|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 6, 2015, 07:53 AM | #1 |
Senior Member
Join Date: April 5, 2015
Posts: 171
|
$0sw loads using Power Pistol
Is there anyone using Power Pistol with 155 165 and 170gr jacket and plated and cast bullets. Any help with loads will be helpful. Thanks
|
June 6, 2015, 09:20 AM | #2 |
Senior Member
Join Date: November 6, 2001
Posts: 1,125
|
Just to add some info but check your manuals and work up.
40 S&W 165 gr. Jacketed FP--Win brass--CCI 500 primers--oal 1.125" Power Pistol 6.5-940 fps----6.7-1010----7.0-1030----7.2-1065 fps _________________ 155 Hornady XTP-HP oal 1.125" Power Pistol 8.0 grains---1142 fps ____________ 165 Rem Golden Saber oal 1.125" Power Pistol 7.0-1028 fps __________- These are the only loads I've tested in a Glock 23 with Power Pistol. |
June 6, 2015, 10:14 AM | #3 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
link to online Alliant Load information
http://www.alliantpowder.com/reloade...aspx?gtypeid=1 What does your manual(s) show you?
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
June 6, 2015, 10:42 AM | #4 |
Senior Member
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
|
You have asked for information over to broad a field. To many choices. You might get more responses if you told us the particular bullet(s) you are looking to load.
As an example. for 165 gr. Berry's HBFPTP, I have used R-P brass, Tula SP primers, Power Pistol at 6.8 grains with OAL of 1.120" Another example, 180 gr. Berry's FP, R-P brass, CCI 500 primer, Power Pistol 6.5 grains, OAL of 1.120" These work well in my IWI Jericho/BE, but that doesn't mean a thing; for your firearm will differ.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part. |
|
|