Smith and Wesson serial number search - Page 320

laytonj1 · March 7, 2019, 01:30 PM

Quote:

Originally Posted by Silver_Rings

Hi, I have a S&W 32 top break double action revolver with a sn of 1833xx and would like to know what year it was made.

Thank you for your help.

Silver Rings

Closest I can get you is serial numbers for a .32 Double Action 4th Model ran from 43406 in 1883 to 282999 in 1909.

Jim

Silver_Rings · March 7, 2019, 09:50 PM

Thanks for your help Jim.

Silver Rings

hein4 · March 16, 2019, 01:07 PM

Hi, it would be greatly appreciated if someone could tell me the year for a six inch 629 no dash.

N7794xx.

Thanks alot.

laytonj1 · March 16, 2019, 09:43 PM

Quote:

Originally Posted by hein4

Hi, it would be greatly appreciated if someone could tell me the year for a six inch 629 no dash.

N7794xx.

Thanks alot.

I can do better than that, N778966 thru N779765 were manufactured on 19 June 1980.

Jim

hein4 · March 16, 2019, 11:45 PM

Wow, thanks a ton Jim.
Now I can celebrate its birthday

.

fangerdog · March 17, 2019, 12:05 AM

Hello, I have a S&W model 34-1, 2 inch .22 The serial number is 102xxx I've had it since about 1973 and would like to know when it was made.

Thanks for your help

laytonj1 · March 17, 2019, 07:00 PM

Quote:

Originally Posted by fangerdog

Hello, I have a S&W model 34-1, 2 inch .22 The serial number is 102xxx I've had it since about 1973 and would like to know when it was made.

Thanks for your help

Serial number 70000 was in 1960 and 108087 was in 1965 so yours would fall in 1964/65.

Jim

fangerdog · March 17, 2019, 09:32 PM

Thanks Jim. This service you provide to total strangers is a remarkable act of generosity.
I'm getting up there in age and my wife is suggesting that I should reduce my gun collection. I've shot the 34-1 a lot over the last 45 years and it's been one of my favorites. It'll be hard to part with it.
Thanks again
Ernie

USMC5812 · April 1, 2019, 09:10 PM

I just came into a 357 that looks like it has never been fired. the serial number is 6D70929. can anyone give me a ballpark date of manufacturing?

laytonj1 · April 2, 2019, 06:34 PM

Quote:

Originally Posted by USMC5812

I just came into a 357 that looks like it has never been fired. the serial number is 6D70929. can anyone give me a ballpark date of manufacturing?

1980.
SN’s ran from 6D10001 to 7D10000 that year.

Jim

mhblaw · April 3, 2019, 11:34 AM

I have a 24-6 S# DCE9240, year?

hein4 · April 3, 2019, 01:10 PM

Hi, after aquiring a nearly unfired 617-1, I was wondering when CBA62xx was produced. Thanks in advance!

laytonj1 · April 4, 2019, 05:02 PM

Quote:

Originally Posted by mhblaw

I have a 24-6 S# DCE9240, year?

I don’t have the most current version of the Book. Mine covers up to 2004 and yours is after that. S&W customer service will give you the DOB over the phone for free.

Jim

laytonj1 · April 4, 2019, 05:05 PM

Quote:

Originally Posted by hein4

Hi, after aquiring a nearly unfired 617-1, I was wondering when CBA62xx was produced. Thanks in advance!

1996.

Jim

hein4 · April 4, 2019, 05:32 PM

Thank you Jim for this impeccable service.

Mikeab1 · April 4, 2019, 06:03 PM

I need help with a 32 S&W CTG #247xxx Thank You!!

laytonj1 · April 4, 2019, 06:10 PM

Quote:

Originally Posted by Mikeab1

I need help with a 32 S&W CTG #247xxx Thank You!!

If it is a modern swing out cylinder model then it would be a .32 Hand Ejector Model of 1903, 5th Change. Serial numbers ran from 102501 in 1910 to 263000 in 1917.
If it is a older break top (barrel tips down to load/unload) then I’ll need more info.

BTW, CTG stands for cartridge.

Jim

Mikeab1 · April 4, 2019, 06:56 PM

It is a break top

Mikeab1 · April 4, 2019, 06:58 PM

Quote:

Originally Posted by laytonj1

If it is a modern swing out cylinder model then it would be a .32 Hand Ejector Model of 1903, 5th Change. Serial numbers ran from 102501 in 1910 to 263000 in 1917.
If it is a older break top (barrel tips down to load/unload) then I’ll need more info.

BTW, CTG stands for cartridge.

Jim

It is a break top. Thanks jim

laytonj1 · April 4, 2019, 10:25 PM

Quote:

It is a break top

Okay.
If it's a double action then it would be a .32 Double Action 4th Model. Serial numbers ran from 43406 in 1883 to 282999 in 1909.
The other version is the Safety Hammerless, but they only ran to serial number 242981.

Jim

mhblaw · April 5, 2019, 10:55 AM

Thanks Jim, I knew it was a newer version, just didn't know when.

m&p45acp10+1 · April 11, 2019, 09:02 PM

Model 14-3

SN 8k8333

laytonj1 · April 12, 2019, 02:45 PM

Quote:

Originally Posted by m&p45acp10+1

Model 14-3

SN 8k8333

1975.

Jim

m&p45acp10+1 · April 12, 2019, 08:31 PM

Thank you Jim.

Nate

Diesel74 · April 22, 2019, 09:46 PM

Looking at 19-4 4” 19 appears to be 90% condition but no box or anything else. I have seen old threads of value but seem to be going up. They are asking $899. What do you think of price and the serial # is 56k1xx. What year would this make it? Thanks for any help

March 16, 2019, 01:07 PM	#7978
hein4 Junior Member Join Date: February 19, 2019 Posts: 6	629 no dash Hi, it would be greatly appreciated if someone could tell me the year for a six inch 629 no dash. N7794xx. Thanks alot.

April 1, 2019, 09:10 PM	#7984
USMC5812 Junior Member Join Date: April 1, 2019 Posts: 1	Never owned a smith I just came into a 357 that looks like it has never been fired. the serial number is 6D70929. can anyone give me a ballpark date of manufacturing?

April 11, 2019, 09:02 PM	#7997
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,930	Model 14-3 SN 8k8333 __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

April 12, 2019, 08:31 PM	#7999
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,930	Thank you Jim. Nate __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

April 22, 2019, 09:46 PM	#8000
Diesel74 Junior Member Join Date: April 22, 2019 Posts: 6	Year and Value S&W 19 4” Looking at 19-4 4” 19 appears to be 90% condition but no box or anything else. I have seen old threads of value but seem to be going up. They are asking $899. What do you think of price and the serial # is 56k1xx. What year would this make it? Thanks for any help

March 7, 2019, 09:50 PM	#7977
Silver_Rings Junior Member Join Date: March 6, 2019 Posts: 2	Thanks for your help Jim. Silver Rings

March 16, 2019, 11:45 PM	#7980
hein4 Junior Member Join Date: February 19, 2019 Posts: 6	Wow, thanks a ton Jim. Now I can celebrate its birthday .

March 17, 2019, 12:05 AM	#7981
fangerdog Junior Member Join Date: March 16, 2019 Location: NH Posts: 2	Hello, I have a S&W model 34-1, 2 inch .22 The serial number is 102xxx I've had it since about 1973 and would like to know when it was made. Thanks for your help

March 17, 2019, 09:32 PM	#7983
fangerdog Junior Member Join Date: March 16, 2019 Location: NH Posts: 2	Thanks Jim. This service you provide to total strangers is a remarkable act of generosity. I'm getting up there in age and my wife is suggesting that I should reduce my gun collection. I've shot the 34-1 a lot over the last 45 years and it's been one of my favorites. It'll be hard to part with it. Thanks again Ernie

April 3, 2019, 11:34 AM	#7986
mhblaw Senior Member Join Date: April 16, 2009 Location: North Dakota Posts: 111	I have a 24-6 S# DCE9240, year?

April 3, 2019, 01:10 PM	#7987
hein4 Junior Member Join Date: February 19, 2019 Posts: 6	Hi, after aquiring a nearly unfired 617-1, I was wondering when CBA62xx was produced. Thanks in advance!

April 4, 2019, 05:32 PM	#7990
hein4 Junior Member Join Date: February 19, 2019 Posts: 6	Thank you Jim for this impeccable service.

April 4, 2019, 06:03 PM	#7991
Mikeab1 Junior Member Join Date: April 4, 2019 Posts: 3	I need help with a 32 S&W CTG #247xxx Thank You!!

April 4, 2019, 06:56 PM	#7993
Mikeab1 Junior Member Join Date: April 4, 2019 Posts: 3	It is a break top

April 5, 2019, 10:55 AM	#7996
mhblaw Senior Member Join Date: April 16, 2009 Location: North Dakota Posts: 111	Thanks Jim, I knew it was a newer version, just didn't know when.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search