question about powders that meter well for 9mm

jeepster11 · March 4, 2011, 04:50 PM

Alright I have a dillon and use the dillon powder dispencer what is some powders that work well in the dispencer? So far I'm using universal and it works good but what others work well also. Thanks for your help.

rdmallory · March 4, 2011, 05:10 PM

HP38
Ramshot TrueBlue

capbuster · March 4, 2011, 05:36 PM

Power Pistol!

m&p45acp10+1 · March 4, 2011, 06:11 PM

Titegroup meters well from my Lee PPM. I use it for plated 124 grain HP with good results.

overkill0084 · March 4, 2011, 06:27 PM

I haven't tried it myself, but a friend of mine swears by 231 for his 9mm. He uses a Dillon as well.
I use Bullseye & AA#5 primarily, and I have found that they both meter nicely. I bought the AA#5 because I was getting frustrated with Unique and it's lack of metering. HS-6 seems to work well also, but I haven't used very much.

dewcrew8 · March 5, 2011, 05:38 AM

I also have a dillon and use 700x for my 9mm with no problems,I have also used lots of 2400, bullseye, #9, h-2227 ,4895 not for 9mm but for other loads! once its set to that magic number I've had no powder change with the many types of powder.

CrustyFN · March 5, 2011, 10:43 AM

Titegroup
HS-6
Bullseye
WST
231

mineralman55 · March 5, 2011, 10:52 AM

+1 on the HS-6. Great powder.

Ramshot Silhouette for the 9mm also.

Clark · March 6, 2011, 02:52 PM

My favorite 9mm Powder is Power Pistol, but if left in for a while, it etches the green see through powder hopper on an RCBS uniflow powder measure.

huntinaz · March 6, 2011, 03:25 PM

Titegroup, Bullseye, Win231.

Walkalong · March 6, 2011, 09:24 PM

True Blue, AA #5, WSF, HS-6 all meter extremely well.

crowbeaner · March 6, 2011, 09:39 PM

AA #5, #7, 231, WAP, Unique, SR 4756, Power Pistol, Universal, HS-6,Titegroup, and?

NESHOOTER · March 6, 2011, 11:01 PM

Titegroup, for my L & L Hornady progressive. no prob's meters well and always use powdercop die to ensure always have powder in each round.

FrankenMauser · March 7, 2011, 04:23 AM

HP-38, Titegroup.

Surprisingly, Unique meters perfectly in my Dillon.

March 4, 2011, 04:50 PM	#1
jeepster11 Senior Member Join Date: July 3, 2008 Location: fairborn ohio Posts: 175	question about powders that meter well for 9mm Alright I have a dillon and use the dillon powder dispencer what is some powders that work well in the dispencer? So far I'm using universal and it works good but what others work well also. Thanks for your help.

March 4, 2011, 05:36 PM	#3
capbuster Senior Member Join Date: August 8, 1999 Location: Bessemer,Alabama Posts: 302	Power Pistol! __________________ cliff

March 4, 2011, 06:11 PM	#4
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,947	Titegroup meters well from my Lee PPM. I use it for plated 124 grain HP with good results. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

March 5, 2011, 05:38 AM	#6
dewcrew8 Senior Member Join Date: August 7, 2009 Posts: 214	I also have a dillon and use 700x for my 9mm with no problems,I have also used lots of 2400, bullseye, #9, h-2227 ,4895 not for 9mm but for other loads! once its set to that magic number I've had no powder change with the many types of powder. Last edited by dewcrew8; March 5, 2011 at 05:47 AM.

March 5, 2011, 10:52 AM	#8
mineralman55 Member Join Date: September 29, 2009 Location: deep south Posts: 99	Powders That Meter Well +1 on the HS-6. Great powder. Ramshot Silhouette for the 9mm also.

March 4, 2011, 05:10 PM	#2
rdmallory Senior Member Join Date: February 10, 2009 Location: Deltona FL Posts: 953	HP38 Ramshot TrueBlue

March 4, 2011, 06:27 PM	#5
overkill0084 Senior Member Join Date: August 7, 2010 Location: Northern, UT Posts: 1,162	I haven't tried it myself, but a friend of mine swears by 231 for his 9mm. He uses a Dillon as well. I use Bullseye & AA#5 primarily, and I have found that they both meter nicely. I bought the AA#5 because I was getting frustrated with Unique and it's lack of metering. HS-6 seems to work well also, but I haven't used very much.

March 5, 2011, 10:43 AM	#7
CrustyFN Senior Member Join Date: June 4, 2006 Location: West Virginia Posts: 2,258	Titegroup HS-6 Bullseye WST 231

March 6, 2011, 02:52 PM	#9
Clark Senior Member Join Date: December 4, 1999 Location: WA, the ever blue state Posts: 4,678	My favorite 9mm Powder is Power Pistol, but if left in for a while, it etches the green see through powder hopper on an RCBS uniflow powder measure.

March 6, 2011, 03:25 PM	#10
huntinaz Senior Member Join Date: September 21, 2010 Location: az Posts: 1,332	Titegroup, Bullseye, Win231. __________________ "When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy

March 6, 2011, 09:24 PM	#11
Walkalong Senior Member Join Date: May 30, 2007 Location: Al. Posts: 196	True Blue, AA #5, WSF, HS-6 all meter extremely well.

March 6, 2011, 09:39 PM	#12
crowbeaner Senior Member Join Date: June 4, 2007 Location: Upstate SC Posts: 1,943	AA #5, #7, 231, WAP, Unique, SR 4756, Power Pistol, Universal, HS-6,Titegroup, and?

March 6, 2011, 11:01 PM	#13
NESHOOTER Senior Member Join Date: October 16, 2009 Posts: 517	Titegroup, for my L & L Hornady progressive. no prob's meters well and always use powdercop die to ensure always have powder in each round.

March 7, 2011, 04:23 AM	#14
FrankenMauser Senior Member Join Date: August 26, 2008 Location: In the valley above the plain Posts: 13,778	HP-38, Titegroup. Surprisingly, Unique meters perfectly in my Dillon. __________________ -Unwilling Range Officer -Unwilling Match Designer -NRL22/PRS22/PRO -Something about broccoli and carrots