Maybe in the wrong place?

Big Dog · April 6, 2008, 11:12 AM

Guy I posted a thread in the handgun forum and maybe should have put it here; not sure so I will add the content below:

Anyone know whereI can buy a factory made trigger for my Tanfoglio Force pistol in .22lr. Can't get them here (NI). Do any of you know where I could get them.

I recently bought this pistol 2nd hand. I have had some firing problems and took it back to my dealer. The smithy felt it was a firing pin issue. We had problem sourcing a new pin so he made one.

Here is what is happening. I have only tried it twice since getting it back:
- 30 rounds Winchester Lazer 22lr - 27 fired 3 needed the hamer re-cocked and then they fired.

- 30 CCI Velositor (???) about 22/23 fired and the others wouldn't work at all with re-cocking. I put them in my rifle and then they fired. So ammo ok.

I would really appreciate some feedback on this because if I can't get a new factor pin I think I will sell it.

ogree · April 6, 2008, 08:07 PM

Don't know if this will help, but this is off their web site.

Distributors in Europe.

http://www.tanfoglio.it/rivenditori....ge=1&id_loc=30

IRLANDA DEL NORD/NORTHERN IRELAND

FIELD & STREAM
30 Killyman Street Moy, Co. Tyrone BT71 7SJ Tel./Fax +44 2887 789 533

You might take a look at the chamber of your barrel, kind of sounds like the edge of the chamber has been peened over slightly from the pistol being dry fired. If this is the problem it is an easy fix and will not require any new parts.

April 6, 2008, 11:12 AM	#1
Big Dog Member Join Date: March 1, 2005 Location: N. Ireland Posts: 60	Maybe in the wrong place? Guy I posted a thread in the handgun forum and maybe should have put it here; not sure so I will add the content below: Anyone know whereI can buy a factory made trigger for my Tanfoglio Force pistol in .22lr. Can't get them here (NI). Do any of you know where I could get them. I recently bought this pistol 2nd hand. I have had some firing problems and took it back to my dealer. The smithy felt it was a firing pin issue. We had problem sourcing a new pin so he made one. Here is what is happening. I have only tried it twice since getting it back: - 30 rounds Winchester Lazer 22lr - 27 fired 3 needed the hamer re-cocked and then they fired. - 30 CCI Velositor (???) about 22/23 fired and the others wouldn't work at all with re-cocking. I put them in my rifle and then they fired. So ammo ok. I would really appreciate some feedback on this because if I can't get a new factor pin I think I will sell it.

April 6, 2008, 08:07 PM	#2
ogree Senior Member Join Date: January 18, 2005 Location: Idaho Posts: 151	Don't know if this will help, but this is off their web site. Distributors in Europe. http://www.tanfoglio.it/rivenditori....ge=1&id_loc=30 IRLANDA DEL NORD/NORTHERN IRELAND FIELD & STREAM 30 Killyman Street Moy, Co. Tyrone BT71 7SJ Tel./Fax +44 2887 789 533 You might take a look at the chamber of your barrel, kind of sounds like the edge of the chamber has been peened over slightly from the pistol being dry fired. If this is the problem it is an easy fix and will not require any new parts.