|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
April 7, 2019, 12:54 PM | #1 |
Senior Member
Join Date: July 5, 2009
Location: Mid Western Michigan
Posts: 1,187
|
Must be able to shoulder?
Is a rifled firearm whose overal length is more than 26” with a barrel length of more than 16” considered a rifle even though it does not have a shoulder stock?
|
April 7, 2019, 01:43 PM | #2 |
Senior Member
Join Date: March 18, 2009
Location: Central Colorado
Posts: 1,001
|
Depends. If it isn't a build from a stripped receiver, then the serial number dictates what it is.
What gun are you talking about, and is it being built, or a factory gun? A little more info would be welcome. For example, if you build a stripped AR15 with a 20" barrel, unless you physically put a rifle stock on it, it can be whatever you want, rifle, "firearm", or pistol. There's nothing against a pistol with a VERY long barrel.
__________________
Those who hammer their swords into plow shares will plow for those who didn't... |
April 7, 2019, 03:02 PM | #3 |
Senior Member
Join Date: July 5, 2009
Location: Mid Western Michigan
Posts: 1,187
|
Say a serialed rifle to start with modified to the fore mentioned dimensions.
|
April 7, 2019, 03:14 PM | #4 |
Senior Member
Join Date: April 7, 2006
Posts: 10,987
|
It would still be considered a rifle.
|
April 7, 2019, 04:10 PM | #5 | ||||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
Quote:
Quote:
A firearm serial number has absolutely nothing to do with whether a firearm is a handgun/rifle/shotgun/silencer/etc What "dictates" whether a particular firearm is a rifle/pistol/etc is by the definitions in Federal law/ATF regulations. Quote:
If a firearm is built first as a pistol, it may subsequently be reconfigured as a rifle or other firearm and later be configured back to pistol.
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
||||
April 7, 2019, 04:15 PM | #6 |
Senior Member
Join Date: April 7, 2006
Posts: 10,987
|
Then, if the gun is converted to a "firearm," can it legally be converted back into a rifle?
|
April 7, 2019, 05:24 PM | #7 |
Senior Member
Join Date: July 5, 2009
Location: Mid Western Michigan
Posts: 1,187
|
“How do you build a stripped AR?”
I live in the state of Michigan and when you buy a stripped AR lower they do a background check on you and then sell you a unregistered lower. When you build it into a firearm or rifle you need not do anything else as far as they are concerned. If you put a stock on it before turning it into a pistol you are breaking the law because once you had put a stock on it you have a rifle and nothing short of a tax stamp will change that. When I build a pistol in Michigan out of the same lower you have to register it with the state as a pistol. It is up to you to take care of the registration. |
April 7, 2019, 06:03 PM | #8 | |
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
pistol>rifle>pistol>firearm>rifle>firearm>pistol. The old saying "Once a rifle, always a rifle" was negated by U.S. vs Thompson Center and ATF Ruling 2011-4 https://www.atf.gov/firearms/docs/ru...stols/download Now it's accurate to say: "First a rifle, always a rifle".
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
|
April 7, 2019, 06:14 PM | #9 | |||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
In every state, Federal law requires the dealer to record a frame or receiver as an "Other Firearm" on the Form 4473. And in every state a purchase of a frame or receiver is subject to the Brady Law. No matter what your state law is, the dealer cannot indicate that a firearm receiver is a Handgun or a Long Gun. If you state has additional paperwork for reporting such state requirements then he would be required to record that. Quote:
An AR lower with attached shoulder stock is not a handgun or long gun until assembled as such.....meaning completed. Until it has a barrel attached it does not meet the definition of "rifle" in Federal law.
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
|||
April 7, 2019, 06:39 PM | #10 | |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,426
|
Quote:
--- So, case in point of "not a rifle": The upper normally lives on a "rifle" lower (though, I bought it as a receiver, so it could be a 'handgun' if the stock was removed). I was having some issues forming cases properly and ended up having to chamber-check each and every case after the forming processes. The easiest way to get the job done, since that upper was NOT on its usual rifle lower at the time, was to just grab my pistol lower (also shipped/transferred as just a receiver) and use it to hold the upper on the mag well block that lives next to my vise. As it sits, that's a "handgun" ... even though the overall length is around 42+ inches and it weighs about 12 lbs. (11 lb 3.4 oz in rifle form; but that pistol lower actually weighs more than the rifle lower.) But... as illogical as it is to consider that a "handgun", if I added a vertical fore-grip to that free-float tube, things would get muddy. If you still consider it a "handgun", then it's an illegal AOW. If you believe it to be a rifle with a very uncomfortable butt, then it's just a rifle (with a vertical fore-grip). The NFA, while difficult to understand at times (especially when first trying to wrap your head around it), usually does provide pretty clear answers to what qualifies as what. But you can also find yourself in a situation with something like the above photo, where one person might consider it to still be a handgun and another might consider it to now be a rifle - with both being correct (and arguably wrong) at the same time. Bottom line: As it sits, that is NOT a rifle. It's still a "handgun".
__________________
Don't even try it. It's even worse than the internet would lead you to believe. |
|
April 7, 2019, 10:43 PM | #11 | ||
Senior Member
Join Date: March 18, 2009
Location: Central Colorado
Posts: 1,001
|
Quote:
Quote:
Is it lunacy? OF COURSE. It is the law? Yes, unfortunately.
__________________
Those who hammer their swords into plow shares will plow for those who didn't... |
||
April 8, 2019, 10:04 AM | #12 |
Senior Member
Join Date: November 4, 2013
Location: Western slope of Colorado
Posts: 3,679
|
Deleted
|
April 8, 2019, 10:14 AM | #13 | ||||||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
I'll save you the embarrassement…...it doesn't appear. In fact, some firearms are not required to have serial numbers. Quote:
Quote:
Quote:
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
||||||
April 8, 2019, 10:42 AM | #14 | |||
Senior Member
Join Date: April 19, 2012
Location: Western PA
Posts: 3,829
|
Quote:
First, a serial number itself has zero bearing on what type of firearm it is. Take my Aero lower receiver I have lying around that I haven’t built yet: If I build it first as a pistol then I can always switch it back and forth between being a pistol or a rifle. If I build it first as a rifle, then I can’t ever build it as a pistol. The serial number has zero effect on that, it’s all in how I build it. Your example of the Mossberg 500 doesn’t have anything to do with the serial number. The 500 in your example can’t be made into a Shockwave “firearm” because the manufacturer built it as a shotgun first, not because of what the serial number is. And as far as your “once a rifle, always a rifle” comment, that went away a long time ago. If you’ve never heard of ATF Ruling 2011-4 then you’re way behind on your NFA knowledge and you should read up before you post advice on these matters.
__________________
0331: "Accuracy by volume." Last edited by Theohazard; April 8, 2019 at 10:48 AM. |
|||
April 8, 2019, 02:00 PM | #15 | ||
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,853
|
Quote:
It is not the number alone, as a number, that defines which class the arm fits it, that is the function of the registration (USING the ser#) as the ID for the gun. Quote:
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
||
April 8, 2019, 02:47 PM | #16 | ||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
||
April 9, 2019, 01:05 AM | #17 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,853
|
Quote:
And I'm no expert, best ask them direct, but while I think there isn't a ser# requirement for something you make, it only applies as long as it's yours. If you sell it, trade it, or give it to someone else, a serial # is required, and I believe it must be at least 3 digits or more. Plus the name and address of the maker, because its now "in commerce".
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
April 9, 2019, 10:56 AM | #18 | |||
Senior Member
Join Date: January 23, 2006
Location: Plano, Texas
Posts: 3,092
|
Quote:
Quote:
Here's a good read on whether you should engrave markings before transferring to another person: http://www.gunsholstersandgear.com/2...emade-firearm/
__________________
Need a FFL in Dallas/Plano/Allen/Frisco/McKinney ? Just EMAIL me. $20 transfers ($10 for CHL, active military,police,fire or schoolteachers) Plano, Texas...........the Gun Nut Capitol of Gun Culture, USA https://www.youtube.com/watch?v=pELwCqz2JfE |
|||
April 10, 2019, 07:45 AM | #19 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
"No matter what your state law is, the dealer cannot indicate that a firearm receiver is a Handgun or a Long Gun."
Praise the Lord, I finally have to agree with DTT. |
|
|