October 13, 2009, 11:14 AM | #1 |
Senior Member
Join Date: July 7, 2009
Location: Texas
Posts: 1,246
|
SAAMI specs
I can't seem to find what the SAAMI specs are for the 44 Mag. Was told to go to saami.org, but it seems to only give dimensions. Trying to find out what ammo is acceptable to shoot, and if I need to reload. Want the most powerful (within reason) HC loads for hogs, but it seems the ones I find are +P or are like -P. Need good hog loads. Thanks.
|
October 13, 2009, 11:36 AM | #2 |
Senior Member
Join Date: July 5, 2009
Posts: 869
|
I do reload for my S&W 44 mag, though I don't go near the top end. I just don't like the recoil. I have attached some links that may be helpful.
http://www.handgunsmag.com/ammunitio...005/index.html http://www.reloadammo.com/44loads.htm http://www.reloadbench.com/cartridges/p44m.html http://www.handgunsmag.com/ammunition/44mag_081005/ |
October 13, 2009, 12:42 PM | #3 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
http://www.lasc.us/SAAMIMaxPressure.htm
Just remember that loading manuals were developed to address the issue you are talking about. And if you want more, you may need to step up to another gun.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
October 14, 2009, 12:46 AM | #4 |
Senior Member
Join Date: May 18, 2004
Posts: 308
|
|
October 14, 2009, 06:40 AM | #5 |
Senior Member
Join Date: November 8, 2007
Posts: 2,001
|
45Colt,
Thank youu for the SAAMI Centerfire Pistol Standard PDF. Does anybody have the newer peizoelectic pressure measurement version? SL1 |
October 14, 2009, 07:21 AM | #6 |
Senior Member
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 9,333
|
SL1... a list of all their publications here...
http://www.saami.org/Publications/ I didn't see what you were looking for, but didn't dig too deep...
__________________
In life you either make dust or eat dust... |
October 14, 2009, 12:14 PM | #7 |
Senior Member
Join Date: July 7, 2009
Location: Texas
Posts: 1,246
|
Thanks guys
|
October 14, 2009, 01:17 PM | #8 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
SAAMI Piezo transducer spec is 36,000 PSI. CIP Piezo transducer spec is 41,000 PSI. The SAAMI copper crusher spec was 40,000 cup. SAAMI lowered the peak pressure when they changed over from CUP to PSI.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
|
|