![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,834
|
Oiling a rifle for truck gun?
So what would be a good oil to keep it safe from rusting? Right now I will be using REM OIL, every other month will be tossing wet REM OIL patches down the barrel to keep rust away. And removing the stock for a full coat of REM OIL.
|
![]() |
![]() |
#2 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
I use RIG to coat all exposed parts.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
![]() |
![]() |
#3 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
For long term exposure in nasty weather I use a motorcycle product made by S100 called, appropriately enough, "Corrosion Protectant".
According to this test, Eezox or Corrosion-X are about the best products out there. I've used Eezox, but until I read this, I'd not heard of Corrosion-X. C
__________________
Shoulder Drive Nicholson Club |
![]() |
![]() |
#4 |
Senior Member
Join Date: January 9, 2011
Location: Land of the Free
Posts: 2,834
|
I saw the Eezox tests, but I havn't heard much on them. I guess I will be using that, after those tests.
|
![]() |
![]() |
#5 |
Senior Member
Join Date: September 15, 2007
Posts: 1,707
|
What do you employ as a truck gun?
Not to say that you don't have to take care of any rifle you use in this role, only that some do not require the same attention as others may. Ferinstance, something with a painted finish and a chrome bore would be less likely to get rusty I would think than would something with a nice, deep, blued finish.
|
![]() |
![]() |
#6 |
Senior Member
Join Date: September 19, 2012
Location: Somewhere out there
Posts: 184
|
Motorcycle 2-cycle oil is great! But what I have found to work the best is Lucas Oil, you can find it a your local automotive store. Its perfect for a truck gun considering the fact that the temperatures in a vehicle change drastically along with humidity.
__________________
12 Gauge Fury! |
![]() |
![]() |
#7 |
Senior Member
Join Date: September 16, 2009
Location: I live in the foot of the Green Mountains of Vermont
Posts: 1,602
|
Plain old paste wax on everything outside , FluidFilm on the inside !
|
![]() |
![]() |
#8 |
Senior Member
Join Date: March 21, 2005
Posts: 433
|
Balistol !!
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: September 2, 2010
Location: Plainview , Long Island NY
Posts: 3,863
|
Ballistol
|
![]() |
![]() |
#10 |
Junior member
Join Date: May 16, 2008
Posts: 9,995
|
REM OIL is about the worst IMO.
I also use RIG for external. |
![]() |
![]() |
#11 |
Staff
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,994
|
I've had very good luck with MP-5 metalophilic oil, but it can get gummy if you put too much on. It just takes a very thin film. It's not a lube, just a protectant.
Birchwood Casey Sheath is supposed to be pretty good, but I haven't had as much experience with it.
__________________
Do you know about the TEXAS State Rifle Association?
|
![]() |
![]() |
|
|