|
|
|||||||
| Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
| Register | FAQ | Calendar | Today's Posts | Search |
 |
|
|
Thread Tools | Search this Thread |
March 23, 2016, 06:50 PM
|
#1 |
|
Member
Join Date: December 28, 2014
Posts: 63
|
Hornady bad shell plate?
I have a hornady lnl ap press. Just put on my #6 shell plate and it jams up when indexing ..same spot each time. My other 2 plates are perfectly fine. Anyone ever see this?
|
|
|
March 23, 2016, 07:22 PM
|
#2 |
|
Senior Member
Join Date: February 20, 2015
Location: Brandon Fl
Posts: 237
|
Send it back to Hornady they will replace it.
Thewelshm |
|
|
|
March 23, 2016, 07:41 PM
|
#3 |
|
Member
Join Date: December 28, 2014
Posts: 63
|
I'm thinking the groove on the back is undersized. Looks OK with cailpers. If I get a chance at work I'm going to put them on a manual cmm and inspect them
|
|
|
|
March 24, 2016, 12:42 PM
|
#4 |
|
Senior Member
Join Date: February 17, 2009
Posts: 1,089
|
place it flat on a piece of flat glass and see if there is any high spots.
|
|
|
|
March 24, 2016, 05:21 PM
|
#5 |
|
Senior Member
Join Date: June 9, 2010
Location: NEPA
Posts: 909
|
Also note that they changed the shell plates a few years ago and the old one do not work on the newer presses.
|
|
|
|
March 24, 2016, 05:33 PM
|
#6 |
|
Senior Member
Join Date: July 1, 2001
Posts: 6,364
|
Call them. I would bet money you have the high detent issue and need to hammer it in around the edge with a punch.
|
|
|
|
|
|
