Needing a Marlin bulls eye for Mdl 62

Chaparral · June 30, 2021, 02:23 AM

Guys I have looked everywhere for a bulls eye to fit into the stock of a Marlin Mdl 62 Levermatic. Does anyone know where I might find one? Thx.

Scorch · June 30, 2021, 02:51 AM

If you know someone with a lathe you could have one made, but Marlin is gone, and most parts have been snatched up by collectors. You might try the ususal suspects , but I think you will have to have something like that made for you.

Schlitz 45 · June 30, 2021, 08:27 AM

All of the usual places like Midway, Numrich, & even Ebay seem to be out of them. I found some available from a few sites that I have no experience with but for the small amount it might be worth the risk? here's one-
https://www.werisesg.com/index.php?m...ucts_id=320916

Pahoo · June 30, 2021, 11:03 AM

Quote:

I have no experience with but for the small amount it might be worth the risk? here's one-

Schlitz 45
A number of years ago, when I was deep into Marlins, I had to replace a few of these and I used these Bull's-eye sticks. Makes sense since they all have to be hand fitted. I do remember that these stick, use to be longer. ....

Nice catch and;
Be Safe !!!

**4V50 Gary** · July 1, 2021, 11:49 AM

Schlitz45 delivers. That's the way I'd go (rather than making one myself).

FrankenMauser · July 1, 2021, 12:54 PM

There are several people on the MarlinOwners forum that sell Marlin-contracted bullseyes, rather than reproductions, for a reasonable price.
(Like $3, last time I checked. But it has been a while, so don't quote me.)

Dawei is one of them.
https://www.marlinowners.com/members/dawei.195/

June 30, 2021, 02:23 AM	#1
Chaparral Senior Member Join Date: January 14, 2018 Posts: 264	Needing a Marlin bulls eye for Mdl 62 Guys I have looked everywhere for a bulls eye to fit into the stock of a Marlin Mdl 62 Levermatic. Does anyone know where I might find one? Thx.

June 30, 2021, 02:51 AM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,249	If you know someone with a lathe you could have one made, but Marlin is gone, and most parts have been snatched up by collectors. You might try the ususal suspects , but I think you will have to have something like that made for you. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

July 1, 2021, 11:49 AM	#5
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 22,294	Schlitz45 delivers. That's the way I'd go (rather than making one myself). __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

July 1, 2021, 12:54 PM	#6
FrankenMauser Senior Member Join Date: August 26, 2008 Location: In the valley above the plain Posts: 13,770	There are several people on the MarlinOwners forum that sell Marlin-contracted bullseyes, rather than reproductions, for a reasonable price. (Like $3, last time I checked. But it has been a while, so don't quote me.) Dawei is one of them. https://www.marlinowners.com/members/dawei.195/ __________________ -Unwilling Range Officer -Unwilling Match Designer -NRL22/PRS22/PRO -Something about broccoli and carrots

June 30, 2021, 08:27 AM	#3
Schlitz 45 Senior Member Join Date: January 14, 2018 Location: Colorado Posts: 413	All of the usual places like Midway, Numrich, & even Ebay seem to be out of them. I found some available from a few sites that I have no experience with but for the small amount it might be worth the risk? here's one- https://www.werisesg.com/index.php?m...ucts_id=320916