![]() |
![]() |
#1 |
Junior Member
Join Date: November 23, 2019
Posts: 2
|
Thompson T/CR22 Scope
Any suggestions for the height of rings for a Nikon Prostaff Rimfire !! 3-9x40 scope. Thanks
|
![]() |
![]() |
#2 |
Senior Member
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 3,760
|
If you have a grooved receiver you should do well with medium to high rings- the high ones will definitely have enough height for the 40mm bell to clear the barrel.
__________________
You are the bows from which your children as living arrows are sent forth. |
![]() |
![]() |
#3 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Fit the rings to your scope.
Quote:
![]() Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. ![]() |
|
![]() |
![]() |
#4 | |
Senior Member
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 3,760
|
Quote:
Medium height rings should easily get the OP enough clearance for the 40mm objective bell
__________________
You are the bows from which your children as living arrows are sent forth. |
|
![]() |
![]() |
#5 |
Junior Member
Join Date: November 23, 2019
Posts: 2
|
Thanks for all the advice. Think I will go with the Medium. Thanks again to all John
|
![]() |
![]() |
#6 |
Junior Member
Join Date: March 9, 2020
Posts: 1
|
|
![]() |
![]() |
|
|