The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old January 20, 2012, 10:23 PM   #4951
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial#aun0xxx
1986/87.

Jim
laytonj1 is offline  
Old January 21, 2012, 12:46 AM   #4952
bamamate
Junior Member
 
Join Date: January 21, 2012
Location: Arkansas
Posts: 3
38 SPL M&P 4th gen?

I've read a good few post in this thread so I think I've got it narrowed down but would appreciate verification
Per the box it is a 38 Military & Police 5"
serial# 541977
That would make it a 4th gen 1915-1945. With the serial number probably late 30s-early 40s?
4th gens have the upgraded safety so it is safe to have all 6 loaded?
Don't use plus ammo?
Beyond that is there any safety concerns I should know as I regularly shoot it with a standard 136gr and have used it to teach my kids to shoot.
It was my dad's gun and spent most of its life in a leather holster in the top of the closet.
My best guess from the gunbroker, gunsamerica is it is worth 500-700 though I may be over estimating the condition.
Does having the box and cleaning rod increase the value?

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
bamamate is offline  
Old January 22, 2012, 02:26 AM   #4953
74gene
Junior Member
 
Join Date: January 22, 2012
Posts: 2
K 38 ID is it a model 18 or a masterpiece

I just picked up a K frame 38 S/N is K 3164xx the gun is a beauty but someone had cut down the barrel , What I want to do is get a replacement for it and it is a 4 screw . thank for any help What I am trying to find out is the year and model

Last edited by 74gene; January 22, 2012 at 03:03 AM. Reason: forgot question
74gene is offline  
Old January 22, 2012, 11:43 AM   #4954
vegas16
Junior Member
 
Join Date: January 22, 2012
Posts: 2
Hello, my dad just passed down to me the gun my grandfather gave him. He knew nothing about it and never was into guns so I was trying to find out a little information on it.
So far I gather it is a
s&w, with 38 s&w special ctg on the barrel
5 inch barrel. swing out to load
ser # S 580xxx
blue finish to it

thanks for your help
vegas16 is offline  
Old January 22, 2012, 02:45 PM   #4955
buzzman2
Junior Member
 
Join Date: January 22, 2012
Location: SW Ohio
Posts: 3
Model 65-1

Hello everyone. I found this forum as I was searching for information on a S&W 65-1 that I picked up from a friend a few years ago. As I was searching, I figured out that I have an early model (-1) with pinned barrel and recessed cylinder chambers.

It is a 4" barrel model. It is in perfect condition except for the side plate, where someone engraved numbers and initials. I am trying to decide if I want to have it repaired by Smith and Wesson. They provided me a quote a few years ago of $200 to replace the sideplate and refinish the gun.

s/n 1D16XXX When was it made? Any idea on value?

Attachment 77928



Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
buzzman2 is offline  
Old January 22, 2012, 03:42 PM   #4956
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Per the box it is a 38 Military & Police 5"
serial# 541977
That would make it a 4th gen 1915-1945. With the serial number probably late 30s-early 40s?
4th gens have the upgraded safety so it is safe to have all 6 loaded?
Don't use plus ammo?
Early 30's.
The 4th Change new style hammer block was in 1944. Prior to that if dropped on the hammer it could fire.
No +P.
It's great you have the box and cleaning rod and that adds more value but I noticed what appears to be some pitting/corrosion on the barrel so that will bring the price down some.

Quote:
K frame 38 S/N is K 3164xx
1957.
SN's ran from K288989 to K317822 that year.
If the original barrel was 6" it would be a K-38 Masterpiece (pre model 14), 4" or less would be a K-38 Combat Masterpiece (pre model 15).


Quote:
ser # S 580xxx
Could you double check that serial number. Make sure that 5 is not an 8.
S prefixes ran from S62469 to S333454 and S811120 to S999999.

Quote:
s/n 35xxx
See pic for serial number location:

Jim
laytonj1 is offline  
Old January 22, 2012, 04:19 PM   #4957
buzzman2
Junior Member
 
Join Date: January 22, 2012
Location: SW Ohio
Posts: 3
I updated my post on the 65-1

s/n 1D16XXX

Any idea on value? I have the box, cleaning accessories, screwdriver, and original grip, which looks new.
buzzman2 is offline  
Old January 22, 2012, 04:20 PM   #4958
bamamate
Junior Member
 
Join Date: January 21, 2012
Location: Arkansas
Posts: 3
Thanks Layton!

Early 30's means my dad wasn't the first owner. I may shop it around and see what I can trade for it, as it has no sentimental value to me. Again thanks for your information.
bamamate is offline  
Old January 22, 2012, 06:23 PM   #4959
vegas16
Junior Member
 
Join Date: January 22, 2012
Posts: 2
my mistake, the serial # is S 850xxx
5inch barrel, .38 special
Thanks
vegas16 is offline  
Old January 22, 2012, 06:59 PM   #4960
74gene
Junior Member
 
Join Date: January 22, 2012
Posts: 2
Thank you Layton

It was a 6" cut down to a 3" it just says esson where the ejector stop is on the barrel and that is about a 1/2 inch from where it was cut
74gene is offline  
Old January 22, 2012, 11:32 PM   #4961
cornbush
Senior Member
 
Join Date: September 29, 2008
Location: The retarded place below Idaho
Posts: 1,408
Model 29-3, serial number AHF 6xxx year of manufacture?
__________________
The best shot I ever made was an accident

Last edited by cornbush; January 23, 2012 at 12:23 AM.
cornbush is offline  
Old January 23, 2012, 08:52 AM   #4962
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
s/n 1D16XXX
SN's ran from 1D1 in 1976 to 1D30000 in 1977.
Your pics show as a red X for me.
If the side plate was not engraved and with the box/accessories, maybe $450.
It's not really worth the $200 to replace the sideplate though.

Quote:
S 850xxx
.38 Military & Police (postwar).
SN's ran from S811120 in 1945 to S999999 in 1948.
It went on to become the Model 10 when S&W began assigning model numbers around 1957.

BTW, barrel length is measured from the face of the cylinder to the end of the barrel.

Quote:
Model 29-3, serial number AHF 6xxx
1986.

Last edited by laytonj1; January 23, 2012 at 08:59 AM.
laytonj1 is offline  
Old January 23, 2012, 09:50 AM   #4963
mhblaw
Senior Member
 
Join Date: April 16, 2009
Location: North Dakota
Posts: 111
S&W serial numbers

Just acquired Model 18, S# 18K58xx. Made ?
mhblaw is offline  
Old January 23, 2012, 12:12 PM   #4964
cornbush
Senior Member
 
Join Date: September 29, 2008
Location: The retarded place below Idaho
Posts: 1,408
Thanks, its a little earlier than I thought
__________________
The best shot I ever made was an accident
cornbush is offline  
Old January 23, 2012, 12:14 PM   #4965
buzzman2
Junior Member
 
Join Date: January 22, 2012
Location: SW Ohio
Posts: 3
Quote:
Your pics show as a red X for me.
If the side plate was not engraved and with the box/accessories, maybe $450.
It's not really worth the $200 to replace the sideplate though.
I fixed the image of the sideplate.

I paid 200 for it. What do you think it would be worth as is?
buzzman2 is offline  
Old January 23, 2012, 05:31 PM   #4966
bigdady321
Junior Member
 
Join Date: January 23, 2012
Posts: 2
Hello everyone! Wondering if anyone new the production year for a model 10 38 sp ser#c375xxx Any help would be greatly appreciated!!!!
bigdady321 is offline  
Old January 23, 2012, 07:31 PM   #4967
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model 18, S# 18K58xx
1977.

Quote:
I paid 200 for it. What do you think it would be worth as is?
More then you paid.
It's hard to put a value on a gun with cosmetic damage because it may bother some folks more than others.

Quote:
ser#c375xxx
Serial numbers ran from C277555 in 1954 to C402923 in 1956.

Jim
laytonj1 is offline  
Old January 23, 2012, 08:00 PM   #4968
bigdady321
Junior Member
 
Join Date: January 23, 2012
Posts: 2
cool!!! Thank you very much!!!
bigdady321 is offline  
Old January 24, 2012, 01:38 AM   #4969
Shadowman1472
Junior Member
 
Join Date: January 24, 2012
Posts: 1
.38 S&W with British Proofs

Hey guys hopefully yall can help,
I have a .38 cal. S&W revolver serial number 687237 with British Proofs on the barrel, frame, and cylinder.
I was wondering if someone could tell me a little background, what year it was made in and approximate value. Attachment 77959Attachment 77960

Thanks in advance

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Shadowman1472 is offline  
Old January 24, 2012, 12:06 PM   #4970
gawxnative
Junior Member
 
Join Date: January 24, 2012
Posts: 1
Model 29-2

Have question as to year...serial number is N424xxx. any help would be appreciated. To my knowledge it was purchased in mid 70's Thanks
gawxnative is offline  
Old January 24, 2012, 05:59 PM   #4971
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial number 687237 with British Proofs
It's a .38/200 British Service Revolver (Model K-200).
These were sold to the British from 1940 to 1945. Yours dates from the first or second year.
I really don't know what the value on it would be but based on the condition, less than $500....

Note, the chambering is 38 S&W, not to be confused with 38 Special.

Quote:
N424xxx
N4xxxxx ran from 1977 to 1978.

Jim
laytonj1 is offline  
Old January 26, 2012, 03:50 PM   #4972
psranch
Junior Member
 
Join Date: January 26, 2012
Posts: 1
S&W 19

I just purchased 2 S&W model 19s and would like some help finding date of manufacture. The first is a S&W 19-3, blued 4", serial number 2K46XXX. The second is a S&W 19-6, Nickel 6", serial number BBF8XXX. Would appreciate all the info I can get. Thanks!

Last edited by psranch; January 26, 2012 at 04:10 PM.
psranch is offline  
Old January 26, 2012, 04:50 PM   #4973
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
Needing a date on an I-frame, 32 S&W long Regulation & Police Target, 6" barrel with adjustable rear sights, serial number 5049XX. Best guess is somewhere mid-late 20's to mid 30's. Would like to narrow that down if possible.

Any help is greatly appreciated.
oneounceload is offline  
Old January 26, 2012, 07:17 PM   #4974
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
2K46XXX. BBF8XXX
2K46xxx = 1971
BBF8xxx = 1988

Quote:
serial number 5049XX
The SCSW doesn't break the serial numbers down any further then 260000 in 1917 to 536000 in 1942.

However, it does list some sold to the MSP in 1929 in the 508000 to 509000 serial number range.

Jim
laytonj1 is offline  
Old January 26, 2012, 07:25 PM   #4975
Speuboy
Junior Member
 
Join Date: January 26, 2012
Posts: 1
.44mag

Just picked it up today wondering if you guys could help me BBJ5XXX
Speuboy is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.46737 seconds with 9 queries