Glocks

Specter40 · January 10, 2011, 11:36 PM

Hey Guys,
This thread is to show your pride for the pistol that never quits! Post a picture to show your Glock pride, and feel free to share worth while modifications!

Glock 23c .40 cal w/ extended slide release and grip plug
Winchester 165gr Dual Bond Bullets
Cold Steel AK-47

jmortimer · January 11, 2011, 12:34 AM

This should be a great thread becauase the Glocks all look so different from each other. I mean all the black and plastic you show-offs

Some day I'll show off my G 36

KChen986 · January 11, 2011, 12:44 AM

Uncle Malice · January 11, 2011, 12:53 AM

I just added another one to my collection tonight. No pics yet, but it's the Glock 21 SF. :-)

stevelyn · January 11, 2011, 08:56 AM

I have a lot of Glock pride, but if you've seen one black polymer pistol, you've seen them all.

The only mods I make are night sights.

DonutGuy · January 11, 2011, 09:00 AM

Texcowboy · January 11, 2011, 10:30 AM

The Trio: G19,G30 and G32.

smince · January 11, 2011, 12:37 PM

G19 w/J-Point RDS:

Burger · January 11, 2011, 12:37 PM

Burger · January 11, 2011, 12:38 PM

Japle · January 11, 2011, 05:00 PM

Here’s my G17 & G19. Both are gen 2, former police weapons with TFO sights.
The slide on the G17 was done in a custom GunKote color by LTM.

I wore the G19 every day for years. It was my nightstand gun. Now I use an XDm 3.8 9mm.

woconnor · January 11, 2011, 05:23 PM

woconnor · January 11, 2011, 05:24 PM

Burger- who does your slides? they look slick.

testuser · January 11, 2011, 05:44 PM

The thread just wouldn't be complete without a photo of the most powerful factory Glock! Glock 20...

precision_shooter · January 11, 2011, 06:29 PM

No Pics on hand but....

Glock 32, gen 3, 3.5lb trigger, no other mods.

Glock 20, gen 2, 3.5lb trigger, hogue slip on grip.

FoxtrotRomeo · January 11, 2011, 06:49 PM

Quote:

Burger- who does your slides? they look slick.

No joke. It looks like a diy job but it looks good.

And since it's a Glock fans powder loaded dream in here I might as well add mine.

Brand spankin new Gen 4 Glock 27

Uncle Malice · January 11, 2011, 09:30 PM

I was looking at the Gen 4 G26/27 today as well. I stopped by Glockmeister to get night sights installed on my new G21SF and they had some in stock. Looks pretty good, but I didn't get to fondle it.

ep2621 · January 11, 2011, 10:18 PM

G17 G26 G20sf G22 G21 G23

hoytinak · January 11, 2011, 10:24 PM

The only Glock I've ever owned that I actually liked...looking to try a Gen 4 19 out though.

Mods:
grip reduction
360 degree stiple
cut out around around mag release
dyed black (it used to be OD green)
smooth trigger out of a G17
Ghost "tactical" 5lbs trigger connector
polished all trigger parts
extended slide release
MeproLight night sights
Wolff steel guide rod/spring
Wolff firing pin spring & plunger spring

FoxtrotRomeo · January 11, 2011, 10:48 PM

Quote:

I was looking at the Gen 4 G26/27 today as well. I stopped by Glockmeister to get night sights installed on my new G21SF and they had some in stock. Looks pretty good, but I didn't get to fondle it.

If you can imagine a more plasticy but still aggressive 25 LPI checkering feel all over your hand as you grip it with a pretty strong recoil spring to work with and a fully supported polygonal rifled barrel, you got a pretty good idea of what it's like. It's pretty nice.

All I've done to mine thus far is polish the feed ramp and chamber, that's it. The feed ramp still looks black but like a really polished black and it's smooth too.

I use a jewelers compound to polish all my barrels, feed ramps, feed lips, etc. Works awesome, like a new piece of glass when I'm done.

turnerdye1 · January 11, 2011, 11:16 PM

1st OD of the thread???? i think so lol

AZAK · January 12, 2011, 04:26 AM

Quote:

but if you've seen one black polymer pistol, you've seen them all

You might try looking at:
http://www.wilsoncombat.com/p_kz45.asp

or:
http://www.wilsoncombat.com/p_specops.htm

A different looking "black polymer pistol" in my book.

Note: I have owned three different Glock models over the years, G29 was my favorite CCW for about 7 years. No disrespect intended in this little "off topic" rabbit trail.

8shot357 · January 12, 2011, 01:16 PM

My Glock in the shower

Burger · January 12, 2011, 03:52 PM

woconnor : Burger- who does your slides? they look slick.

I did it.

The Glock 21sf doesn't feel like a brick anymore.

I rounded the front of the grip
Dehorned the trigger gaurd
Got rid of the rail
Messed with the slide (front and back)
Any a few other touches here and there to make it mine.

gruntrus · January 12, 2011, 06:51 PM

I'll bring up a better shot of more stuff.

January 10, 2011, 11:36 PM	#1
Specter40 Junior Member Join Date: January 8, 2011 Posts: 14	Glocks Hey Guys, This thread is to show your pride for the pistol that never quits! Post a picture to show your Glock pride, and feel free to share worth while modifications! Glock 23c .40 cal w/ extended slide release and grip plug Winchester 165gr Dual Bond Bullets Cold Steel AK-47

January 11, 2011, 12:53 AM	#4
Uncle Malice Senior Member Join Date: May 12, 2009 Location: Phoenix Posts: 4,580	I just added another one to my collection tonight. No pics yet, but it's the Glock 21 SF. :-) __________________ Handguns: 2x Glock 19.4 \| Glock 26.4 \| HK USP 9 \| HK P2000 \| HK VP9 SK \| HK P30 \| CZ Shadow 2 \| CZ P-10 C \| CZ P-07 \| CZP-01 \| S&W 360PD Rifles: DDM4 \| SGL 21 \| SAM7K \| Draco \| PSA PDW SBR \| ASA Side-Charger SBR \| CZ Scorpion K SBR \| Aero M4E1 9" 300blk SBR \| Angstadt Jack9 SBR \| Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP \| Mossberg Shockwave

January 11, 2011, 10:30 AM	#7
Texcowboy Member Join Date: December 21, 2010 Location: Ft Worth, Texas Posts: 85	The Trio: G19,G30 and G32. Last edited by Texcowboy; January 11, 2011 at 10:44 AM.

January 11, 2011, 12:37 PM	#9
Burger Senior Member Join Date: November 2, 2010 Posts: 152	Glock 21sf Burger Edition

January 11, 2011, 12:38 PM	#10
Burger Senior Member Join Date: November 2, 2010 Posts: 152	Glock 27 Burger Edition (med rare, not done yet)

January 11, 2011, 12:34 AM	#2
jmortimer Junior member Join Date: January 24, 2010 Location: South West Riverside County California Posts: 2,763	This should be a great thread becauase the Glocks all look so different from each other. I mean all the black and plastic you show-offs Some day I'll show off my G 36

January 11, 2011, 12:44 AM	#3
KChen986 Senior Member Join Date: May 27, 2007 Location: Ninja Mall Posts: 818

January 11, 2011, 08:56 AM	#5
stevelyn Senior Member Join Date: May 19, 2004 Location: Fairbanksan in exile to Aleutian Hell Posts: 2,655	I have a lot of Glock pride, but if you've seen one black polymer pistol, you've seen them all. The only mods I make are night sights.

January 11, 2011, 09:00 AM	#6
DonutGuy Senior Member Join Date: January 31, 2010 Posts: 327

January 11, 2011, 12:37 PM	#8
smince Junior member Join Date: October 9, 2004 Location: Northeast Alabama Posts: 2,580	G19 w/J-Point RDS:

January 11, 2011, 05:00 PM	#11
Japle Senior Member Join Date: October 12, 2004 Location: Viera, Florida Posts: 1,340	Here’s my G17 & G19. Both are gen 2, former police weapons with TFO sights. The slide on the G17 was done in a custom GunKote color by LTM. I wore the G19 every day for years. It was my nightstand gun. Now I use an XDm 3.8 9mm.

January 11, 2011, 05:23 PM	#12
woconnor Member Join Date: December 31, 2010 Posts: 39

January 11, 2011, 05:24 PM	#13
woconnor Member Join Date: December 31, 2010 Posts: 39	Burger- who does your slides? they look slick.

January 11, 2011, 06:29 PM	#15
precision_shooter Senior Member Join Date: September 8, 2007 Location: DFW, Texas Posts: 2,475	No Pics on hand but.... Glock 32, gen 3, 3.5lb trigger, no other mods. Glock 20, gen 2, 3.5lb trigger, hogue slip on grip.

January 11, 2011, 09:30 PM	#17
Uncle Malice Senior Member Join Date: May 12, 2009 Location: Phoenix Posts: 4,580	I was looking at the Gen 4 G26/27 today as well. I stopped by Glockmeister to get night sights installed on my new G21SF and they had some in stock. Looks pretty good, but I didn't get to fondle it. __________________ Handguns: 2x Glock 19.4 \| Glock 26.4 \| HK USP 9 \| HK P2000 \| HK VP9 SK \| HK P30 \| CZ Shadow 2 \| CZ P-10 C \| CZ P-07 \| CZP-01 \| S&W 360PD Rifles: DDM4 \| SGL 21 \| SAM7K \| Draco \| PSA PDW SBR \| ASA Side-Charger SBR \| CZ Scorpion K SBR \| Aero M4E1 9" 300blk SBR \| Angstadt Jack9 SBR \| Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP \| Mossberg Shockwave

January 11, 2011, 10:18 PM	#18
ep2621 Senior Member Join Date: January 8, 2010 Location: East Texas Posts: 201	G17 G26 G20sf G22 G21 G23

January 11, 2011, 10:24 PM	#19
hoytinak Senior Member Join Date: July 5, 2006 Location: Texas Posts: 5,721	The only Glock I've ever owned that I actually liked...looking to try a Gen 4 19 out though. Mods: grip reduction 360 degree stiple cut out around around mag release dyed black (it used to be OD green) smooth trigger out of a G17 Ghost "tactical" 5lbs trigger connector polished all trigger parts extended slide release MeproLight night sights Wolff steel guide rod/spring Wolff firing pin spring & plunger spring

January 11, 2011, 11:16 PM	#21
turnerdye1 Member Join Date: December 30, 2009 Location: Wabash, In Posts: 92	1st OD of the thread???? i think so lol

January 12, 2011, 03:52 PM	#24
Burger Senior Member Join Date: November 2, 2010 Posts: 152	woconnor : Burger- who does your slides? they look slick. I did it. The Glock 21sf doesn't feel like a brick anymore. I rounded the front of the grip Dehorned the trigger gaurd Got rid of the rail Messed with the slide (front and back) Any a few other touches here and there to make it mine.