February 2, 2017, 09:04 PM | #201 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
The chambers on my GP sample are oversized, but turns out my calipers are better at outside measurements than inside measurements.
I was getting .434+, which would be grossly oversized, and to be fair to Ruger had my gunsmith do his own measurements with better equipment today as a double-check. He got: 430.5" 430.5" 430.0" 427.0" 428.5" Not knowing at this point what Ruger considers standard, I also took along my first-run Lipsey's Blackhawk Flattop from when they first brought those out. He got: 428.5" 428.0" 428.5" 428.0" 428.5" 428.5 I'd conclude if Ruger'd take those GP throats down to 428.5 or 429, and make 'em consistent, the gun would be a more consistent shooter. The Blackhawk's not picky about bullet weights or diameters, and anything above 428.5 gets through with minor compression that doesn't seem to adversely affect accuracy. Many of the jacketed bullets I see are 429-430, and a lead bullet as high as 431 can still do well. Denis |
February 3, 2017, 02:40 PM | #202 |
Senior Member
Join Date: July 25, 2000
Location: Central TX
Posts: 1,503
|
Interesting. Thanks.
__________________
Cogito, ergo armatus sum. |
February 3, 2017, 04:24 PM | #203 |
Senior Member
Join Date: July 12, 2011
Location: Top of the Baltic stack
Posts: 6,079
|
Just found proof that Ruger listens to me!!
__________________
When the right to effective self-defence is denied, that right to self-defence which remains is essentially symbolic. Freedom: Please enjoy responsibly.
|
February 3, 2017, 04:50 PM | #204 |
Senior Member
Join Date: December 11, 2004
Location: Redwood City, Ca.
Posts: 4,114
|
About a decade ago John Taffin and Mike Venturino took up a petition and letter writing campaign to get Ruger to build a gun in 44 Spl. Bill Ruger said no. Ruger produced no 44 Spl. gun on his watch.
tipoc |
February 3, 2017, 08:52 PM | #205 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
Two years ago I pitched it & was told it couldn't be done as a GP.
Denis |
February 3, 2017, 09:00 PM | #206 |
Senior Member
Join Date: December 11, 2004
Location: Redwood City, Ca.
Posts: 4,114
|
Well someone was wrong, wern't they!
tipoc |
February 3, 2017, 10:03 PM | #207 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
We owe the Flattop .44 Spec to Jason Cloessner at Lipsey's.
That was a milestone & I've thanked him several times. I don't know who ramrodded the GP, but if Ruger can get the manufacturing end cleaned up on it, we'll owe SOMEBODY. Denis |
February 10, 2017, 04:55 PM | #208 |
Senior Member
Join Date: September 21, 2010
Location: az
Posts: 1,332
|
Haven't bought a pistol new in a long time but when I find one of these in store it might follow me home. Would love to find a used one but that may take awhile.
I think 41 mag would be a good offering as well
__________________
"When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy |
February 13, 2017, 03:43 PM | #209 |
Senior Member
Join Date: September 2, 2014
Location: Florida
Posts: 1,148
|
Looks like S&W has the Model 69 coming out in a 2.75 in barrel. I'd have to go with that over the gp100 .44 special for magnum capabilities. Granted Im not sure of .44 mag performance in a short barrel in general...
https://www.smith-wesson.com/firearm...-combat-magnum |
February 15, 2017, 11:06 AM | #210 |
Senior Member
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,869
|
I like the GP100 in .44 special but my gun budget took a beating at Christmas time. We'll see how the year shapes up but I imagine one of these appearing in my collection at some point.
A key selling point here is that it doesn't have an ugly hole drilled in the side of it, surrounded by little arrow marks. There has been significant argument over whether the S&W ILS is really a safety hazard but my gunsmith assures me that it is. He tells me that it's pretty rare but problems do occur. You can get the mechanism removed and the hole plugged but it still looks a little funky. It's a big part of why I buy Ruger revolvers these days. |
February 16, 2017, 04:05 PM | #211 |
Senior Member
Join Date: July 25, 2000
Location: Central TX
Posts: 1,503
|
I'm with Cosmodragoon. I'll look at a new Smith when the lock goes away. Until then, it's Ruger ... or pre-lock Smiths.
__________________
Cogito, ergo armatus sum. |
February 17, 2017, 07:08 AM | #212 |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Massad Ayoob authored an article in the March issue of Guns magazine titled "Big Bore Breakout", wherein he tested the Ruger Model GP 100, chambered in .44 Special. He reported that at a September writers' conference, the writers "...all asked (Ruger's representative, Brandon Trevino) the same question. Why?" To which Mr. Trevino "...gave the best possible answer: 'Because we had customers who wanted it.' "
Later in the article, Mr. Ayoob posed a logical question: "What, exactly, is the niche for a service-size revolver firing 5 rounds of .44 Special? After all, a 6-shot GP100 loaded full with 125-grain .357 ammo puts 3,498 ft-lbs. of energy at the tip of your trigger finger before you need a reload, while the 5-shot .44 Special with Critical Duty rounds tallies but 1,485...". I entertained the same bit of logic when I traded my neat, 5-shot, Smith & Wesson Model 696 revolver, chambered in .44 Special for a 7-shot, Smith Model 686 Plus, chambered in .357 Magnum (I did take a big hit on what the two revolvers are each worth now monetarily ). Though I still think I made the wiser decision in terms of trading for a handgun better suited for self-defense duties, Mr. Ayoob added, "The answer is, there are a lot of folks who don't buy energy as a determinant of 'stopping power' nor a supplier of confidence. Large-caliber bullets have been associated with downrange effectiveness for as long as there have been small arms and some folks are simply more confident with fewer larger bullets than an increased payload of smaller ones, regardless of velocity and energy. And recoil with this .44 Special load in the GP100 was lighter than with full power .357 Mag in my own (GP100)...". Interesting comparisons that will always be fodder for lively debate but destined to never result in a mutually agreeable resolution. Thankfully.
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
February 18, 2017, 01:47 AM | #213 |
Senior Member
Join Date: March 18, 2013
Location: Northeastern US
Posts: 1,869
|
In terms of putting damage downrange, .357 magnum and .44 special are both decent cartridges. They might do their damage in different ways but they both do it well enough for most applications where you might be carrying a GP100. These two are sort of a wash for me in terms of "stopping power".
Capacity seems to be the key argument for .357 magnum (or better yet, .327 Federal). On the "big and slow" side, your ears may take a slightly less horrific beating from the .44 special if you ever need it to save your life. Sweeter felt recoil is a good thing too. I'm just happy to live in a country where we have these kinds of choices. |
February 18, 2017, 09:30 PM | #214 | |
Senior Member
Join Date: July 25, 2000
Location: Central TX
Posts: 1,503
|
Quote:
__________________
Cogito, ergo armatus sum. |
|
February 19, 2017, 01:17 AM | #215 |
Senior Member
Join Date: April 16, 2011
Location: Georgia
Posts: 1,599
|
Y'all can fawn over this piece of feces, all you want...I will pass.
44 Special is my favorite cartridge...but I won't buy this brick. |
February 19, 2017, 06:08 AM | #216 |
Senior Member
Join Date: February 12, 2005
Location: North central Ohio
Posts: 7,486
|
Glad you got that off your chest...
__________________
ONLY AN ARMED PEOPLE CAN BE TRULY FREE ; ONLY AN UNARMED PEOPLE CAN EVER BE ENSLAVED ...Aristotle NRA Benefactor Life Member |
February 20, 2017, 01:03 AM | #217 | |
Senior Member
Join Date: December 10, 2005
Location: Central , OR
Posts: 1,888
|
Quote:
It's easier to make them bigger than smaller, if I were Ruger I'd shoot for .4295" and with a 3" barrel a 1:18 twist would likely do better with longer bullets. The cylinder throats of my Security Six .357 Mag measure .3575" and it shoots well with .358" cast and .357" jacketed. Last edited by joneb; February 20, 2017 at 02:02 AM. |
|
February 26, 2017, 11:22 AM | #218 |
Senior Member
Join Date: October 20, 2006
Posts: 687
|
all i can say fellas is i got to handle one of these rugers yesterday at a lgs,,,it felt good in the hand,, balanced very well for me and i new better than to touch it but i did and well,,,for me i would like to see it with fixed sights BUT i will be owning one,,,very shortly
thx ruger for listening to the minority crowd ocharry
__________________
The felon does not fear the police, and he fears neither judge nor jury. Therefore what he must be taught to fear is his victim." - Lt. Col. Jeff Cooper, USMC |
March 1, 2017, 10:29 AM | #219 |
Senior Member
Join Date: December 11, 2004
Location: Redwood City, Ca.
Posts: 4,114
|
I ran across this issue of American Handgunner from 1983. On page 48 there is an article about a custom Ruger police Service Six in 44 Spl. Makes for good reading.
There's also several good articles in there. A useful one on the trials that led to the adoption of the M9 in 1986. Gun mags were better back then. Page 48... http://americanhandgunner.com/1983issues/HMJ83.pdf tipoc |
March 3, 2017, 10:25 AM | #220 |
Senior Member
Join Date: July 25, 2000
Location: Central TX
Posts: 1,503
|
Got my GP100 back from Ruger yesterday. Invoice says, "Replaced barrel, cylinder, refinished. Repair, safety function check proof test and range test firing have been completed. Released for shipping."
There is still a slight gap under the front sight; two sheets of 20# paper will slide in, but not three. No longer highly noticeable. I'm fine with that. Best I can measure with my inside calipers, chamber throats are now .430. I tried three different style cast bullets, all sized .430. All three slipped into the throats and were held there by friction; easily passed through with minimal pressure. Again, I'm fine with that. I'm looking to get back to the range, hopefully this weekend! Have some 215 grain button-nosed wadcutters (mattsbullets.com) loaded up with Unique and Trail Boss. And as promised, here's a family pic with the fraternal twin .357.
__________________
Cogito, ergo armatus sum. Last edited by Legionnaire; March 3, 2017 at 12:12 PM. |
March 3, 2017, 11:25 AM | #221 | |
Junior member
Join Date: December 24, 2010
Posts: 508
|
Quote:
|
|
March 3, 2017, 12:12 PM | #222 | |
Senior Member
Join Date: October 25, 2004
Location: Vinita, OK
Posts: 2,552
|
Quote:
I don't see this GP in that way. It is either a fun range gun for people who love the nostalgia of .44 Special or an open carry working/range gun. I live on a 90 acre ranch and I could see making it a regular carry gun with the right holster and belt. My normal use of such a gun would normally end with one or two rounds fired. First revolver I ever bought for myself on my 21st birthday was a Ruger Security Six, six inch barrel, stainless. That would have been 1982. That's the gun which led me to learn reloading as well. I still keep it close by my side of the bed. But... as a general walking around utility gun, I've definitely moved away from .357 Magnum over the years. My first carry gun was a S&W M640 Centennial and it was a fine gun. But it is a total handful of blast and flash with the recommended 125 grain JHP Magnum load. I'm 55 years old now and been shooting guns my whole life. The older I get, the more I move towards bigger bullet and slower speeds. A .357 Magnum can be quite effective at many things but it gets to be a bit obnoxious over time. I can do just about everything I need to do around the property with 8.5 grains of Unique in .44 Special. And, as I said, five rounds/six rounds... makes no difference. If I have to put down a hurt goat, it's one shot to the head. Capacity isn't a big issue for a utility gun. I still love my unconverted OM Ruger Blackhawks and I carry all of them with five rounds loaded. I'm not a total old fart. My CCW finally changed a few years ago. After the Colorado movie theater attack. I decided I really did want longer range and higher tactical penetration in case the bad guy was wearing some type of vest. So I moved to an HK P2000 LEM in .357 SIG. I'm totally happy with it in 12+1. But I don't just walk around my property with it... that's usually either a .22 LR or a .44 Special. Gregg |
|
March 3, 2017, 09:23 PM | #223 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
Anyone that claims a .357 offers better on-target terminal ballistic performance is quite frankly, insane.
Guys I've said it before and I'll say it again: "There's no replacement for displacement" "When all things are equal, bigger bullets tend to work better" You can talk up the .357 magnum all you want, but it will NEVER be as capable or effective as the far larger and heavier .44 and .45 class slugs pushed at moderate velocities. |
March 3, 2017, 10:07 PM | #224 | |
Senior Member
Join Date: January 3, 2017
Posts: 1,583
|
Quote:
I am fond of "bigger bullets" too but bullet weight or diameter by itself is no more "magic" than the hyper-speed light bullets. I did a lot of research when I decided to try my hand at hunters pistol silhouette and found two things of importance for me. 1. it is easier for me to hit a target when I have to hold under than if I have to hold over. 2. velocity can overcome weight if the bullet is properly chosen. I chose the 140 grain JHP over the 158 grain bullet because I could easily adjust the round to hit at 100 yards and hold under at 50 and 75 for solid hits. The hollow point bullet transferred more momentum to the target because it took time to deform before the heat built up enough to destroy it. This was proven to me by the perfect imprint left from the hollow point in the chickens at 25 yards. I made my choices based on what some of the experts in the competition were reporting and the fact that I did not want to have to adjust my sights between banks. OK, that's fine for silhouette but what about self defense or hunting? As it turned out the round was as good in these areas as it was in silhouette but for different reasons. The 140 grain bullet is the best compromise between velocity and the brute force of the 158 grain bullet. You see the 357 gives up a lot of velocity going from 140 to 158 due to the added weight and length. The weight is obvious but the length hits twice. There is less space left in the case and more drag in the bore. You don't have a lot of extra space for H110 with a 140 grain bullet so the next slower powder loses velocity and with the 158 grain bullet that 16.6 grain maximum charge (old data please check your manuals) was as close to a compressed load as you want to get with a double base powder. There just is no longer enough powder space to get the job done properly. As it turns out you can cleanly kill a deer at 50 yards with a 140 grain 357 round. I could have pushed it to 75 but I tend to be conservative when shooting at game. After seeing the effect of the 357 going through the chest of a deer I knew that it was as good for self defense as I could ask for. |
|
March 3, 2017, 10:33 PM | #225 |
Member Emeritus
Join Date: August 19, 2004
Posts: 7,133
|
Picked up my replacement GP today, the throats were measured by my gunsmith at:
.4295 .4295 .430 .430 .430 MUCH better than the first sample. I'd say Ruger's on it. Denis |
|
|