![]() |
![]() |
#1 |
Junior Member
Join Date: March 16, 2023
Posts: 1
|
1940 Mauser 98 "carved"
I found this while talking guns at the Early Bird Restaurant. Payed 1000.00 for it. It has a lot going for it. Quick release scope and a Mauser plastic butt plate. I found a double pull trigger that will fit it with the drop plate. I want to know if it will drop the value when I install the trigger and hing plate. http://https://www.facebook.com/grou...ibextid=Nif5oz
|
![]() |
![]() |
#2 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 27,742
|
welcome to TFL
link doesn't work for me...
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
![]() |
![]() |
#3 |
Senior Member
Join Date: November 19, 2009
Posts: 3,277
|
link goes nowhere for me as well . . . .
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63 |
![]() |
![]() |
#4 |
Senior Member
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 4,570
|
Steeeerike 3...
__________________
Keep your Axe sharp and your powder dry. |
![]() |
![]() |
#5 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 27,742
|
non functional link, no reply from the OP in a week, I think we'll close this one.
OP, feel free to start another thread on this subject if you wish.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
![]() |
![]() |
Thread Tools | Search this Thread |
|
|