April 6, 2013, 06:32 AM | #1 |
Senior Member
Join Date: September 25, 2012
Location: Chester Va
Posts: 360
|
Dirty Ammo
My brother gave me about 400 rds of 9mm+p rounds that were loose laying around and have some light corrosion on the cases. Can I put live ammo in a tumbler to clean them up? Is there a better way? The ammo is Federal and nickle plated I think.
|
April 6, 2013, 08:23 AM | #2 |
Senior Member
Join Date: January 15, 2013
Location: South Jersey
Posts: 1,416
|
You're probably going to hear mixed answers on that. Why don't you just try to shoot it first to see if there are any problems before worrying about tumbling it? I've shot some pretty crusty looking 9mm and .45 mil surp ammo with no problems.
|
April 6, 2013, 09:03 AM | #3 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
This has been discussed many time and at great length in the handloading forum. The consensus, AFAIK, was that you can tumble loaded ammo.
You might want to search there for the details.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
April 6, 2013, 09:34 AM | #4 |
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
|
It's not a consensus but a majority opinion, there is a difference .
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying. |
April 6, 2013, 11:10 AM | #5 |
Senior Member
Join Date: September 25, 2012
Location: Chester Va
Posts: 360
|
I had a issue with a CZ P01 duty. The round chambered but not to full battery. It would not fire. Then I could only open the slide just a little. I ended up clearing the round by pulling the trigger and it went off sorta to my surprise. I don't want any more surprises. Thanks for the info.
|
April 6, 2013, 09:43 PM | #6 |
Senior Member
Join Date: July 21, 2011
Location: Idaho
Posts: 7,839
|
I've tumbled loaded ammo a few times and never had anything happen to it.
majority vote says it's safe but there is also that little safety voice in the back of your skull telling you that it's a bad idea.
__________________
ignore my complete lack of capitalization. I still have no problem correcting your grammar. I never said half the stuff people said I did-Albert Einstein You can't believe everything you read on the internet-Benjamin Franklin |
April 7, 2013, 07:26 AM | #7 |
Senior Member
Join Date: September 10, 2007
Location: Racoon City
Posts: 934
|
If you use a vibratory tumbler, you are OK. The ammo has already been through a vibratory tumbler twice - once at the factory immediately prior to packaging, and once enroute to the retail outlet. The second vibratory tumbler is huge, and most people call it a truck.
Modern propellents are essentially a type of plastic. In fact nitrocellulose, one of the first mass produced plastics which also happens to be the main ingredient in modern propellants, was used in billiard balls, collars, and early movie film at one time. You don't expect plastics to be modified by vibrations when they are not under stress. The concern for people who think tumbling loaded ammo is a bad idea is that they think the powder granules will break down into fine dust, changing the burning characteristics of the propellent. Several interested people have performed experiments with different cartridges, posted their findings on the internet, and there seems to be no cause to worry. I believe Geoff Beneze tumbled a few rounds for 2 weeks straight, and the propellant appeared to be unchanged. I do believe you could alter the physical structure of modern propellents in a tumbler, but the mechanics of it would require some sort of media that is harder than the powder and you would probably need a larger volumetric chamber than a cartridge case. So, in the end, tumbling to clean the ammo is OK.
__________________
_____________________________________________ Questions about 7.62 NATO and 308 Winchester? Click here. |
April 7, 2013, 07:56 AM | #8 |
Senior Member
Join Date: September 25, 2012
Location: Chester Va
Posts: 360
|
I ordered a Lyman vibrating type. This purchase could be the start of me reloading ammo again after a 30 year layoff.
|
April 9, 2013, 10:47 PM | #9 |
Senior Member
Join Date: February 20, 2000
Location: Colombia, SC
Posts: 745
|
Tumbling is fine, but I did notice a considerable change in some reloaded 22/250 that bounced around in my truck for more than 2 years hunting coyotes all over AZ.
__________________
I don't have time for busy people |
|
|