December 13, 2019, 07:55 PM | #1 |
Senior Member
Join Date: September 11, 2005
Posts: 1,023
|
Guns you wish existed.
I would really like a Colt 1908 in 9mm with a decocker, boy that would really make my Sam Spade day.
Here's looking at you kid.
__________________
Courage is what it takes to stand up and speak out, Courage is also what it takes to sit down and listen, Winston Churchill. |
December 13, 2019, 08:06 PM | #2 |
Senior Member
Join Date: January 12, 2008
Location: Tennessee
Posts: 1,599
|
A revolver the same size as a Colt Detective Special, in blued steel, in an 8 shot .22 magnum version.
__________________
Say when..... |
December 13, 2019, 08:20 PM | #3 |
Senior Member
Join Date: September 11, 2005
Posts: 1,023
|
I'd be happy if they just brought back the Colt Detective Special.
__________________
Courage is what it takes to stand up and speak out, Courage is also what it takes to sit down and listen, Winston Churchill. |
December 13, 2019, 08:26 PM | #4 |
Senior Member
Join Date: June 30, 2017
Location: Columbia Basin Washington
Posts: 415
|
I would love to see a Colt New Service, old style like 1930s models.
Throw in a retro target version. |
December 13, 2019, 08:55 PM | #5 |
Senior Member
Join Date: November 17, 2009
Location: Back in a Non-Free State
Posts: 3,133
|
10 shot revolver in 327 Federal Magnum.
__________________
Simple as ABC . . . Always Be Carrying |
December 13, 2019, 10:07 PM | #6 |
Senior Member
Join Date: September 7, 2009
Location: N. Dakota
Posts: 435
|
A modern, plastic, double stacked mag, striker fired pistol in 7.62x25.
__________________
We've all heard that a million monkeys banging on a million typewriters will eventually reproduce the entire works of Shakespeare. Now, thanks to the Internet, we know this is not true. |
December 13, 2019, 10:48 PM | #7 |
Senior Member
Join Date: April 3, 2010
Location: Texas
Posts: 1,394
|
I wish I had bought the 12/22 revolver by USFA. Loved the look of this revolver but was always moving around overseas for years and by the time I was going to get US firearms was no longer around. I forgot I would love a Mateba 6 Unica semi-auto revolver in .357.
__________________
ONLY TWO DEFINING FORCES HAVE GIVEN UP THEIR LIVES FOR YOU. ONE IS JESUS CHRIST FOR YOUR SOUL AND THE OTHER IS THE AMERICAN SOLDIER FOR YOUR FREEDOM. Last edited by ms6852; December 14, 2019 at 02:51 AM. |
December 14, 2019, 01:39 AM | #8 |
Senior Member
Join Date: December 2, 2007
Location: Missouri
Posts: 8,306
|
A reasonably priced DA/SA 22 rimfire revolver.
i.e. Rock Island Armory 200/206 in 22 rimfire.
__________________
Cheapshooter's rules of gun ownership #1: NEVER SELL OR TRADE ANYTHING! |
December 14, 2019, 03:04 AM | #9 |
Senior Member
Join Date: February 27, 2009
Posts: 406
|
A Beretta 92 in .45 ACP.
Rmocarsky |
December 14, 2019, 04:54 AM | #10 |
Senior Member
Join Date: October 9, 1998
Location: Ohio USA
Posts: 8,563
|
I wished for a K frame S&W sized .44 magnum snub nose & *poof* it was granted!
It matters little that the K frame is an L frame - the grip is the same. So - moral of the story is - all you wishers keep wishing & some day it may come true for you! |
December 14, 2019, 05:08 AM | #11 |
Senior Member
Join Date: October 22, 2016
Posts: 3,888
|
Ruger Mark in .32 ACP
Ruger Model 44 carbine, but in .327, .357, .44, and .45 Colt with two full length tubular magazines similar to the KSG. It's just a semi automatic rifle that holds 15 rounds of rimmed revolver ammo tickles my fancy.
__________________
"We always think there's gonna be more time... then it runs out."
|
December 14, 2019, 06:11 AM | #12 |
Senior Member
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 665
|
Modern PCC in 7.62X25 Tokarev, with 75 round drum.
Polymer frame 1911 double stack in 9X25 Dillon. CZ P07 in 7.62X25 Tokarev.
__________________
The soldier's pack is not so heavy a burden as the prisoner's chains. Dwight Eisenhower It is very important what a man stands for. But it is far more important what a man refuses to stand for. |
December 14, 2019, 07:29 AM | #13 |
Senior Member
Join Date: June 2, 2006
Location: Bowling Green Virginia
Posts: 4,487
|
An HK model the size of a Kahr P9. In other words, a Kahr that works without a doubt. While we're at it, add a optic slide cut to the slide aka the Hellcat. My dream HK.
|
December 14, 2019, 07:57 AM | #14 |
Senior Member
Join Date: October 23, 2018
Location: Republic of Boulder, USA
Posts: 1,475
|
A Glock the same size as a Glock 19 but less expensive and chambered in 22LR
...........oh wait a minute
__________________
PhormerPhantomPhlyer "Tools not Trophies” |
December 14, 2019, 09:56 AM | #15 | |
Staff
Join Date: June 8, 2008
Posts: 4,022
|
Quote:
Since detectives do not customarily carry revolvers these days, they call it a Cobra, but it is all steel. |
|
December 14, 2019, 10:13 AM | #16 |
Senior Member
Join Date: March 12, 2011
Location: Washington state
Posts: 1,558
|
I would love a large frame revolver chambered in something along the lines of a 500 S&W necked down to .44 caliber. And maybe one necked down to .357, so I can compare and pick the one that makes me smile the most.
__________________
You can't fix stupid....however ignorance can be cured through education! |
December 14, 2019, 01:34 PM | #17 |
Senior Member
Join Date: April 28, 2013
Posts: 3,176
|
A 3" GP100 that holds 7 rounds of .327 mag. That would be my new carry gun for sure.
|
December 14, 2019, 03:24 PM | #18 |
Senior Member
Join Date: November 18, 2001
Location: Over the hills and far, far away
Posts: 3,206
|
6 shot 327 Magnum 2" barrel stainless steel frame S&W Bodyguard (shrouded hammer) J-frame. A Centennial in same configuration would also be acceptable.
__________________
- Homeland Security begins at home: Support your Second Amendment - www.gunowners.org - www.saf.org - act.nraila.org - www.grnc.org |
December 14, 2019, 03:57 PM | #19 |
Senior Member
Join Date: May 18, 2015
Location: PA
Posts: 1,835
|
FN should start producing the Browning Hi Power again. The line to buy one forms behind me!
__________________
Words to Live By: Before You Pray - Believe; Before You Speak - Listen; Before You Spend - Earn; Before You Write - Think; Before You Quit - Try; Before You Die - Live |
December 14, 2019, 03:59 PM | #20 |
Senior Member
Join Date: December 5, 2010
Location: Miami, Florida
Posts: 6,429
|
HK P30L striker-fired.
Don't you dare say "VP9"! |
December 14, 2019, 04:07 PM | #21 |
member
Join Date: June 12, 2000
Location: Texas and Oklahoma area
Posts: 8,462
|
A double-stack 9mm 1911 with a 4” barrel and reliable magazines at less than $1,000.
|
December 14, 2019, 05:28 PM | #22 |
Senior Member
Join Date: January 24, 2014
Posts: 577
|
How about an accurately reproduced version of the Smith&Wesson Triple Lock revolver in 44 Special. That revolver after a reintroduction of the Smith&Wesson N frame 38/44 Outdoorsman.
__________________
Intentionally Antagonizing Another MemberInsults and Ad Hominems |
December 14, 2019, 08:31 PM | #23 |
Member
Join Date: July 3, 2012
Posts: 89
|
Ruger GP100 in 45colt
|
December 14, 2019, 09:02 PM | #24 |
Senior Member
Join Date: July 20, 2017
Posts: 316
|
KGP141 in .45acp
Sent from my iPhone using Tapatalk |
December 14, 2019, 09:42 PM | #25 |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,160
|
I would like to see a modern Colt 1877 replica- but redesigned in the guts to prevent breakage and short life.
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
|
|