|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 26, 2024, 01:31 AM | #1 |
Senior Member
Join Date: January 25, 2001
Posts: 453
|
New 9mm: CZ 75 P01, Beretta Px4 Full Size, or Springfield EMP?
I have finally started making it to the range spot COVID, and right now I have an FN FiveSeven Mark II and and Armalite AR-24C - a Sarsilmaz Tangfolio CZ 75 clone that Armalite imported in the early 2000s.
I think that I have decided to sell the FiveSeven - ammo is just too dang expensive - even post COVID buying bulk is $0.50/round. It also has not been super reliable. I expect that I will get $650 - $750 for the FiveSeven, 5 20 round mags and a Kramer leather OWB hoslter/dual mag pouch. Mayne that is optimistic. If I do, I think that I will get another 9mm. I really like the way the Armalite AR-24C (in this case, the C is for "tactical", the compact model was a "K") sits in my hand - but no parts are available. I recently tried to get a fiber optic front site and no one has one that will fit. I also get a bit of trigger sting from the Armalite AR-24 when I fire it in DA mode. Last week at the range, I rented a Baretta PX4 Compact, and I liked shooting that pretty much. I certainly shot it as well as I shoot the AR-24. I also plan to rent a Springfield EMP before I make a decision. I rented a 1911 in 45 years ago, and was underwhelmed. I had expected to really like a 1911, but I think that a high end 1911 - maybe after a bunch of tinkering - can be an incredible gun - but the one I rented was not. My uses for the gun will be mostly home defense and range shooting. The only time/place I can imagine carrying would be at synagogue each week - where it would be concealed, but not deep concealment. I could see an OWB holster under a suit jacket would be fine. I don't care if my friends at shul know that I am carrying. Open carry is legal in my state, and I would get a CCW if it came to that. So I think size/weigth does not matter all that much - I don't see myself carrying every day - or to places where I don't know almost everyone by sight. Part of me says, go with a CZ 75 P01 more or less as an updated AR-24 that i can actually get parts and accessories for, part of me says go for thoroughly modern gun like the polymer rotary action PX4, and I held a Springfield EMP as the rental counter last week, and was surprised how slim it was and how good it felt in my hand. What do people think the trade offs are between these pistols? I realize these three are all very different, so I have not been able to find many comparison YouTube videos or articles.
__________________
PCV Yemen 84-86 Past results are no guarantee of future performance. |
March 26, 2024, 04:28 AM | #2 |
Senior Member
Join Date: October 20, 2012
Location: NC
Posts: 947
|
For me, of the choices you mention, the CZ P-01 would be a no-brainer, but I’m not sure why you get “trigger sting”.
The PX4 has a reputation as a soft shooter, but I can’t get past the safety that works opposite what I am used to. I wouldn’t want to complicate things further, but you may also want to consider the CZ P07 and the Heckler Koch P30. |
March 26, 2024, 05:40 AM | #3 |
Senior Member
Join Date: May 16, 2012
Location: ME
Posts: 772
|
|
March 26, 2024, 06:11 AM | #4 |
Senior Member
Join Date: April 28, 2013
Posts: 3,182
|
I can’t offer a comparison but you can’t go wrong with a CZ.
|
March 26, 2024, 12:55 PM | #5 |
Member
Join Date: January 28, 2024
Posts: 93
|
My only issue with a CZ is that the slide is too small to grab. Because of this, I'm unable to chamber a bullet into the barrel consistently 100% of the time, unless I set the slide stop button first and then release the button quickly. If I do it slowly without engaging the slide stop, it will jam 100% of the time. I think this chamber's mechanism can be improved. It should not get stuck so easily.
|
March 26, 2024, 01:07 PM | #6 |
Senior Member
Join Date: May 22, 2011
Posts: 3,629
|
Haha, you're kinda picking up the odd balls.
__________________
My wife is a pulmonologist (respiratory Dr) and epidemiologist. If you have any questions on COVID, please reach out to me in PM. |
March 26, 2024, 01:11 PM | #7 | |
Senior Member
Join Date: October 23, 2005
Location: US
Posts: 3,657
|
Quote:
OP, it's hard to go wrong with the Beretta or the CZ. Admittedly, you do have a CZ clone so that box is kinda already checked (halfway, sorta). I never cared much for the PX4, but don't doubt it's a fabulous pistol. I am also a fan of 1911s, and Springfields are usually serviceable enough in quality. I dunno, shooters choice. If any of those pistols did manage to be finicky, it would most likely be the 1911 (though I believe everyone should own at least one, and they are generally very reliable). Food for thought though.
__________________
Support the NRA-ILA Auction, ends 03/09/2018 https://thefiringline.com/forums/sho...d.php?t=593946 Last edited by 5whiskey; March 26, 2024 at 01:16 PM. |
|
March 26, 2024, 01:33 PM | #8 |
Member
Join Date: January 28, 2024
Posts: 93
|
"But letting the slide go like a slingshot (or pressing the slide release lever while it is locked to the rear) is the correct way to load."
Unfortunately, even by doing so, my P-01 will get stuck 25% of the time. Not sure if it is due to the snap caps (like the real bullets with brass sleeves and the same weight) I'm using, but the bullets can get stuck in a way, no matter how much force the spring has, it won't chamber the bullet correctly. |
March 26, 2024, 01:35 PM | #9 |
Senior Member
Join Date: May 22, 2011
Posts: 3,629
|
Plunk test your rounds on the P01 and see what you have.
RSA is next up.
__________________
My wife is a pulmonologist (respiratory Dr) and epidemiologist. If you have any questions on COVID, please reach out to me in PM. Last edited by wild cat mccane; March 26, 2024 at 01:43 PM. |
March 26, 2024, 02:19 PM | #10 | |
Senior Member
Join Date: October 23, 2005
Location: US
Posts: 3,657
|
Quote:
__________________
Support the NRA-ILA Auction, ends 03/09/2018 https://thefiringline.com/forums/sho...d.php?t=593946 |
|
March 26, 2024, 02:35 PM | #11 | |
Senior Member
Join Date: January 25, 2001
Posts: 453
|
Quote:
__________________
PCV Yemen 84-86 Past results are no guarantee of future performance. |
|
March 26, 2024, 05:02 PM | #12 | |
Senior Member
Join Date: October 20, 2012
Location: NC
Posts: 947
|
Quote:
|
|
March 26, 2024, 05:23 PM | #13 |
Senior Member
Join Date: May 22, 2011
Posts: 3,629
|
Might you be looking for suggestions? Are you looking for something specific?
For example, CZ in the non comp oriented SP01+ versions have awful triggers, possibly the worst. If you like hammered fired compact, the Sig P229 has one of the best triggers you can get. It's a few hundred more than the P01, but well worth it. That hundreds extra includes night sights. So a "Nitron" P229 with contrast sights is even closer to a P01. While the P01 would make you think on paper it's not snappy, I find mine is very snappy.
__________________
My wife is a pulmonologist (respiratory Dr) and epidemiologist. If you have any questions on COVID, please reach out to me in PM. |
March 26, 2024, 05:32 PM | #14 |
Senior Member
Join Date: May 22, 2011
Posts: 3,629
|
Others can correct me, but the EMP is on a frame of it's own. So tinkering is limited.
Not the route to go given your tinker comment. EMP kinda peaked when there was limited 9mm small gun options.
__________________
My wife is a pulmonologist (respiratory Dr) and epidemiologist. If you have any questions on COVID, please reach out to me in PM. |
March 26, 2024, 05:55 PM | #15 | |
Senior Member
Join Date: January 25, 2001
Posts: 453
|
Quote:
Interesting - my AR 24C has a long and occasionally gritty DA pull, but the SA is very short and smooth. I have assumed that’s true of the CZ design in general. I am not sure when I would ever use the DA pull - w/o decockers, the only way to get into DA is dropping the hammer on a live round. That seems like procedure looking for an error. Sent from my iPhone using Tapatalk |
|
March 26, 2024, 07:36 PM | #16 |
Member
Join Date: January 28, 2024
Posts: 93
|
Not really. It can still get stuck sometimes. It seems like the journey for the bullet to travel from the magazine to the barrel is a very treacherous one. It is not just about the spring force, which I think mine has plenty.
Last edited by liv4spd; March 27, 2024 at 04:03 AM. |
March 27, 2024, 12:04 AM | #17 |
Senior Member
Join Date: May 22, 2011
Posts: 3,629
|
Plunk test. Cz throat issue?
__________________
My wife is a pulmonologist (respiratory Dr) and epidemiologist. If you have any questions on COVID, please reach out to me in PM. |
March 27, 2024, 05:20 AM | #18 | |
Senior Member
Join Date: April 28, 2013
Posts: 3,182
|
Quote:
|
|
|
|