Richards Micro Fit Stocks

CroceF · July 12, 2015, 12:27 PM

Has anyone ever purchased a stock from Richards Micro Fit? What did you buy and were you pleased with it? Your answers are appreciated. Thanks

hoghunting · July 12, 2015, 01:09 PM

I bought a semi-inletted laminated stock from Richards and it needed a lot of inletting to fit. I pillar bedded and glass bedded the action and the stock finished up extremely nice. Would much rather have more wood to remove instead of having to use wood filler because too much wood was cut away.

The stock took quite a bit of time and work to fit and finish, but it came out exactly as I wanted. Would buy from them again as it was a very good product.

Welcome to the forum.

**JohnKSa** · July 12, 2015, 01:14 PM

I was not pleased with the quality of the one I purchased, nor was I satisfied that the way it was described in the advertisement was accurate.

When they have been discussed in previous threads it seems that others, perhaps with more realistic expectations based on the prices charged, seem to be less dissatisfied than I.

skizzums · July 12, 2015, 02:12 PM

here is a recent thread discussing them
http://thefiringline.com/forums/show...light=microfit

July 12, 2015, 12:27 PM	#1
CroceF Junior Member Join Date: July 20, 2014 Posts: 1	Richards Micro Fit Stocks Has anyone ever purchased a stock from Richards Micro Fit? What did you buy and were you pleased with it? Your answers are appreciated. Thanks

July 12, 2015, 01:14 PM	#3
JohnKSa Staff Join Date: February 12, 2001 Location: DFW Area Posts: 25,003	I was not pleased with the quality of the one I purchased, nor was I satisfied that the way it was described in the advertisement was accurate. When they have been discussed in previous threads it seems that others, perhaps with more realistic expectations based on the prices charged, seem to be less dissatisfied than I. __________________ Do you know about the TEXAS State Rifle Association?

July 12, 2015, 02:12 PM	#4
skizzums Senior Member Join Date: July 1, 2013 Location: Douglasville, Ga Posts: 4,615	here is a recent thread discussing them http://thefiringline.com/forums/show...light=microfit __________________ My head is bloody, but unbowed

July 12, 2015, 01:09 PM	#2
hoghunting Senior Member Join Date: March 27, 2006 Posts: 1,559	I bought a semi-inletted laminated stock from Richards and it needed a lot of inletting to fit. I pillar bedded and glass bedded the action and the stock finished up extremely nice. Would much rather have more wood to remove instead of having to use wood filler because too much wood was cut away. The stock took quite a bit of time and work to fit and finish, but it came out exactly as I wanted. Would buy from them again as it was a very good product. Welcome to the forum.