358 JDJ/358 Bellm

Contender · October 25, 2000, 10:23 PM

Has anybody done any load development with these cartridges here? What would be a good powder to start with for say 200 or 225 grain bullets?

Thanks for any info.

SKR · October 25, 2000, 11:35 PM

http://www.again.net/~steve/page8a.htm

Contender · October 26, 2000, 10:56 AM

Thanks

gemihur · March 4, 2020, 05:55 PM

Hope your still shootin'
358 JDJ: http://stevespages.com/358_15_250.html

**Unclenick** · March 4, 2020, 06:11 PM

Gemihur,

If you click on the member's name at the left edge of the post you will get a flyout menu that gives you a link you can click on to see the member's public profile. In the public profile, you can click on the Statistics tab, and at the bottom, it shows when the member last logged on. For Contender, it was May 18, 2004, so it is unlikely he will see your post. SKR last logged in on in November 17, 2000, so he is even less likely to see it. Many folks have had their email addresses change since then, so they may not even get notification of the post.

But, hope springs eternal, so never say never.

gemihur · June 30, 2020, 01:50 PM

I like IMR 4198 & IMR 4064
But Mike and Don prefer IMR 4895 & H 322
https://www.bellmtcs.com/blog/358-bellm-load-data/
All these are very safe.
the old 'triad' data was a bit more diverse

ammo.crafter · June 30, 2020, 01:59 PM

Send me a PM and I will dig up all of my .358 Bellm reloading stats and opinions.

gemihur · August 10, 2020, 11:14 AM

It's only been two decades
Might need to refresh post for the JDJ lovers out there
http://benchrest.com/sst/jdj.html

KEYBEAR · August 10, 2020, 04:47 PM

Most all JDJ stuff went out the door in Indiana when Rifle became ok for Deer .
I sold my 358 Out of state just to get a better price .

Woody'sDad · August 12, 2020, 11:15 AM

Go here-------https://www.bellmtcs.com/blog/358-bellm-load-data/

**Unclenick** · August 12, 2020, 06:03 PM

Woody'sDad,

To make an address into a link, just put URL tags around it. They look like this:

[url]http://somesiteofinterest.com[/url]

The first tag, [url] tells the BBS software that what follows is a URL. The second tag adds the "/" in front of "url" to tell the software the end of the URL has been reached and not to consider any additional text as part of the address. All tags on this BBS software work that way. The tags are not case sensitive.

In this instance, I put the tags in for you, so you can click to edit your post and you will see them. When they are in use, they disappear from what is seen in the post.

Woody'sDad · August 13, 2020, 06:55 PM

UncleNick----Thanks Learn something every day

March 4, 2020, 05:55 PM	#4
gemihur Member Join Date: July 5, 2011 Location: VA ridgelines Posts: 52	Loads ... 20 years later! Hope your still shootin' 358 JDJ: http://stevespages.com/358_15_250.html

March 4, 2020, 06:11 PM	#5
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,743	Gemihur, If you click on the member's name at the left edge of the post you will get a flyout menu that gives you a link you can click on to see the member's public profile. In the public profile, you can click on the Statistics tab, and at the bottom, it shows when the member last logged on. For Contender, it was May 18, 2004, so it is unlikely he will see your post. SKR last logged in on in November 17, 2000, so he is even less likely to see it. Many folks have had their email addresses change since then, so they may not even get notification of the post. But, hope springs eternal, so never say never. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle

June 30, 2020, 01:59 PM	#7
ammo.crafter Senior Member Join Date: June 25, 2006 Location: The Keystone State Posts: 2,032	358 Send me a PM and I will dig up all of my .358 Bellm reloading stats and opinions. __________________ "Peace is that brief glorious moment in history when everybody stands around reloading". --Thomas Jefferson

August 12, 2020, 06:03 PM	#11
Unclenick Staff Join Date: March 4, 2005 Location: Ohio Posts: 21,743	Woody'sDad, To make an address into a link, just put URL tags around it. They look like this: [url]http://somesiteofinterest.com[/url] The first tag, [url] tells the BBS software that what follows is a URL. The second tag adds the "/" in front of "url" to tell the software the end of the URL has been reached and not to consider any additional text as part of the address. All tags on this BBS software work that way. The tags are not case sensitive. In this instance, I put the tags in for you, so you can click to edit your post and you will see them. When they are in use, they disappear from what is seen in the post. __________________ Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle

October 25, 2000, 10:23 PM	#1
Contender Senior Member Join Date: December 10, 1998 Location: NY Posts: 680	Has anybody done any load development with these cartridges here? What would be a good powder to start with for say 200 or 225 grain bullets? Thanks for any info.

October 25, 2000, 11:35 PM	#2
SKR Member Join Date: April 9, 2000 Posts: 68	http://www.again.net/~steve/page8a.htm

October 26, 2000, 10:56 AM	#3
Contender Senior Member Join Date: December 10, 1998 Location: NY Posts: 680	Thanks

June 30, 2020, 01:50 PM	#6
gemihur Member Join Date: July 5, 2011 Location: VA ridgelines Posts: 52	I like IMR 4198 & IMR 4064 But Mike and Don prefer IMR 4895 & H 322 https://www.bellmtcs.com/blog/358-bellm-load-data/ All these are very safe. the old 'triad' data was a bit more diverse

August 10, 2020, 11:14 AM	#8
gemihur Member Join Date: July 5, 2011 Location: VA ridgelines Posts: 52	It's only been two decades Might need to refresh post for the JDJ lovers out there http://benchrest.com/sst/jdj.html

August 10, 2020, 04:47 PM	#9
KEYBEAR Senior Member Join Date: January 11, 2012 Location: Indiana Posts: 1,059	Most all JDJ stuff went out the door in Indiana when Rifle became ok for Deer . I sold my 358 Out of state just to get a better price .

August 12, 2020, 11:15 AM	#10
Woody'sDad Member Join Date: October 22, 2018 Posts: 23	Go here-------https://www.bellmtcs.com/blog/358-bellm-load-data/

August 13, 2020, 06:55 PM	#12
Woody'sDad Member Join Date: October 22, 2018 Posts: 23	UncleNick----Thanks Learn something every day