February 20, 2017, 08:33 PM | #1 |
Senior Member
Join Date: April 12, 2009
Posts: 741
|
data
Can someone with QL look up some data? rifle is a sako model 75 in 300 win mag with a 24" barrel. Winchester case, federal 215 primer, nosler 190gn accubond, reloader 23 powder. Thank you.
|
February 21, 2017, 04:00 AM | #2 |
Member
Join Date: June 6, 2015
Location: Oregon
Posts: 82
|
ABLR fun facts:
They run slippery through the bore so you can almost always get some extra speed out of them if you do it carefully. H100 with the 190s is a great combo in a 300 wm. They usually don't like a new barrel or one with a sharp leade, they are very soft and deform easily. They usually work really well in a half worn barrel or something with more of a progressive engraving. Sorry no ql or rl 23 but the ab and ABLR are all I shoot in my hunting rifles. Sent from my SM-N920V using Tapatalk |
February 21, 2017, 05:23 AM | #3 |
Senior Member
Join Date: June 11, 2007
Posts: 2,155
|
You might try Nosler forum, they give you QL for R-23 and read your post about current load using 190gr ABLR.
__________________
Semper Fi Vietnam 1965 VFW Life member NRA Life Member |
February 28, 2017, 06:53 PM | #4 |
Senior Member
Join Date: April 12, 2009
Posts: 741
|
I worked close to rl22 data. At 74 gn it got high pressure signs. I settled on 72.4gn cuase it shoots 1/2" groups. It is a clean burning powder.
|
March 1, 2017, 05:13 AM | #5 |
Senior Member
Join Date: June 11, 2007
Posts: 2,155
|
__________________
Semper Fi Vietnam 1965 VFW Life member NRA Life Member |
March 1, 2017, 05:52 AM | #6 |
Senior Member
Join Date: April 12, 2009
Posts: 741
|
data
oldroper I called alliant and they said don't use sierra data or hornady. The new hornady manuel has data for rl23 and a 190gn bullet with a max load of 72.6. So it worked out within the hornady data.
|
March 1, 2017, 09:55 AM | #7 |
Senior Member
Join Date: June 11, 2007
Posts: 2,155
|
sako2, Dump me, I have their new manual and I didn't look but what is interesting they use 25" barrel. Since you have use it, how is the load density?
__________________
Semper Fi Vietnam 1965 VFW Life member NRA Life Member |
March 1, 2017, 06:23 PM | #8 |
Senior Member
Join Date: April 12, 2009
Posts: 741
|
Didn't figure the load density out. But looking at the powder in the case I would say it's around 90%.
|
|
|