|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 30, 2012, 02:36 PM | #1 |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Rimfire calibres to centrefire. Why not?
Perhaps there is a very simple and clear answer to this, but I don't know it as yet. I once asked if people loaded their own rimfire cases and the concensus was that it was too much hassle given the cost of ammo.
However, I have since had another idea pop into my head. I have heard it said that rimfire cartridges are more prone to FTF (relatively speaking) due to sometimes uneven spread of the priming compound and, once used, rimfire cases can't be reused. So why have ammo companies not introduced centrefire versions of these calibres as I think the cases would be wide enough to cradle a small pistol primer. It would mean that reloading .22LR and .22Mag would become an option... My only guess is cost of priming a case versus slopping some primer paste at the bottom when the entire cartridges are so cheap, and that there are stacks of firearms already out there with the pin on the edge of the chamber. That or the fact the primer would take up too much space in the case otherwise used for powder. Is one of these the reason, or are there other considerations?
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
September 30, 2012, 02:50 PM | #2 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
There are absolutely enormous amounts of 22 rimfire cartridges made .The fact that they are relatively cheap is that they don't have a primer cup and anvil.
The case would also have to be redesigned to handle the installation and forces of the CF primer.And then there are the guns .You want to redesign and modify existing guns ?? Let it be ,live the simple life !
__________________
And Watson , bring your revolver ! |
September 30, 2012, 03:34 PM | #3 | |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Quote:
There seem to be loads of calibres that companies invented for which existing models had to be chambered and redesigned. This would be no different...
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
|
September 30, 2012, 03:44 PM | #4 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Why would you want to go from paying 20 bucks or so for 550 rounds to 20 bucks or so for 50?
|
September 30, 2012, 03:47 PM | #5 |
Senior Member
Join Date: March 6, 2006
Location: Central Florida
Posts: 3,324
|
There has been an enormous number of centerfire 22 cartridges introduced over the years with varied success.
I just don't see the need for one with the same outward dimensions as the venerable 22lr. Just buy yourself a 22 Hornet and load them light to duplicate 22lr energies.
__________________
Proud NRA Benefactor Member |
September 30, 2012, 04:03 PM | #6 |
Senior Member
Join Date: July 20, 2005
Location: Indiana
Posts: 10,446
|
You would lose a good deal of case capacity by trying to make a centerfire equivalent to an existing rimfire case. You see, a good deal of the back portion of a centerfire case is not hollow and does not contain any powder. This area is is necessary to contain the primer. Rimfire cases, on the other hand, typically lack this solid area and are hollow all the way back to the base of the case.
|
September 30, 2012, 04:10 PM | #7 |
Staff
Join Date: September 25, 2008
Location: CONUS
Posts: 18,476
|
I could have sworn that this exact topic/suggestion came up just a few days or weeks ago, but I can't find it. Maybe on another site?
|
September 30, 2012, 04:11 PM | #8 |
Senior Member
Join Date: September 13, 2005
Posts: 4,700
|
Years ago Charlie Askins had a Colt Woodsman modified to fire a 22 centerfire catridge based on the French 5.5 Velo-Dog. That was his attempt to find a non-recoiling centerfire pistol he could use in 2700 matches, and it led to the ".32 caliber or larger" specification for centerfire ammo in 2700 matches.
|
September 30, 2012, 04:17 PM | #9 |
Senior Member
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
|
I can't imagine why anyone would want to do this, when rimfire ammo is so cheap and plentiful
|
September 30, 2012, 07:00 PM | #10 |
Senior Member
Join Date: June 14, 2004
Location: NY State
Posts: 6,575
|
There was at least one rimfire cartridge that was converted to CF.They then made rifles that you could change from RF to CFwith a little switch. Can't remember the cartrige.
__________________
And Watson , bring your revolver ! |
September 30, 2012, 07:28 PM | #11 |
Senior Member
Join Date: May 30, 2010
Location: Arizona or Ohio depending
Posts: 1,021
|
I find reloading .32 autos a pain because of the small cases, a .22 long rifle size reload seems like more hassle than it could ever be worth.
|
September 30, 2012, 11:32 PM | #12 | |||
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Quote:
Quote:
Nothing expensive about exploring the concept's potential or limitations... Quote:
Such a cartridge would also mean that C-F pistol conversion kits to .22 could be much cheaper: barrel and mags, perhaps
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
|||
September 30, 2012, 11:39 PM | #13 |
Senior Member
Join Date: December 18, 2004
Posts: 1,944
|
25 acp is pretty close to a 22lr. I can't speak for Browning, but I'd guess it was designed for some of the same reasons you mentioned. But it's expensive compared to rimfire rounds.
|
September 30, 2012, 11:45 PM | #14 | |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,544
|
Quote:
The real question is why do you think they haven't? The reason you don't know about them was that they were commercial failures. The latest one I know of was the .22 CCM - Cooper Centerfire Magnum - a centerfire equivalent of .22 WRM. It could be loaded hotter with a solid head case and the strong Cooper action. There was the .22 JGR out of Canada in the 1950s. It was a faint bottleneck, careful examination showed it was a cut down .22 Hornet. But cut down enough that it was the designer's intent to offer conversion of good quality .22 LR firearms. There was a centerfire version of the 5mm Remington but that was a conversion to let people keep shooting their 5mms after inventories of the unsuccessful 5mm Rimfire Magnum were used up. Going far back, there was the .22 Maynard. Mindful of the weaker case heads of the 19th century, they used the obsolete tiny 00 size primer to leave more case web thickness. So it has been tried and tried again. But not enough paying customers cared. |
|
October 1, 2012, 05:02 AM | #15 | |
Senior Member
Join Date: August 4, 2010
Posts: 820
|
Quote:
|
|
October 1, 2012, 06:01 AM | #16 | |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Quote:
Then there is the fact that, in terms of light strikes or failure to ignite, I understand that the rate with rimfires is higher, if not high...
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
|
October 1, 2012, 06:17 AM | #17 |
Senior Member
Join Date: June 16, 2005
Location: AZ
Posts: 3,113
|
The .25 acp was likely designed with the unreliability of rimfire ammo in mind.
If offers similar ballistics to the .22 lr while being reloadable. Why do you think it isn't more popular? |
October 1, 2012, 11:06 AM | #18 | |
Senior Member
Join Date: October 20, 2007
Location: Richardson, TX
Posts: 7,523
|
Quote:
Since .22LR uses a heeled bullet- i.e. the body of the bullet is the same diameter as the case- the bullet must be shoved through the powder residue left by the previous shot; consequently, black powder .22LR basically won't work in semi-automatic firearms because the powder leaves so much residue behind that subsequent rounds won't chamber. The shooter would have to cease firing and clean the gun after only a handful of shots. It's obvious why this wouldn't work in a defensive firearm. This is also the reason that Winchester's first semi-auto rifle, the Model 1903, used a proprietary rimfire round with comparable ballistics to .22LR- the .22 Winchester Automatic. This round was exclusively loaded with smokeless powder to ensure that the gun would function reliably.
__________________
"Smokey, this is not 'Nam. This is bowling. There are rules... MARK IT ZERO!!" - Walter Sobchak Last edited by carguychris; October 1, 2012 at 11:47 AM. Reason: Minor reword... |
|
October 1, 2012, 09:15 PM | #19 |
Senior Member
Join Date: March 27, 2009
Posts: 315
|
The closest thing that I reload in centerfire to a .22LR rimfire is a Morris .297/230 Short. Parent case is a .22 Hornet, shortened to about 0.500", run through a bottle neck die, loaded with a NAA .22 lead bullet (making the round about 0.750" long), loaded with about 3.0gr Unique.
I do it only because I have a rifle chambered for it and I have dies and brass and I'm NUTS! I also have the same rifle in .22LR and shoot that one a WHOLE LOT MORE because it's cheap and easy. I also reload .25ACP and .32 S&W Short ... but as I said ... I'M NUTS! Now, it's not a bad idea ... but the question does remain: HOW MANY PEOPLE OUT THERE ARE NUTS LIKE ME? |
October 1, 2012, 09:37 PM | #20 |
Junior member
Join Date: October 6, 2010
Location: Michigan
Posts: 1,080
|
Hello, Pond, James Pond. This takes me back a few years! Back when I was in high school, I converted a Marlin .22 bolt action rifle to needle-fire..cases were std. rimfire with very small hole in head. .060" drill rod "needle" firing pin. Made a 40gr. heeled .22 bullet mould, & strike-anywhere match head primers. Match head sat on top of charge..pinched between bullet-base & pin.
Worked most of time! But I wanted an honest-to -goodness centerfire. on lathe, I faced off rims of fired cases. Turned up new case-head with small rifle sized primer-pocket & rim out of brass. This was a close fit in case. Low-temp. silver soldered in place. These had a higher report than high velocity long rifles. Case life was pretty good with several re-loadings. All went swimmingly...until one evening. I was returning home from late afternoon squirrel hunt..getting dark in woods & decided to attempt to hit a large walnut on stump. At the shot..an orange ball of flame erupted around front of bolt..I figured I had a case-seperation..this happened sometimes. Upon extracting case..everything looked normal..case intact, no smoke smudges anywhere..primer was still tight. I tried another..and another..every one exhibited this big ball of flame! I finally figured that the red-heat I was subjecting that case head to during silver-soldering..plus the fact that the "walls" of that "head" were only some .020" thick..that case was expanding enough to let gases blow around primer..but then must have sprung back enough to permit a snug primer fit. I kind of lost interest in that project after that. I did turn up cases from solid brass..including primer pocket..but the problem of too litle metal in head was still there. Back in the late 1800's..there was a .22 centerfire Maynard....the .22-10-45...It used a primer of smaller dia. than our .175" dia. small rifle primers. |
October 2, 2012, 09:59 AM | #21 |
Senior Member
Join Date: September 26, 2005
Location: Northern Virginia
Posts: 6,141
|
Actually, if there were a centerfire equivalent to a .22 long rifle, it would be the culmination of a trend, unless you wanted to be picky an say it would have to be equivalent to a .22 short. Metallic cartridges started out as rimfire, of which there were larger calibers available for a long time. Probably the .44 Henry was the best known. There were other metallic cartridge systems as well, including one that had no primer, but they all failed to be popular for very long after central fire became available.
I have frequently read mention of how unreliable rimfire ammunition is but that was never my experience.
__________________
Shoot low, sheriff. They're riding Shetlands! Underneath the starry flag, civilize 'em with a Krag, and return us to our own beloved homes! Buy War Bonds. |
October 2, 2012, 03:49 PM | #22 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,426
|
Quote:
Fiocchi was the only company to produce a large run of .22 CCM ammo, since they were already set up for Velo-Dog production. But... they used a bad lot of alloy when they drew the brass cases. So, they were prone to not just cracking and splitting, but sometimes even crumbling in the hands of the shooter. A (large) bad lot of cases brought an otherwise good cartridge to premature obsolescence. (Though, that's arguable, since most people consider it to be nothing more than a new name on any number of Maynard cartridges and/or the Velo-Dog.)
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
|
|