The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old July 6, 2010, 08:37 PM   #1
Tex S
Senior Member
 
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
Have you ever tried Iosso brass cleaner?

Does it work good? How long until the solution is no good and needs to be thrown out?
Tex S is offline  
Old July 6, 2010, 08:46 PM   #2
Mr Kris
Senior Member
 
Join Date: July 24, 2005
Location: USA
Posts: 111
I used it for a little while before I got a tumbler. It worked well on 44 magnum and 223 brass for removing external residue, and even the insides and primer pockets were actually pretty clean.

I did find that any brass I cleaned with the stuff would darken over time... I imagine rinsing longer, or with something to neutralize the chemical would fix that.

Can't comment on how long it lasts.... I got a tumbler not long after.
Mr Kris is offline  
Old July 8, 2010, 01:45 AM   #3
Tex S
Senior Member
 
Join Date: November 12, 2008
Location: Fort Worth, TEXAS
Posts: 909
Quote:
Can't comment on how long it lasts.... I got a tumbler not long after.
So your tumbler is better?
Tex S is offline  
Old July 8, 2010, 02:01 AM   #4
Darren007
Senior Member
 
Join Date: November 18, 2007
Location: Colorado
Posts: 1,053
I agree with Mr Kris. I used the Iosso brass cleaner for about 6 months. The cases came out fairly clean and shiny, however, I soon bought a tumbler and find the tumbler gives easier and better results.
Darren007 is offline  
Old July 8, 2010, 11:49 AM   #5
50 shooter
Senior Member
 
Join Date: August 6, 2002
Location: SoCal PRK
Posts: 986
The best thing about Iosso is that you can dip the brass, rinse it, dry it and be done loading before the stuff you put in the tumbler is done. On most brass it will give you a lightly shined appearance, if you want it blindingly shiny you'll need to finish it off in some corncob media with polish in your tumbler.

Other then that it's good stuff and it does a great job of getting surplus brass cleaned up faster then a tumbler can. On factory stuff it will keep the shine if you dip it in for no more then 1 minute. You can dry your brass in your oven, just be sure to use the "warm" setting only.

Be sure to wear gloves, the combination of the chemical reaction cleaning the brass will give your fingernails a light blue appearance. Don't ask me how I know this, just trust me on it.
__________________
I see the world thru bloodshot eyes
Streets filled with blood from distant lies
The dogs of war never compromise,
No time for rearranging.
50 shooter is offline  
Old July 8, 2010, 12:08 PM   #6
rrp
Senior Member
 
Join Date: February 18, 2006
Location: west central Wi
Posts: 300
I use it on old discolored brass to get the tarnish off. After that,I let it dry, and then tumble it to bring it to a nice shine. The brass is nice and clean after the Isso but it is dull.
rrp is offline  
Old July 9, 2010, 01:16 AM   #7
ballardw
Senior Member
 
Join Date: September 19, 2008
Posts: 1,415
I use this on heavily oxidized or discolored brass so I have a chance to see small cracks or splits. I found out that with some brown brass several hours in a tumbler yields shiny brown brass that was hard to tell if there were any splits.

Rinse well in hot water. Then do it again. Dry with heat gun or hair dryer. Small damp spots may turn green with amazing speed.
ballardw is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03392 seconds with 10 queries