|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 20, 2007, 07:56 AM | #1 |
Senior Member
Join Date: February 17, 2005
Location: Wisconsin
Posts: 499
|
Pitting inside barrel, repair or live with?
I bought a rifle recently for a very good price. When I inspected the barrel (land and grooves) I noticed either some rust or pitting or both. I purchased the rifle anyway. When I got home I tried to remove the rust ( I was hoping it was just rust) with a cooper brush and solvent, it removed the rust but I think there some pitting going on. Not a big area, maybe 1/2 inch of small round pit marks. Any chance of smoothing them down, or just live with the pitting?
|
March 20, 2007, 08:00 AM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,845
|
Try shooting it first before you do anything else. A pitted barrel still has potential to shoot well. Overscrubbing can ruin a barrel. If nothing else, you can either rebarrel it or have it relined by Bobby Hoyt of Der Freischutz Shoppe.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
March 20, 2007, 01:49 PM | #3 |
Senior Member
Join Date: May 4, 2001
Posts: 7,478
|
A good first step is to buy a jar of JB Bore Paste and use it to give the bore a good cleaning.
This will totally clean ALL fouling and rust out of the bore. http://www.brownells.com/aspx/NS/sto...ANING+COMPOUND Once the bore is really clean you can see what you've got. If the bore is pitted, there's absolutely nothing you can do to "fix" the pitting. Pitting is just that: tiny holes rusted into the metal, and there's no way to "remove" or "fill" the holes. This does not mean the barrel is no good, or that it won't shoot good groups. |
March 20, 2007, 03:05 PM | #4 |
Senior Member
Join Date: February 17, 2005
Location: Wisconsin
Posts: 499
|
Thanks for the info
|
March 20, 2007, 10:46 PM | #5 |
Senior Member
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
|
Dfariswheel has hit it dead on
|
March 21, 2007, 08:59 AM | #6 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
These guys have it right. I will only add that you want to be sure all traces of the old rust are really gone, otherwise they will gradually eat the pits down deeper. I would plug the bore and fill it with Kroil or Gunzilla and let it soak 24 hours, then brush it out again.
The JB bore compound is a mildly abrasive cleaner that will polish the bore. There are others, if the JB isn't available where you are. Iosso Bore Cleaner is one I like that I've occassionally seen at Gander Mountain. Remington 40X is another, though slowest acting (most mild) of the group.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
March 22, 2007, 12:17 PM | #7 |
Senior Member
Join Date: February 17, 2005
Location: Wisconsin
Posts: 499
|
Used the JB did a great job cleaning , but the barrel is pitted.
|
March 22, 2007, 12:44 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Maybe it is because I have seen so many really bad bores, but I don't think you have much of a problem with that small area of pitting. The rifle should shoot fine.
Jim |
March 27, 2007, 02:03 PM | #9 |
Senior Member
Join Date: March 1, 2000
Location: Boise, ID
Posts: 8,518
|
My '03 Springfield is pitted from one end to the other, and will still shoot 3" groups at 100 yards.
|
March 27, 2007, 02:16 PM | #10 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,390
|
A few years ago a friend of mine got an M 1 Garand. Nice one, he was very proud, but he was very concerned and wondering if he should replace the barrel because of "the one really bad pit near the muzzle."
Uh, Bob? You need that pit. That's your gas port...
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
March 27, 2007, 02:53 PM | #11 |
Senior Member
Join Date: June 23, 2004
Location: Ohio
Posts: 5,676
|
I would think deep pits on the lands would effect it more than the pitting you sometimes see in the grooves, but like they said it may shoot well with jacketed bullets, the pitted area may foul worse though. If there is a good crown on the barrel and the pitting is not right at the muzzle that helps too.
|
March 27, 2007, 03:34 PM | #12 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,063
|
As long as the pits aren't part of the throat or the edge of the muzzle, and are shorter than the bearing length of your bullets, the bullets will mostly just skate over them. Especially if they are nearer the muzzle end, since obturating pressure is lower there.
Nick
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
April 2, 2007, 01:25 PM | #13 |
Junior Member
Join Date: October 11, 2006
Posts: 14
|
What about this stuff? Down towards the bottom of the page they have some for firearms.
http://www.xado-us.com/products.html Looking at reconditioning my SKS barrel.
__________________
Walther P22 - Steyr M9 - Yugo SKS - K98 Mauser - Ruger 10/22 |
|
|