|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 20, 2024, 09:36 PM | #1 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 3,977
|
Magpul MOE PR stock, don't like it.
Hey, This will short and sweet. The MOE PR looked like it had great potential, however, like the regular MOE stock it is loose and wiggled all over the place on the buffer tube making the bag rider portion and "precision features" a moot point IMHO. I am trying to see if I can return it.
https://magpul.com/moe-pr-carbine-st...obal_color=118
__________________
I don't believe in "range fodder" that is why I reload. |
February 20, 2024, 10:34 PM | #2 |
Senior Member
Join Date: September 28, 2013
Posts: 3,829
|
I have a Rogers super stock. It has a 2nd level to lock the stock to tube. Feels very solid. No wiggle at all. Its cheek rest is a bit too low for me though, so I taped a layer of foam to make it work.
-TL Sent from my SM-N960U using Tapatalk |
February 20, 2024, 11:12 PM | #3 |
Junior Member
Join Date: September 29, 2023
Posts: 11
|
Too bad you didn’t see the reviews before you bought it. You aren’t alone. Thanks for the heads up.
|
February 21, 2024, 01:31 AM | #4 |
Senior Member
Join Date: October 9, 2009
Location: North Alabama
Posts: 8,314
|
two diameters
As near as I can tell, Magpul offers some of their stocks in TWO different diameters, commercial and mil spec. Do some checking and you will find that the case with the carbine "shorty" for certain. I suspect the PR might be the same way.
I've got the shorty carbine model installed on an M&P, it is rock solid and my favorite AR stock. |
February 21, 2024, 04:27 PM | #5 |
Member
Join Date: August 25, 2015
Location: Western Pa
Posts: 53
|
Another vote for the Rogers Super Stock. Mine came with a couple of wedges that I never used, but nonetheless were in the box. You install a wedge touching the receiver extension where the bolt goes thru for the lock. The wedge takes up any rattle room.
If you cant send it back and want to try something, heat the stock up with it on the tube with a hair dryer. A friend of mine used a hair dryer to tighten his up. I guess you could also use a heat gun but be careful not to burn a hole in it. Alot of plastic will work like shrink wrap and snug up to the steel it is mounted on. Good luck with it. I know alot of the Retro guys go thru this trying to get their rifles right. |
February 21, 2024, 05:08 PM | #6 | |
Senior Member
Join Date: September 28, 2013
Posts: 3,829
|
Quote:
-TL Sent from my SM-N960U using Tapatalk |
|
February 24, 2024, 05:58 PM | #7 |
Senior Member
Join Date: September 28, 2013
Posts: 3,829
|
Well that peaks my curiosity. I dug out my cheapo mil spec stock that I have never used. It is indeed pretty sloppy on a mil spec tube. With metal foil with adhesive I shimmed inside of the stock to take out the lateral slop, but I couldn't do anything about the back and forth (longitudinal) slop. That's that. I'm going back to my Rogers super stock with taped on foam cheek rest.
The mil spec vs commercial buffer tube angle won't work, I'm afraid. Commercial tube has bigger diameter. But it only fit commerical spec lower receiver. I can't put a fatter commercial tube on a mil spec lower to make the stock fit better. -TL Sent from my SM-N960U using Tapatalk |
February 25, 2024, 10:50 PM | #8 |
Senior Member
Join Date: July 1, 2001
Posts: 6,334
|
I’d look at the MOE-SL if I were you.
|
March 2, 2024, 05:00 PM | #9 |
Senior Member
Join Date: December 13, 2005
Posts: 4,462
|
If you want a rifle stock that has a flat portion for bag use and doesn't rattle, there is the Luth MBA2. https://ar15discounts.com/products/l...n-rifle-stock/
It's about A2 length and has some sharp corners at the bottom of the butt that are uncomfortable in a standing olympic position, but it is so tight I wasn't sure I would get it over the receiver extension.
__________________
http://www.npboards.com/index.php |
March 10, 2024, 06:12 AM | #10 |
Senior Member
Join Date: March 2, 2014
Posts: 11,797
|
My favorite AR stocks are either the magpul CTR or--one of their cheapest--the fixed rifle.
__________________
"Everyone speaks gun."--Robert O'Neill I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk! |
|
|