds.
The only way to be truly sure would be to try to clean up the chamber. Determining if it's rim or centerfire would also be helpful.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 12:10 PM | #15 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
Holy crap.
I think I may have just found it. Stand by... Crap. Nope. Thought for a second it might be a Ballard 1 1/2 Hunter's Rifle.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 12:15 PM | #16 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
I'm absolutely stumped, and I don't have many good resources on early single shot rifles.
De Haas' books would probably be the ticket to figuring out what this thing is, but I don't have them.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 12:20 PM | #17 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
Unknown Falling Block Rifle
It is centerfire.
|
April 22, 2013, 12:31 PM | #18 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,587
|
I have three of Frank DeHaas' books on single shots and do not see this one in any of them.
Do not pay too much attention to the shape of the lever, I think it is a blacksmith replacement, see the braze at its base in picture 89009. |
April 22, 2013, 12:31 PM | #19 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
I'm going to throw a link to this thread into the Black Powder section.
Some of the regulars there might not have seen this.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 12:31 PM | #20 |
Junior Member
Join Date: April 21, 2013
Posts: 11
|
Appreciate it.
|
April 22, 2013, 12:35 PM | #21 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,409
|
I did see that, Jim, but I KNOW that I have seen this configuration before -- the shape of the hammer and the block, the number and location of screws/pins, the overall shape of the body of the action, and the track on the block tail that is shown when the action is open (later picture).
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
April 22, 2013, 09:14 PM | #22 |
Senior Member
Join Date: January 28, 2006
Posts: 1,482
|
Once we figure out what it is, please share more about where/how it was found.
__________________
NRA Life Member "We have enough gun control. What we need is idiot control." |
April 23, 2013, 12:19 AM | #23 |
Member
Join Date: December 23, 2012
Location: SW Colorado
Posts: 42
|
It looks like a one of a kind gunsmith made with leanings to Stevens rifles,never seen one quite like it but it also seems to mimic Frank de Haas's style.
|
April 23, 2013, 12:45 AM | #24 | |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
Quote:
Don't give up on finding a maker yet. Even if it is a conversion it is a unique piece of history and I think it is worth investigating further. Thanks for sharing your pictures.
__________________
You can't fix stupid....however ignorance can be cured through education! |
|
April 23, 2013, 09:04 AM | #25 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,587
|
I looked real hard at the cam track in the bottom of the breechblock and that was my main focus when leafing through DeHaas. Nada.
It looks almost like the "receiver ring" is a separate part from the action body. Is there a takedown screw somewhere under there? |
Tags |
45-70 , falling block , octagon barrel , rifle , unidentified |
|
|