what is your grouping

ron.brown255 · March 31, 2012, 11:01 AM

what is your grouping and info for your reloads for your favorite pistols my newest one is for my g22 using berry's bullets with 6.8g of blue dot and set at 1.132 oal at 20ft i got a grouping at 1 inch

Jim243 · March 31, 2012, 11:54 AM

Ron nice going on that grouping, what weight 40 S&W bullet are you using and what profile and what mfg?

Jim

Jim243 · March 31, 2012, 11:56 AM

Sorry I just found this

Quote:

i started with hornandy 185gr xtp bullets and blue dot powder

ron.brown255 · March 31, 2012, 06:27 PM

the best grouping i got so far is with 180 gr FP berrys bullets

SauerGrapes · April 1, 2012, 07:55 PM

My fav. load for .45acp. 3.8grs of Amer. Select, 200gr. LSWC, CCI primer with R P brass. 735 fps. C.O.L. 1.250, 2 1/4'' 5 shot group from a rest @25yds.
Shot from a SA ''RO'' 1911. My Gold Cup and SA Loaded are not quite as good with this load, but close enough for me.
I'm just getting started with the .40S&W. 180gr LFP look promising with Unversal Clays powder.

Petespacking · April 1, 2012, 10:54 PM

I get consistent 1" to 1-1/4" groups with three to four bullets holes touching each other out of both of my Smith Performance Center guns when I shoot five round groupings. One is a 1911 and the other is a 945. I load Lazer Cast 200 grain semi-wad cutters with 5.8 grains of Scott 1250, 1.240 COL and CCI primers. I have several pounds of Scott 1250 and a bunch of Solo 1000 for my wifes 9mm. Good stuff!

March 31, 2012, 11:01 AM	#1
ron.brown255 Junior Member Join Date: March 20, 2012 Posts: 8	what is your grouping what is your grouping and info for your reloads for your favorite pistols my newest one is for my g22 using berry's bullets with 6.8g of blue dot and set at 1.132 oal at 20ft i got a grouping at 1 inch

March 31, 2012, 11:54 AM	#2
Jim243 Senior Member Join Date: January 6, 2009 Location: Just off Route 66 Posts: 5,067	Ron nice going on that grouping, what weight 40 S&W bullet are you using and what profile and what mfg? Jim

March 31, 2012, 06:27 PM	#4
ron.brown255 Junior Member Join Date: March 20, 2012 Posts: 8	the best grouping i got so far is with 180 gr FP berrys bullets

April 1, 2012, 07:55 PM	#5
SauerGrapes Senior Member Join Date: March 22, 2009 Location: S.E.PA. Posts: 920	My fav. load for .45acp. 3.8grs of Amer. Select, 200gr. LSWC, CCI primer with R P brass. 735 fps. C.O.L. 1.250, 2 1/4'' 5 shot group from a rest @25yds. Shot from a SA ''RO'' 1911. My Gold Cup and SA Loaded are not quite as good with this load, but close enough for me. I'm just getting started with the .40S&W. 180gr LFP look promising with Unversal Clays powder.

April 1, 2012, 10:54 PM	#6
Petespacking Senior Member Join Date: November 22, 2009 Posts: 108	I get consistent 1" to 1-1/4" groups with three to four bullets holes touching each other out of both of my Smith Performance Center guns when I shoot five round groupings. One is a 1911 and the other is a 945. I load Lazer Cast 200 grain semi-wad cutters with 5.8 grains of Scott 1250, 1.240 COL and CCI primers. I have several pounds of Scott 1250 and a bunch of Solo 1000 for my wifes 9mm. Good stuff!