February 3, 2001, 12:06 PM | #1 |
Senior Member
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,334
|
Hey guys! I just get a bug about shooting flintlock once again. I've had a couple Hawkens and wondered if there were any other bugs out there on TFL?
Anyway, the new Cabelas shooter's catalog has several choice muzzle loaders, including several flints. The one that really got me salivating was a replica of the US Rifle Model of 1803 Harpers Ferry. It is in 54 caliber and has a half stock, similar in appearance to a Hawken but a little cooler to me! My experience in shooting the flint-powered pieces is that it takes a lot of perseverance to get good with them to the extent that they have about a dead certainty of going off. They are much more persnickety than a cap and ball model, as any of you who have shot one much would know. But the satisfaction I got made up for the pains! First, I got the joy of loading it myself with varying charges of powder and patched ball, second the skill of making that one shot count, and third, the luck of having it go off at all! Also, the recoil with a hooked rifle buttplate will make you sit up and take notice! Are there any more fans out there? |
February 5, 2001, 02:58 AM | #2 |
Senior Member
Join Date: March 2, 2000
Posts: 551
|
ck out the tvm line or flintlocks.they are much cheaper and better made than the pedersoli line and have a touch of the patriot.
|
February 5, 2001, 10:17 AM | #3 |
Senior Member
Join Date: December 22, 1998
Location: Plymouth Meeting, PA
Posts: 673
|
I want to second the comment on the TVM line. They are semi-custom made and use Siler locks and Green Mountain barrels. The 1803 replica is a nice looking rifle but the ones I've seen had very shallow rifling more appropriate to shooting a Minie ball.
|
February 5, 2001, 12:59 PM | #4 |
Senior Member
Join Date: March 7, 1999
Location: The Lone Star State
Posts: 1,235
|
TVM
Anyone got a link to the TVM webpage?
Joe |
February 5, 2001, 04:55 PM | #5 |
Staff Alumnus
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
|
I am afraid that I am a fan as well. I have one under construction. .45 cal 42” barrel, Chambers lock, brass trim, Curly maple full stock, 1760-80 Virginia style. I plan to hunt with it next season. The most fun in firearms as far as I’m concerned.
By the way, it has been my experience that the flint lock is a more reliable source of ignition then the #11 caps.
__________________
“This is my rifle, there are many like it but this one is mine …” MOLON LABE ! I’m a G-CODE holster fan ! www.range5.com |
February 6, 2001, 09:25 AM | #6 |
Senior Member
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,334
|
Hi Scott!
Is the #11 the standard size or the musket size? Ain't got any with me but the standard size Remington or CCI work almost as well as a centerfire rifle for me. The CVA caps are hard brass and often will not seat fully on the nipple so there are more fails to fire. Get either Rem or CCI soft copper caps.
I'm surprised you can get yours to work that reliably. Congratulations and have fun! |
February 6, 2001, 01:59 PM | #7 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,425
|
I've been shooting flintlock on and off for years.
I built a T/C Renegade back in the 1980s to use for deer hunting in Pennsylvania, where it's flint only, round ball only, open sights only for primitive season. I REALLY enjoy shooting flintlock, but I never did really enjoy that nasty sour smell that you get after going through a pound of powder. One of the best things I ever did was flatten out two round balls, trim the edges, and use the lead foil to wrap the flint instead of a piece of leather. It held the flint a LOT more firmly and stablely than the leather ever did. The other best thing I did was to luck into some hand knapped English chert flints at a gunshow. I had been using T/C sawn flints before that, and I'd be lucky to get 10 or 15 shots before one was done. With the cherts, the least number of shots I got from one was about 45-50, and the most I got from one took me through an ENTIRE 1-lb. can of black powder plus a little from another can. At 60-grains of FFFg powder, that would have been around 120 to 125 shots! I never though that kind of life would be possible from a flint. |
February 6, 2001, 04:56 PM | #8 |
Staff Alumnus
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
|
# 11 is smaller then the musket primers I believe. The ones I have are made by CCI. I have never been able to get reliable ignition with them in the field. I am wondering if Pyrodex is part of the problem. With the flint however, I rarely ever fail to fire; the caps on the other hand ... one in 5 fails to ignite the main charge.
__________________
“This is my rifle, there are many like it but this one is mine …” MOLON LABE ! I’m a G-CODE holster fan ! www.range5.com |
February 6, 2001, 05:23 PM | #9 |
Senior Member
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,334
|
I often used a "booster charge"
In flint I could get reliable ignition with Pyrodex if I put a 9mm parabellum case worth of FFFg Black powder down the bore first, following it with 80g (or whatever) of Pyrodex and the patched ball. It's a little easier to clean than straight BP. I would assume the booster charge would help your caplock go off easier, too.
You are cleaning out your bolster, of course. HTH |
February 6, 2001, 06:32 PM | #10 |
Senior Member
Join Date: March 2, 2000
Posts: 551
|
http://www.avsia.com/tvm/
this is the link to tvm.i am alos a dealer for there products so drop me a email if you need one. i have a tn rifle in 50 cal 38 inch in stock currently. |
February 7, 2001, 10:59 PM | #11 |
Senior Member
Join Date: January 13, 2000
Location: Richmond, VA
Posts: 936
|
Priming Problems
I've had less than fifty misfires on my .58 "Missippi" rifled musket, and I've had the thing for 27 years. I use German musket caps, and whenever it doesn't detonate I merely cock the hammer and try again, it always shoots. This being the case, and after reading about pyrodex in the flash pan problems with you flintlock guys, I'm convinced that it's the powder. It very well may be a mainspring problem, but it's not big enough a problem to install a new spring.
Here's smoke in your eyes folks, be sure to shoot the eyelash off of a gnat at 20 rods for me. |
February 7, 2001, 11:21 PM | #12 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,425
|
Munroe,
You say you "cock the hammer and try again, it always shoots..." Do you mean that you put on another cap, or do you drop the hammer on the same cap? If the latter, it's most likely a mechanical problem. If the former, then it's probably a pyrodex problem. To all who have been having problems igniting pyrodex, try one of the "Hot Shot" nipples. They can make a WORLD of difference. |
February 8, 2001, 01:43 AM | #13 |
Senior Member
Join Date: March 7, 1999
Location: The Lone Star State
Posts: 1,235
|
gunmart,
Thanks for the link! I'm thinking about getting a pair of 54 caliber Hawkens... that is if I can come up with the dough. Joe |
February 8, 2001, 08:23 PM | #14 |
Senior Member
Join Date: March 2, 2000
Posts: 551
|
dont think you will find any hawken rifles at tvm
just hard core blackpowder folks there. [Edited by gunmart on 02-08-2001 at 11:25 PM] |
February 13, 2001, 10:50 PM | #15 |
Senior Member
Join Date: January 13, 2000
Location: Richmond, VA
Posts: 936
|
Mike,
I drop the hammer on the same cap. I'll get it taken care of when I get home. Thanks for the tip about the "Hot Shot" nipples. |
February 15, 2001, 06:37 PM | #16 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,873
|
I've four flintlock rifles to my name. My first is a Lymans Great Plains in left hand and the second, a 50 caliber rifle I built for myself from parts bought from the Log Cabin Shoppe. There is a unique thing about flint as compared to percussion cap guns. The "click-swoosh-boom!" effect has a charm all its own. It also requires a steadier rifleman than does the percussion gun with its faster ignition time.
On the other extreme though, I also have several Civil War rifled muskets. Compared to the old round ball guns, they are quite accurate at long ranges and those Minie Balls do command respect. |
February 16, 2001, 09:01 AM | #17 |
Senior Member
Join Date: March 2, 2000
Posts: 551
|
ck out the minute man rifles from narragansett arms.they look really great.i am having one built.
|
February 16, 2001, 11:41 AM | #18 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,873
|
Oh yeah, Narragansett Arms does high quality work. I have one of their rifles and while expensive, it's museum quality.
|
February 19, 2001, 04:39 PM | #19 |
Senior Member
Join Date: March 2, 2000
Posts: 551
|
gary,can you email me a photo?
|
February 20, 2001, 11:31 AM | #20 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,873
|
Sorry, but I don't even know how to attach photos (and don't have a digital camera).
|
February 20, 2001, 12:15 PM | #21 |
Staff
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,425
|
Gary,
Have a scanner? Scan your photos, and post them on photopoint.com or one of the other free photo hosting sites. If you need more assistance, e-mail me at [email protected] and I'll walk you through the process.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza Baby Jesus cries when the fat redneck doesn't have military-grade firepower. |
February 20, 2001, 03:13 PM | #22 |
Senior Member
Join Date: November 1, 2000
Location: Texas Hill Country
Posts: 288
|
I have two Thompson Center .50 cal Hawkens - one in cap lock and one flintlock. The caplock has never failed to ignite using Goex black powder and Remington caps. I had trouble with the flintlock at first until I figured out that I needed to run a nipple pick through the vent hole after each shot. It is very reliable doing that. The only other time it failed to ignite was when I forgot to put powder in the pan.
This reminds me of a story. When I got the first rifle and all the loading/cleaning goodies in the mail I spread it all out on the living room floor to take inventory. The wife walked in, took one look and said, "You didn't have enough toys when you were a little boy, did you?" |
February 21, 2001, 05:22 AM | #23 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,873
|
No scanner either Mike. Sorry guys.
|
February 27, 2001, 02:45 PM | #24 |
Senior Member
Join Date: October 17, 2000
Posts: 247
|
I own one flinter. It has been in my family since the Revolution and was a gift to my GGGgrandfather who was a quartermaster under Washington. It's a 'New Land Pattern Horse Pistol'. It's .58 cal and about 19 inches long with a tower lock of Geo.III on it and the name 'Wilot 1761'. When I inherited it it hadn't even been fired in over a hundred years. It cleaned up real nice. Old brass furniture has a beautiful patina. It's a smoothbore. I've fired it with light loads and it's suprizingly accurate. I've loaded it with the buck and ball that it would have been loaded with in combat and what it will do to target at 25 ft is impressive. I don't shoot it much at all any more but it is loaded and ready in the bedroom. I hope I'd never shoot anyone with it but it would make for an interesting story in the newspaper. The powder horns and turnscrew that came with it are very beautiful and are carved with my ancestors name and dates and a map of Virginia. I've never had a misfire or a hanger with it. You just have to mind the flint's edge and the line up with the frizzen over the pan. Moisture in the flash powder will cause a hangfire but I put a little beeswax around the lip of the pan and when it's closed no moisture can get in
|
February 27, 2001, 05:50 PM | #25 |
Staff Alumnus
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
|
Great story!
If possible I would love to see a picture of such a valuable piece of history. If I were you I would have it appraised if you haven’t already. Firearms that are from that period and in good (fireable of all things) condition, verifiably handed down from generation to generation could bring a hefty price in the proper auction. Condition of the piece, documentation and a story with a family connection. WOW!
__________________
“This is my rifle, there are many like it but this one is mine …” MOLON LABE ! I’m a G-CODE holster fan ! www.range5.com |
|
|