![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#1 |
Senior Member
Join Date: January 17, 2012
Posts: 108
|
My Armory as promised in another thread
![]() from the top: Rogers and Spencer .44 Remmie with a Howell drop-in conversion cylinder. Pietta Army Police .36 with a Howell gated conversion cylinder ( a challenge to install, Kirst next time! ) Pietta Nickel Navy Marshall .44. Never fired, too pretty to shoot. ![]() Pietta .44 Navy in process of being tuned. Thinking about shortening the barrel on this one to resemble the Cabela's Wells Fargo Pocket Revolver. Really like the style on that one. The grip's a little beat up, I'll have to refinish that. A funny little Twisty derringer .36 I picked up as a kit one day. This still needs to be finished, polished, etc. |
![]() |
![]() |
#2 |
Senior Member
Join Date: April 14, 2008
Location: Stuart, VA
Posts: 2,473
|
Very nice indeed!
__________________
Liberty and freedom often offends those who understand neither. |
![]() |
![]() |
#3 |
Senior Member
Join Date: March 20, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
Nice Sandman
|
![]() |
![]() |
#4 |
Senior Member
Join Date: January 17, 2012
Posts: 108
|
thank you noelf2 and Fingers for your kind words
|
![]() |
![]() |
#5 |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
Nice armory! I agree with you about the Marshall. I'd keep it new and shiny too.
|
![]() |
![]() |
#6 |
Senior Member
Join Date: January 17, 2012
Posts: 108
|
dont know if you can tell from the photo, but the Marshall's cylinder is fluted, a feature i really like
|
![]() |
![]() |
#7 |
Senior Member
Join Date: March 20, 2008
Location: High & Dry in Missouri Ozarks
Posts: 2,113
|
I've got a few of the Marshalls and they clean up real good after firing. Piettas high polish process is pretty good.
|
![]() |
![]() |
#8 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Sandman
Yep....I like them.
__________________
Seek truth. Relax. Take a breath. |
![]() |
![]() |
#9 |
Senior Member
Join Date: February 9, 2007
Posts: 3,101
|
tell me about the Police .36 and the conversion, please!
|
![]() |
![]() |
#10 |
Senior Member
Join Date: January 17, 2012
Posts: 108
|
Gladly.
The loading channel in the frame was easy to cut - just hold the grinding stone in the right spot and make sure the metal doesn't get too warm. By the way, this is for steel frames only the manufacturer stressed, no brassers. The hard part was attaching the ring. Two holes had to be drilled and tapped in the frame for the two attaching screws and this process required a very long drill bit. The manufacturer recommended using a drill guide but I did not buy one. Wish now that I had because I used the gated ring itself as a guide and I had a little difficulty keeping it steady while I drilled. But it all worked out well. The ring and cylinder fit perfectly, timing was excellent, and no other gunsmithing was needed. The original Police cylinder was fluted and I do miss that fluting, but overall I'm happy with the result. That's it in a nutshell, hope my description of the process was coherent. I have since discovered that Hollow Base cartridges are recommended over regular ammo - not that common, but those can be purchased through Cabela's or Midway. |
![]() |
![]() |
|
|