|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
View Poll Results: So which is the exact milimeter for a .338 Lapua Magnum? | |||
8.58x70mm | 10 | 90.91% | |
8.58x71mm | 1 | 9.09% | |
Voters: 11. You may not vote on this poll |
|
Thread Tools | Search this Thread |
July 3, 2011, 01:14 PM | #1 |
Senior Member
Join Date: January 1, 2011
Location: Louisville
Posts: 261
|
.338 Lapua Magnum?
Ok here is something I have wanted to know for a while. I Know That a .338LM is 8.58mm (8.6). But what gets me is it by 70 or 71. What is the exact milimeter of a .338 Lapua Magnum? So which one is it 8.58x70mm or 8.58x71mm?
|
July 3, 2011, 01:20 PM | #2 |
Senior Member
Join Date: April 26, 2010
Location: Yellowstone Co, MT
Posts: 489
|
The 8.58 is the diameter of the projectile, the 70mm is the case length. just like the 7x57, 6.5x55 ect.
|
July 3, 2011, 02:03 PM | #3 |
Senior Member
Join Date: January 1, 2011
Location: Louisville
Posts: 261
|
yeah i know... I want to know the official case diameter. some say it is 70, others say it is 71.
|
July 3, 2011, 02:18 PM | #4 |
Senior Member
Join Date: November 24, 2010
Location: Spring, TX
Posts: 1,552
|
It is x70.
|
July 3, 2011, 03:58 PM | #5 |
Senior Member
Join Date: April 26, 2010
Location: Yellowstone Co, MT
Posts: 489
|
According to RCBS.load software the case diameter of 338 Lapua is 14.93 mm at the rim. 14.90mm at the base, and 13.81mm at the shoulder. The 70mm refers to case length not diameter.
|
July 4, 2011, 12:11 AM | #6 |
Senior Member
Join Date: January 1, 2011
Location: Louisville
Posts: 261
|
Ok thanks and I know. You all keep on telling me facts I already knew. I was just wondering how long the case was, thats all.
|
July 4, 2011, 02:08 AM | #7 | ||
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Quote:
Quote:
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
||
July 4, 2011, 01:04 PM | #8 |
Senior Member
Join Date: January 1, 2011
Location: Louisville
Posts: 261
|
You should stop being a smart aleck. I know the 8.58mm is the projectile width and that "70 or 71" is the case legth. My question was NOT what is the 70 measure. I asked is it "70 or 71"mm long. All people had to say was or vote was "70" or "71". But now i now it it 70mm.
|
July 5, 2011, 07:49 AM | #9 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Apparently there are some reading comprehension issues. The OP made it very clear the question is case length, 70 or 71mm. The OP later mistyped this "I want to know the official case diameter" He intended length.
Quote:
The .338 Lapua Magnum=(8.6x70mm or 8.58x70mm) it's based on the .416 Rigby. Last edited by madcratebuilder; July 5, 2011 at 07:55 AM. |
|
July 5, 2011, 03:55 PM | #10 |
Senior Member
Join Date: January 1, 2011
Location: Louisville
Posts: 261
|
Thank You Madcratebuilder for understanding the question from the first post.
|
July 5, 2011, 04:05 PM | #11 |
Senior Member
Join Date: September 8, 2007
Location: DFW, Texas
Posts: 2,475
|
sheesh, tough crowd...
I think we all know that by asking 70mm or 71mm, he was not referring to diameter, but asking about length of the case. 70mm diameter is cannon (tank/howitzer) territory...
__________________
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776 |
July 5, 2011, 04:19 PM | #12 |
Senior Member
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,505
|
I would jump on the pile, but I understood his question perfectly
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain |
July 5, 2011, 05:31 PM | #13 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Lapua lists it as 8.6 x 70.
__________________
Spelling and grammar count! |
July 6, 2011, 10:25 AM | #14 |
Senior Member
Join Date: May 27, 2009
Posts: 3,968
|
Why did the OP make it an opinion poll?
(I didn't really think case length for a particular cartridge was subjective.) Regardless, the answer is 70mm.
__________________
Sic Semper Tyrannis |
Tags |
.338 , .338 lapua magnum , .338lp , lapua , magnum |
|
|